Hostname: page-component-76fb5796d-45l2p Total loading time: 0 Render date: 2024-04-27T04:11:54.268Z Has data issue: false hasContentIssue false
  • English
  • Français

Advances in Characterization of CMP Consumables

Published online by Cambridge University Press:  31 January 2011

Mansour Moinpour ,
Alex Tregub ,
Andrea Oehler  and
Ken Cadien
Get access

Abstract

Chemical–mechanical polishing, or planarization (CMP), has emerged as an increasingly important technology for integrated-circuit manufacturing. Consumables used during CMP interact in a complex manner with the polishing tool, the process conditions, and the wafer being polished. In this article, several advanced analytical methods are used to analyze the properties of slurries and pads under conditions similar to those found during CMP processing. Some of the key findings are that under these process conditions, pads can be stabilized with a heat treatment prior to installation on the polisher; pads absorb slurries at different rates, and slurries also react with the pads; and the mechanical properties of the pads are dependent on the orientation of the grooves on the pad. Dynamic rheometry was used to detect de-agglomeration in sheared slurries.

Keywords

chemical–mechanical planarizationchemical–mechanical polishingCMPconsumablesintegrated-circuit (IC) fabricationpolymer characterizationrheology.
Type
Research Article
Information
MRS Bulletin , Volume 27 , Issue 10: Advances in Chemical-Mechanical Planarization , October 2002 , pp. 766 - 771
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Moinpour, M., Tregub, A., Sorooshian, J., Oehler, A., Golzarian, R., Rawat, A., Miller, A., Fischer, P., Feller, D., and Cadien, K., “Challenges in CMP Consumables Characterization,” presented at the Clarkson University CAMP 6th International Symposium on CMP, Lake Placid, NY, August 2001.Google Scholar
2.Renteln, P., Thomas, M., and Pierce, J., in Proc. VLSI Multilevel Interconnection Conf. (VMIC) 1990 (Institute of Electrical and Electronics Engineers, Piscataway, NJ, 1990) p. 57.Google Scholar
3.Davari, B., Koburger, C., Furukawa, T., Taur, Y., Noble, W., Megdanis, A., Warnock, J., and Mauer, J., in IEDM Tech. Dig. (Institute of Electrical and Electronics Engineers, Piscataway, NJ, 1989) p. 92.Google Scholar
4.Koh, G.H., Ha, D.W., Cho, C.H., Jeong, H.S., Jeong, G.T., Yang, W.S., Lee, K.H., Lee, J.G., Park, B.J., Lee, J.K., Bae, J.S., Sim, J.H., and Kim, K.N., in Proc. CMP-MIC, 1998, p. 15.Google Scholar
5.Barla, K., Gounelle, C., Lair, C., Lafarges, Y., Lasserre, V., Lis, S., Maddalon, C., Verove, C., Lous, E., Morand, Y., Passemard, G., Pires, F., and Demolliens, O., in Proc. VMIC (Institute of Electrical and Electronics Engineers, Piscataway, NJ, 1998) p. 25.Google Scholar
6.Rutten, M. and Huynh, C., presented at the SRC Topical Conference on CMP, July 1995.Google Scholar
7.Kaufman, F.B., Thompson, D.B., Broadie, R.E., Jaso, M.A., Guthrie, W.L., Pearson, D.J., and Small, M.B., J. Electrochem. Soc. 138 (11) (1991) p. 3460.CrossRefGoogle Scholar
8.Sivaram, S., Bath, H., Legget, R., Maury, A., Monnig, K., and Tolles, R., Solid State Technol. (1992) p. 87.Google Scholar
9.Edelstein, D., Heidenreich, J., Goldblatt, R., Cote, W., Uzoh, C., Lustig, N., Roper, P., McDevitt, T., Motsiff, W., Simon, A., Dukovic, J., Wachnik, R., Rathore, H., Schulz, R., Su, L., Luce, S., and Slattery, J., in IEDM Tech. Dig. (Institute of Electrical and Electronics Engineers, Piscataway, NJ, 1997) p. 773.Google Scholar
10.Goldblatt, R.D., Agarwala, B., Anand, M.B., Barth, E.P., Biery, G.A., Chen, Z.G., Cohen, S., Connolly, J.B., Cowley, A., Dalton, T., Das, S.K., Davis, C.R., Deutsch, A., DeWan, C., Edelstein, D.C., Emmi, P.A., Faltermeier, C.G., and Fitz-simmons, J.A., in Proc. Int. Interconnect Technol. Conf. (Institute of Electrical and Electronics Engineers, Piscataway, NJ 2000) p. 261.Google Scholar
11.Tsai, T.C., Leung, P., Lin, K.C., Naujok, M., Clevenger, L.A., and Chan, H.C., in Proc. CMP-MIC (2002) p. 19.Google Scholar
