Hostname: page-component-848d4c4894-2xdlg Total loading time: 0 Render date: 2024-07-04T03:47:10.290Z Has data issue: false hasContentIssue false

Microstructural Aspects of Materials for Nondestructive Long-Pulse High-Field Magnets

Published online by Cambridge University Press:  29 November 2013

Get access

Extract

The development of high-field magnets for pulsed-field applications is the subject of considerable research activity throughout the world. Induced field strengths in excess of 30 T can be produced only as pulses generated by the discharge of energy, e.g., from a capacitor bank into a resistive solenoid. A variety of electromagnetic design issues relate to the pulse duration, field strength, and volume of the coil; however, from the viewpoint of materials selection and coil design, there are two salient property requirements: (1) high electrical conductivity to minimize the temperature rise due to the flow of current in the coil, and (2) high mechanical strength to resist the Lorentz forces exerted during the pulse. Such forces can result in catastrophic failure, as illustrated in Figure 1, because the coil is, in essence, stressed in the manner of an internally pressured cylindrical vessel. At lower stresses, plastic distortion of the coil is observed.

Type
Materials Science in High Magnetic Fields
Copyright
Copyright © Materials Research Society 1993

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Herlach, F., I.E.E.E. Transactions on Magnetics 24 (1988) p. 1049.Google Scholar
2.Foner, S., Int. J. Appl. Electromagn. Mater. 1 (1990) p. 111.Google Scholar
3.Pelton, A.R., Laabs, F.C., Spitzig, W.A., and Cheng, C.C., Ultramicroscopy 22 (1987) p. 251.CrossRefGoogle Scholar
4.Verhoeven, J.D., Downing, H.L., Chumbley, L.S., and Gibson, E.D., J. Appl. Phys. 65 (1989) p. 1293.CrossRefGoogle Scholar
5.Verhoeven, J.D., Spitzig, W.A., Schmidt, F.A., and Krotz, P.D., J. Mater. Sci. 24 (1989) p. 1015.CrossRefGoogle Scholar
6.Sakai, Y., Inoue, K., Asano, T., and Maeda, H., I.E.E.E. Trans. Magn. 28 (1992) p. 888.Google Scholar
7.Everett, R.K., Scripta Metall. 22 (1988) p. 1227.CrossRefGoogle Scholar
8.Blatt, F.J., Physics of Electronic Conduction in Solids (McGraw-Hill, 1968).Google Scholar
9.Fickett, F.R., Cryogenics 11 (1971) p. 349.CrossRefGoogle Scholar
10.Frommeyer, G. and Wassermann, G., Acta Metall. 23 (1975) p. 1358.CrossRefGoogle Scholar
11.Frommeyer, G. and Wassermann, G., Phys. Status Solidi A 27 (1975) p. 101.Google Scholar