Hostname: page-component-8448b6f56d-xtgtn Total loading time: 0 Render date: 2024-04-19T00:47:21.059Z Has data issue: false hasContentIssue false
  • English
  • Français

Evaluation of Microstructure Formation and Phase Equilibria for Thermoelectric β-FeSi2 Composite Alloys

Published online by Cambridge University Press:  30 January 2017

Yoshisato Kimura ,
Hiroaki Otani ,
Ayaka Mori  and
Yaw-Wang Chai
Yoshisato Kimura*
Affiliation:
Tokyo Institute of Technology, School of Materials and Chemical Technology, Department of Materials Science and Engineering, 4259 Nagatsuta, Midori-ku, Yokohama 226-8502, Japan. Tokyo Institute of Technology, Interdisciplinary Graduate School of Science and Engineering, Department of Materials Science and Engineering, 4259 Nagatsuta, Midori-ku, Yokohama 226-8502, Japan.
Hiroaki Otani
Affiliation:
Tokyo Institute of Technology, Interdisciplinary Graduate School of Science and Engineering, Department of Materials Science and Engineering, 4259 Nagatsuta, Midori-ku, Yokohama 226-8502, Japan.
Ayaka Mori
Affiliation:
Tokyo Institute of Technology, Interdisciplinary Graduate School of Science and Engineering, Department of Materials Science and Engineering, 4259 Nagatsuta, Midori-ku, Yokohama 226-8502, Japan.
Yaw-Wang Chai
Affiliation:
Tokyo Institute of Technology, School of Materials and Chemical Technology, Department of Materials Science and Engineering, 4259 Nagatsuta, Midori-ku, Yokohama 226-8502, Japan.
*
*(Email: kimura.y.ac@m.titech.ac.jp)
Get access

Abstract

Thermoelectric composite alloys consisting of the β-FeSi2 matrix and SiO2 particles dispersion were fabricated by a so-called combined reactions sintering process using reduction and oxidation reactions between eutectoid Si decomposed from α-Fe2Si5 and added Fe-oxide powder. Typical microstructure may include some of residual eutectoid Si particles, intermediate product Fe2SiO4 particles, and/or remaining reduced Fe particles depending on the composite alloy compositions and the process conditions. Partitioning of doping element, n-type Co or p-type Mn, during the process plays an important role to control the optimum carrier concentration of the composite alloys. Thermal conductivity can be reduced, as expected, by the dispersion of SiO2 particles. The solubility of doping elements, Co, Mn, Al, and Ru was evaluated in α-Fe2Si5 at 1373 K and in β-FeSi2 at 1073 K being based on the isotherm determination. It is suggested that suitable dopants for the present process are n-type Co and p-type Mn, since they have sufficiently large solubility around 10 at% in both α-Fe2Si5 and β-FeSi2 phases.

Keywords

thermoelectriccompositemicrostructure
Type
Articles
Information
MRS Advances , Volume 2 , Issue 26: Mechanical Behavior and Failure Mechanisms of Materials , 2017 , pp. 1369 - 1374
Copyright
Copyright © Materials Research Society 2017 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Nishida, I., Sakata, M., editor: Thermoelectric Engineering — fundamentals to applications — (in Japanese), Realize Inc., Tokyo, (2001), pp. 199–209.Google Scholar
Okamoto, H., ed.: Desk Handbook Phase Diagrams for Binary Alloys (2nd edition), ASM Intl., Materials Park OH, (2010) p. 389.Google Scholar
Ito, M., Tada, T., and Katsuyama, S., J. Alloy. Compd. 350, 296 (2003).Google Scholar
Ito, M., Tanaka, T., and Hara, S., J. Appl. Phys. 95, 6209 (2004).Google Scholar
Ito, M., Tada, T., and Hara, S., Mater. Trans. 45, 2916 (2004).Google Scholar
Kimura, Y., Takeno, K., Mori, A., and Chai, Y.W., J. Japan Inst. Met. Mater. 79, 613 (2015) (in Japanese).Google Scholar
Ueda, M.: Tokyo Inst. Tech., private communication based on T. Maruyama and M. Ueda, Taikabutsu, 58, 218 (2006) (in Japanese).Google Scholar