Hostname: page-component-77c89778f8-gq7q9 Total loading time: 0 Render date: 2024-07-17T13:50:31.511Z Has data issue: false hasContentIssue false
  • English
  • Français

FGM Fabrication by Combustion Synthesis

Published online by Cambridge University Press:  29 November 2013

Gregory C. Stangle  and
Yoshinari Miyamoto
Get access

Extract

FGMs have been fabricated using the combustion synthesis (or self-propagating high-temperature synthesis (SHS)) process by exploiting a rapid and exothermic chemical reaction, in order to synthesize some (or all) of the constituents in an FGM to simultaneously increase its density. The thermal energy required to drive the process is derived from this internal, chemical source, rather than from an external and usually expensive source (e.g., a furnace). The combustion synthesis process is a powder-based process that has been used to synthesize over 300 compounds, and is particularly useful in preparing materials such as highly refractory ceramics and high-temperature intermetallics that are difficult to prepare by other synthesis methods. In addition, the process can be used to prepare ceramic-metal and ceramic-intermetallic composite materials. As a result, only slight modifications of the combustion synthesis are required to prepare functionally gradient materials from these same combinations of materials.

Sample preparation begins by the creation of a series of mixtures from the powders that will react to form the constituent materials of the FGM sample. Each of these mixtures contains a slightly different percentage of reactants, so that each mixture will yield its own (predetermined) volume fraction of each of its constituents, following the combustion synthesis process. Prior to the combustion step, the samples are assembled by stacking layers of each of the reactant powder mixtures in appropriate amounts, in such a way that the multilayered powder mixture will faithfully produce the composition gradient that is required in the resultant FGM.

Type
Functionally Gradient Materials
Information
MRS Bulletin , Volume 20 , Issue 1 , January 1995 , pp. 52 - 53
Copyright
Copyright © Materials Research Society 1995

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Munir, Z.A., Mater. Sci. Rep. 3 (1989) p. 277.CrossRefGoogle Scholar
2.Zhang, Y. and Stangle, G.C., J. Mater. Res. 10 (1994) p. 2592.CrossRefGoogle Scholar
3.Zhang, Y. and Stangle, G.C., J. Mater. Res. 10 (1994) p. 2605.CrossRefGoogle Scholar
4.Niedzialek, S.E., Stangle, G.C., and Kaieda, Y., J. Mater. Res. 8 (1993) p. 2026.CrossRefGoogle Scholar
5.Niedzialek, S.E., Stangle, G.C., and Kaieda, Y., Int. J. SHS 2 (1993) p. 269.Google Scholar
6.Miyamoto, Y., Nakanishi, H., Tanaka, I., Okamoto, T., and Yamada, O., in Proc. First US-Japanese Workshop on Combustion Synthesis, edited by Kaieda, Y. and Holt, J.B. (Tsukuba Science City, Japan, 1990).Google Scholar
7.Miyamoto, Y., Takakura, T., Tanihata, K., Tanaka, I., Yamada, O., Saito, M., and Takahashi, H., in Proc. FGM '90, edited by Yamanouchi, M., Koizumi, M., Hirai, T., and Shiota, I. (Sendai, Japan, 1990) p. 169.Google Scholar
8.Miyamoto, Y., Takakura, T., Tanihata, K., Tanaka, I., Yamada, O., Saito, M., and Takahashi, H., in Proc. FGM '90, edited by Yamanouchi, M., Koizumi, M., Hirai, T., and Shiota, I. (Sendai, Japan, 1990) p. 257.Google Scholar
9.Miyamoto, Y. and Koizumi, M., in Combustion and Plasma Synthesis of High-Temperature Materials, edited by Munir, Z.A. and Holt, J.B., (VCH, New York, 1990).Google Scholar
10.Miyamoto, Y., presentation made at the International Forum on Fine Ceramics, Nagoya, Japan, March 12–13, 1990.Google Scholar
11.Matsuzaki, Y., Fujioka, J., Minakata, S., and Miyamoto, Y., in Proc. FGM '90, edited by Yamanouchi, M., Koizumi, M., Hirai, T., and Shiota, I. (Sendai, Japan, 1990) p. 263.Google Scholar
12.Yanagisawa, N., Sata, N., and Sanada, N., in Proc. FGM '90, edited by Yamanouchi, M., Koizumi, M., Hirai, T., and Shiota, I. (Sendai, Japan, 1990) p. 179.Google Scholar
13.Sata, N., Nagata, K., Yanagisawa, N., Asano, O., and Sanada, N., in Proc. First US-Japanese Workshop on Combustion Synthesis, edited by Kaieda, Y. and Holt, J.B. (Tsukuba Science City, Japan, 1990) p. 139.Google Scholar
14.Matsuzaki, Y., Hino, H., Fujioka, J., and Sata, N., in Proc. First US-Japanese Workshop on Combustion Synthesis, edited by Kaieda, Y. and Holt, J.B. (Tsukuba Science City, Japan, 1990) p. 89.Google Scholar
15.Sata, N., Sanada, N., Hirano, T., and Niino, M., in Combustion and Plasma Synthesis of High-Temperature Materials, edited by Munir, Z.A. and Holt, J.B. (VCH, New York, 1990).Google Scholar
16.Fu, Z.F., Yuan, R.Z., and Yang, Z.L., in Proc. FGM '90, edited by Yamanouchi, M., Koizumi, M., Hirai, T., and Shiota, I. (Sendai, Japan, 1990).Google Scholar
17.Fujioka, J. and Matsuzaki, Y., presentation made at the Ninth Workshop, Functionally Gradient Material Research Association, Tokyo, Japan, May 22, 1990.Google Scholar
18.Shiota, I., in Proc. Intl. Workshop FGM (San Francisco, CA, November 5–6, 1992) p. 255.Google Scholar
19.Watanabe, R., Kumakawa, A., and Niino, M., in Proc. Intl. Workshop FGM (San Francisco, CA, November 5–6, 1992) p. 323.Google Scholar
20.Miyamoto, Y., Tanihata, K., and Hirano, K., in Proc. 35th Congress on Mater. Res. (Kyoto, Japan, 1992).Google Scholar