Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by
Crossref.
Terashima, S.
Tanaka, M.
and
Tatsumi, K.
2008.
Thermal fatigue properties and grain boundary character distribution in Sn–x Ag–0˙5Cu (x = 1, 1˙2 and 3) lead free solder interconnects.
Science and Technology of Welding and Joining,
Vol. 13,
Issue. 1,
p.
60.
Arfaei, B.
Xing, Y.
Woods, J.
Wolcott, J.
Tumne, P.
Borgesen, P.
and
Cotts, E.
2008.
The effect of Sn grain number and orientation on the shear fatigue life of SnAgCu solder joints.
p.
459.
Zhou, Bite
Bieler, Thomas R.
Lee, Tae-Kyu
and
Liu, Kuo-Chuan
2009.
Methodology for Analyzing Slip Behavior in Ball Grid Array Lead-Free Solder Joints After Simple Shear.
Journal of Electronic Materials,
Vol. 38,
Issue. 12,
p.
2702.
Eriksson, Bo
and
Trankell, Richard
2009.
Lead-free soldering of telecommunication network infrastructure products.
p.
1.
Cuddalorepatta, Gayatri
and
Dasgupta, Abhijit
2009.
Effect of Cyclic Damage on the Constitutive Behavior & Microstructure of Sn3.0Ag0.5Cu (SAC305) Solder.
MRS Proceedings,
Vol. 1158,
Issue. ,
Lee, Tae-Kyu
Liu, Kuo-Chuan
and
Bieler, Thomas R.
2009.
Microstructure and Orientation Evolution of the Sn Phase as a Function of Position in Ball Grid Arrays in Sn-Ag-Cu
Solder Joints.
Journal of Electronic Materials,
Vol. 38,
Issue. 12,
Zamiri, A.
Bieler, T.R.
and
Pourboghrat, F.
2009.
Anisotropic Crystal Plasticity Finite Element Modeling of the Effect of Crystal Orientation and Solder Joint Geometry on Deformation after Temperature Change.
Journal of Electronic Materials,
Vol. 38,
Issue. 2,
p.
231.
Cuddalorepatta, Gayatri
and
Dasgupta, Abhijit
2009.
Effect of cyclic fatigue damage accumulation on the elastic-plastic properties of SAC305 solders.
p.
1.
Arfaei, Babak
and
Cotts, Eric
2009.
Correlations Between the Microstructure and Fatigue Life of Near-Eutectic Sn-Ag-Cu Pb-Free Solders.
Journal of Electronic Materials,
Vol. 38,
Issue. 12,
p.
2617.
Saka, M.
Kohara, T.
Hasegawa, T.
and
Yamashita, M.
2009.
A simple method for testing the electromigration resistance of solders.
Microsystem Technologies,
Vol. 15,
Issue. 1,
p.
17.
Bieler, Thomas R.
Lee, Tae-kyu
and
Liu, Kuo-Chuan
2009.
Methodology for Analyzing Strain States During In Situ Thermomechanical Cycling in Individual Lead-Free Solder Joints Using Synchrotron Radiation.
Journal of Electronic Materials,
Vol. 38,
Issue. 12,
p.
2712.
Bieler, Thomas R.
and
Telang, Adwait U.
2009.
Analysis of Slip Behavior in a Single Shear Lap Lead-Free Solder Joint During Simple Shear at 25°C and 0.1/s.
Journal of Electronic Materials,
Vol. 38,
Issue. 12,
p.
2694.
Kim, Suk Jun
Stach, Eric A.
and
Handwerker, Carol A.
2010.
Fabrication of conductive interconnects by Ag migration in Cu–Ag core-shell nanoparticles.
Applied Physics Letters,
Vol. 96,
Issue. 14,
Cuddalorepatta, Gayatri
Williams, Maureen
and
Dasgupta, Abhijit
2010.
Viscoplastic Creep Response and Microstructure of As-Fabricated Microscale Sn-3.0Ag-0.5Cu Solder Interconnects.
Journal of Electronic Materials,
Vol. 39,
Issue. 10,
p.
2292.
Bieler, T.R.
and
Lee, Tae-kyu
2010.
Encyclopedia of Materials: Science and Technology.
p.
1.
Arfaei, B.
Tashtoush, T.
Kim, N.
Wentlent, L.
Cotts, E.
and
Borgesen, P.
2011.
Dependence of SnAgCu solder joint properties on solder microstructure.
p.
125.
Blass, D.
Meilunas, M.
and
Borgesen, P.
2011.
On the Incorporation of Fine Pitch Lead Free CSPs in High Reliability SnPb Based Microelectronics Assemblies.
IEEE Transactions on Components, Packaging and Manufacturing Technology,
Vol. 1,
Issue. 1,
p.
92.
Borgesen, Peter
and
Meilunas, Michael
2011.
Effects of Solder Paste Volume and Reflow Profiles on the Thermal Cycling Performance of Mixed SnAgCu/SnPb Solder Joints.
IEEE Transactions on Components, Packaging and Manufacturing Technology,
Vol. 1,
Issue. 8,
p.
1205.
Yin, Liang
Wentlent, Luke
Yang, Linlin
Arfaei, Babak
Oasaimeh, Awni
and
Borgesen, Peter
2012.
Recrystallization and Precipitate Coarsening in Pb-Free Solder Joints During Thermomechanical Fatigue.
Journal of Electronic Materials,
Vol. 41,
Issue. 2,
p.
241.
Arfaei, B.
Wentlent, L.
Joshi, S.
Alazzam, A.
Tashtoush, T.
Halaweh, M.
Chivukula, S.
Yin, L.
Meilunas, M.
Cotts, E.
and
Borgesen, P.
2012.
Improving the thermomechanical behavior of lead free solder joints by controlling the microstructure.
p.
392.