Hostname: page-component-848d4c4894-mwx4w Total loading time: 0 Render date: 2024-06-27T10:45:48.944Z Has data issue: false hasContentIssue false
  • English
  • Français

Magnetic Recording Head Materials

Published online by Cambridge University Press:  29 November 2013

James A. Brug ,
Thomas C. Anthony  and
Janice H. Nickel
Get access

Extract

The materials used in magnetic recording heads have recently received a tremendous amount of attention. This has been the result of a fortunate set of circumstances. Ever-increasing demands for information storage, especially for graphics-intensive applications, have necessitated unprecedented increases in disk-drive areal densities. Combined with this are recent discoveries in the area of magnetoresistive materials, enabling the design and fabrication of much more sensitive recording heads. The end result is a flurry of activity that has come to dominate the field of magnetics. This article will explore choices for magnetoresistive read head materials, with an emphasis on the materials challenges.

The recording heads that are used in high-performance disk drives typically consist of separate magnetoresistive read and inductive write heads (see Figure 1) where previously a single inductive head performed both functions. Separation of the two heads allows each to be optimized for their individual function, an essential factor in enabling disk drives to contain gigabytes of storage. The write head is the simpler of the two, consisting of a U-shaped ferromagnet surrounding a set of coils. The ends of the ferromagnet are the magnetic poles defining the write gap. When current passes through the coils, a field bridges the gap, setting the orientation of the magnetization in the media. Information is stored by changing the polarity of the current in order to write a pattern of magnetic domains in the media. The materials used in write poles will be reviewed in the section, Write Head Materials.

Type
Ultrahigh-Density Information-Storage Materials
Information
MRS Bulletin , Volume 21 , Issue 9 , September 1996 , pp. 23 - 27
Copyright
Copyright © Materials Research Society 1996