12.Gotkis, Y., Wei, D., and Kistler, R. (private communication).Google Scholar
13.Philipossian, A., Moinpour, M., and Oehler, A., in Proc. CMP-MIC (1996) p. 13.Google Scholar
14.Ouma, D.O., Stine, B.E., Divecha, R., Boning, D.S., Chung, J.E., Shinn, G.B., Ali, I., and Clark, J., in Proc. SPIE Microelectronics Conf., Microelectronic Device Technology (SPIE—The International Society for Optical Engineering, Bellingham, WA, 1997) p. 1.Google Scholar
15.Steigerwald, J.M., Murarka, S.P., and Gutmann, R.J., Chemical Mechanical Planarization of Microelectronics Materials (John Wiley & Sons, New York, 1997).CrossRefGoogle Scholar
16.Tregub, A., Moinpour, M., and Sorooshian, J., in Proc. CMPUG Annu. Symp. (2001).Google Scholar
17.Tregub, A., Moinpour, M., and Sorooshian, J., in Proc. 18th VLSI Multilevel Interconnection Conf. (VMIC) 2001, p. 275.Google Scholar
18.Tregub, A. and Moinpour, M., “Challenges in Characterization of CMP Consumables,” presented at the AVS 3rd Int. Conf. on Microelectronics and Interfaces, San Jose, Calif., February 2002.Google Scholar
19.Tregub, A., Moinpour, M., and Sorooshian, J., “Effect of Slurry Conditioning and Temperature Treatment on the Properties of CMP Pads,” presented at Symposium I, Materials Research Society Meeting, San Francisco, April 2002.Google Scholar
20.Luo, J. and Dornfeld, D.A., IEEE Trans. Semicond. Manuf. 14 (2) (2001) p. 112.Google Scholar
21.Wang, Y.-L., Liu, C., Feng, M.-S., and Tseng, W.-T., Mater. Chem. Phys. 52 (1998) p. 17.CrossRefGoogle Scholar
22.Shi, F.G. and Zhao, B., Appl. Phys. A 67 (1998) p. 249.CrossRefGoogle Scholar
23.Lawing, A.S., “Pad Conditioner Surface Characteristics, Pad Surface Morphology, and Polish Performance: Rodel's Effort in Pad Conditioner Development,” Poster Presentation, Semicon West, San Francisco, July 2001.Google Scholar
24.Li, W., Shin, D.-W., Tomozawa, M., and Murarka, S.P., Thin Solid Films 270 (1995) p. 601.CrossRefGoogle Scholar
25.Nielsen, L.E. and Landel, R.F., Mechanical Properties of Polymers and Composites, 2nd ed. (Marcel Dekker, New York, 1991) p. 141.Google Scholar
26.Tregub, A., Inglehart, L., Pham, C., and Friedrich, R., in Proc. 29th Int. SAMPE Tech. Conf. (Society for the Advancement of Material and Process Engineering, Covina, CA, 1997) p. 787.Google Scholar
27.Oehler, A.C. and Flores-Snyder, C., “Characterization of Silica Slurry Agglomeration in Response to Applied Shear Stress,” presented at the Clarkson University CAMP 4th International Symposium on CMP, Lake Placid, NY, August 1999.Google Scholar
28.Flores-Snyder, C., Oehler, A.C., and Malik, V., “Effects of Particles >0.5μm in Oxide Slurry on STI Polish Process Performance,” presented at the Clarkson University CAMP 3rd International Symposium on CMP, Lake Placid, NY, August 1998.Google Scholar
29.Larson, R.G. and Gubbins, K.E., Structure and Rheology of Complex Fluids (Oxford University Press, New York, 1999).Google Scholar
30.Tseng, W.-T., Liu, C.-W., Dai, B.-T., and Yeh, C.-F., Thin Solid Films 290–291 (1996) p. 58.Google Scholar
31.Zhou, Y.-Y. and Davis, E.C., Mater. Sci. Eng., B 68 (1999) p. 91.CrossRefGoogle Scholar
32.Thakurta, G., Borst, C.L., Schwendeman, D.W., Gutmann, R.J., and Gill, W.N., Thin Solid Films 366 (2000) p. 181.CrossRefGoogle Scholar
33.Shen, C. and Springer, G.S., J. Compos. Mater. 10 (1976) p. 2.CrossRefGoogle Scholar
34.Tregub, A. and Renolayan, A., in Proc. 1st Int. Conf. on the Durability of Composites for Construction (CDCC'98), edited by Benmokrane, B. and Rahman, H., (Dept. of Civil Engineering, University of Sherbroke, Sherbrooke, Quebec, Canada, 1998) p. 129.Google Scholar
35.Huey, S., Mear, S.T., Wang, Y., Jin, R.R., Ceresi, J., Freeman, P., Johnson, D., Vo, T., and Eppert, S., in Proc. 1999 IEEE/SEMI Advanced Semiconductor Manufacturing Conf. (Institute of Electrical and Electronics Engineers, Piscataway, NJ, 1999) p. 54.Google Scholar
36.Coppeta, J., Racz, L., Philipossian, A., Kaufman, F., and Rogers, C., presented at the 3rd Int. Chemical Mechanical Planarization for VLSI Multilevel Interconnection Conf., Santa Clara, CA, February 1998.Google Scholar