Hostname: page-component-848d4c4894-2pzkn Total loading time: 0 Render date: 2024-05-14T20:35:49.345Z Has data issue: false hasContentIssue false
  • English
  • Français

“Abrasion Resistant Coatings with Ultraviolet Absorption, via sol-gel dipping method.“

Published online by Cambridge University Press:  01 February 2011

Naiming Arfsten  and
Manuel A. Alvarez
Naiming Arfsten
Affiliation:
Brandon Steel, Frank Rodriguez, Hayes Rainier, and Ian Peek. Denglas Technologies LLC. 1259 N. Church St., Moorestown, N1 08057–1169
Manuel A. Alvarez
Affiliation:
Brandon Steel, Frank Rodriguez, Hayes Rainier, and Ian Peek. Denglas Technologies LLC. 1259 N. Church St., Moorestown, N1 08057–1169
Get access

Abstract

Multi-cpoxy functional - glycidyl ether is used as a cross-linking epoxy compound between modified 22'44'-tetrahydroxybenzophenone and silicone molecules. The adduct reaction products, as effective abrasion resistant coatings and yet reactive in the sol gel process, are formulated into the colloidal based polysiloxane resin as an essential part of the solution for dip coating sheets. Such coatings incorporate ultraviolet radiation selection or absorbing compounds with superb chemical stability and mechanical strength for coatings on substrates such as glass. The hardness of these coatings was measured at 6H following ASTM (D-3363) film hardness by pencil test. The resulting coatings were exposed to ultraviolet (UV-A) radiation during a time greater than 600 hours. The exposed samples still maintain excellent absorption in the UV range.

Keywords

Sol-gelAbrasion resistantUltraviolet absorption
Type
Research Article
Information
MRS Online Proceedings Library (OPL) , Volume 847: Symposium EE – Organic/Inorganic Hybrid Materials , 2004 , EE13.44
Copyright
Copyright © Materials Research Society 2005

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1. Handbook of Material Weathering, Wypych, George, ed., Williams Andre Publishing, ChemTec Publishing, Toronto & New York, 2003.Google Scholar
2. MIL - C – 675c, Section 4.5.10 – Eraser Rub Test. Standard Test Method for Determining Abrasion Resistance of Coating on Glass Substrates.Google Scholar
3. MIL - C – 48497A, Section 4.5.3.1 – Tape Test. Standard Test Method for Determining Coating Adhesion on Glass Substrates.Google Scholar
4. D3363–92a – American Standard Test Method for Film Hardness by Pencil Test.Google Scholar
5. ASTM G154–00a1 – Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmctallic Materials, adopted 2000.Google Scholar
6. ASTM D 4587–01 – Standard Practice for Fluorescent LJV-Condensation Exposures of Paint and Related Coatings, adopted 2001.Google Scholar