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Tsang, C., Santini, H., McCown, D., Lo, J., and Lee, R., IEEE Trans. Magn. 32 (1996) p. 7.CrossRefGoogle Scholar
2.Anthony, T.C., Naberhuis, S.L., Brug, J.A., Bhatacharyya, M.K., Tran, L.T., Hesterman, V.W., and Lopatin, G.G., IEEE Trans. Magn. 30 (1994) p. 303.CrossRefGoogle Scholar
3.Jander, A., Brug, J., Nickel, J., and Indeck, R., Proc. Intermag '96 (Seattle) in press.Google Scholar
4.Tsang, C., IEEE Trans. Magn. 25 (1989) p. 3692.CrossRefGoogle Scholar
5.Baibich, M., Broto, J., Fert, A., Van Dau, F. Nguyen, and Petroff, F., Phys. Rev. Lett. 61 (1988) p. 2472.CrossRefGoogle Scholar
6. For reviews see White, R.L., IEEE Trans. Magn. 28 (1992) p. 2482; R.E. Camley and R.L. Stamps, J. Phys. Cond. Mater. 5 (1993) p. 3727; G.A. Prinz, Phys. Today 48 (1995) p. 58.CrossRefGoogle Scholar
7.Camblong, H.E., Levy, P.M., and Zhang, S., Phys. Rev. B 51 (1995) p. 16052; L.M. Falicov and R. Hood, J. Appl. Phys. 76 (1994) p. 6595.CrossRefGoogle Scholar
8.Grunberg, P., Schreiber, R.S., Pang, Y., Brodsky, M.B., and Sowers, H., Phys. Rev. Lett. 57 (1986) p. 2442; S.S.P. Parkin, J. Appl. Phys. 67 (1991) p. 3598.CrossRefGoogle Scholar
9.Berkowitz, A.E., Mitchell, J.R., Carey, M.J., Young, A.P., Zhang, S., Spada, F.E., Parker, F.T., Hutten, A., and Thomas, G., J. Appl. Phys. 68 (1992) p. 3745; J.Q. Xiao, J.S. Jiang, C.L. Chien, J. Appl. Phys. p. 3749.Google Scholar
10.Hylton, T.L., Coffey, K.R., Parker, M.A., and Howard, J.K., Science 261 (1993) p. 1021.CrossRefGoogle Scholar
11.Dieny, B., Speriosu, V.S., Metin, S., Parkin, S.S.P., Gurney, B.A., Baumgart, P., and Wilhoit, D.R., J. Appl. Phys. 69 (1991) p. 4774; C. Tsang, R.E. Fontana, T. Lin, D.E. Heim, V.S. Speriosu, B.A. Gurney, and MX. Williams, IEEE Trans. Magn. 30 (1994) p. 3801; Y. Hamakawa, H. Hoshiya, T. Kawabe, Y. Suzuki, R. Arai, K. Nakamoto, M. Fuyama, and Y. Sugita, IEEE Trans. Magn. 32 (1996) p. 149.CrossRefGoogle Scholar
12.Anthony, T.C., Brug, J.A., and Zhang, S., IEEE Trans. Magn. 30 (1994) p. 3819.CrossRefGoogle Scholar
13.Egelhoff, W.F. Jr., Ha, T., Misra, R.D.K., Kadmen, Y., Nir, J., Powell, C.J., Stiles, M.D., McMichael, R.D., Lin, C-L., Sivertsen, J.M., Judy, J.H., Takano, K., Berkowitz, A.E., Anthony, T.C., and Brug, J.A., J. Appl. Phys. 78 (1995) p. 273.CrossRefGoogle Scholar
14.Meiklejohn, W.H. and Bean, C.P., Phys. Rev. 102 (1956) p. 1413; Phys. Rev. 105 (1957) p. 904.CrossRefGoogle Scholar
15.Nakatani, R., Hoshino, H., Noguchi, S., and Sugita, Y., Jpn. J. Appl. Phys. 33 (1994) p. 133.CrossRefGoogle Scholar
16.Tsang, T. and Lee, K., J. Appl. Phys. 53 (1982) p. 2605.CrossRefGoogle Scholar
17.Hamakawa, Y., Hoshiya, H., Kawabe, T., Suzuki, Y., Arai, R., Nakamoto, K., Fuyama, M., and Sugita, Y., IEEE Trans. Magn. 32 (1996) p. 149.CrossRefGoogle Scholar
18.Lin, T., Mauri, D., Staud, N., Hwang, C., Howard, K., and Gorman, G., Appl. Phys. Lett. 65 (1994) p. 1183.CrossRefGoogle Scholar
19.Devasahayam, A. and Kryder, M., Proc. Intermag '96 (Seattle) in press.Google Scholar
20.Jin, S., Tiefel, T.H., McCormack, M., Gastnacht, R.A., Ramesh, R., and Chen, L.H., Science 264 (1994) p. 413.CrossRefGoogle Scholar
21.Verelst, M., Rangavital, N., Rao, C.N.R., and Rousset, A., J. Solid State Chem. 104 (1993) p. 74.CrossRefGoogle Scholar
22.Wollan, E.O. and Koehler, W.C., Phys. Rev. 100 (1955) p. 545.CrossRefGoogle Scholar
23.Hwang, H.Y., Cheong, S-W., Radaelli, P.G., Marezio, M., and Batlogg, B., Phys. Rev. Lett. 75 (1995) p. 914.CrossRefGoogle Scholar
24.Hundley, M.F., Neumeier, J.J., Heffner, R.H., Jia, Q.X., Wu, X.D., and Thompson, J.D., J. Appl. Phys. in press.Google Scholar
25.Chang, C., Sivertsen, J.M., and Judy, J.H., IEEE Trans. Magn. 23 (1987) p. 3636.CrossRefGoogle Scholar
26.Ishiwata, N., Wakabayashi, C., and Urai, H., J. Appl. Phys. 69 (1991) p. 5616; G. Qui, E. Haftek, and J.A. Bernard, J. Appl. Phys. 73 (1993) p. 6573.CrossRefGoogle Scholar
27.Wang, S., Obermyer, K.E., and Kryder, M.K., J. Appl. Phys. 27 (1991) p. 4879.Google Scholar
28.Ochiai, Y., Hayakawa, M., Hayashi, K., and Aso, K., J. Appl. Phys. 63 (1988) p. 5424.CrossRefGoogle Scholar
29.Johnson, P., Kautzky, M., Mancoff, F., Kondo, R., Clemens, B., and White, R., Proc. Intermag '96 (Seattle) in press.Google Scholar
30.Moodera, J.S., Wong, T.M., Kinder, L.R., and Meservey, R., Phys. Rev. Lett. 74 (1995) p. 3273.CrossRefGoogle Scholar
31.Monsma, D.J., Lodder, J.C., Popma, Th.J.A., and Dieny, B., Phys. Rev. Lett. 74 (1995) p. 5260.CrossRefGoogle Scholar