Hostname: page-component-848d4c4894-xfwgj Total loading time: 0 Render date: 2024-06-21T17:02:45.090Z Has data issue: false hasContentIssue false

Development of High Strength-High Conductivity Cu-6 wt% Ag Alloy for High Field Magnet

Published online by Cambridge University Press:  10 December 2015

Yoshikazu Sakai*
Affiliation:
The Institute for Solid State Physics, The University of Tokyo, Kashiwa, Chiba, Japan
Takaaki Hibaru
Affiliation:
National Institute for Materials Science, Tsukuba, Ibaraki, Japan
Kiyoshi Miura
Affiliation:
Showa Cable Systems Co., Ltd., Sagamihara, Kanagawa, Japan
Akira Matsuo
Affiliation:
The Institute for Solid State Physics, The University of Tokyo, Kashiwa, Chiba, Japan
Koushi Kawaguchi
Affiliation:
The Institute for Solid State Physics, The University of Tokyo, Kashiwa, Chiba, Japan
Koichi Kindo
Affiliation:
The Institute for Solid State Physics, The University of Tokyo, Kashiwa, Chiba, Japan
Get access

Abstract

One of the authors developed the high strength and high conductivity Cu-24 wt% Ag alloy as a conductor material for high field magnets twenty years ago.Wire and sheet of the alloy have been used as a conductor material for pulsed magnets or resistive magnets of the high magnetic field facilities of each country. However, the alloy required large quantities of Ag addition to achieve high strength. The cost performance and workability of the alloy were not good for that. So, we investigated possibility of low Cu-Ag alloy for decreasing in material cost and improving in workability. We succeeded in the development of the Cu-6 wt% Ag alloy by the new heat treatment which is superior to the characteristic of the Cu-24 wt% Ag alloy even if the amount of Ag content is decreased in 1/4.

At present, we make a lot of high field pulsed magnets by using the Cu-6 wt% Ag wire manufactured industrially, and do that magnetic field experiment and are getting good results at the ISSP, the university of Tokyo. We will talk about the characteristic, new heat treatment method and the manufacturing process of the conductor material for the Cu-6 wt% Ag alloy.

Type
Articles
Copyright
Copyright © Materials Research Society 2015 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Bevek, J., Harbison, J. P. and Bell, J.L., J Appl. Phys. 49, 6043 (1978).Google Scholar
Spitzig, A., Pelton, A.R. and Laabs, F. C., Acta Metall. 35, 2427 (1987).Google Scholar
Verhoeven, J.D., Schmidt, F. A., Gibson, E.D. and Spitzig, W.A., Journal of Metals,38 (1986).Google Scholar
Pantsyrnyi, V., Shikov, A., Nikulin, A., Vorobieva, A., Silaev, A., Beljakov, N., Potapenko, I. and Kozlenkova, N., “ High Magnetic Field “, ed Schneider-Muntau, H. J., (World Scientific, 1997) 465.Google Scholar
Benghahalem, A. and Morris, D. G., Acta mater, 45, 397(1997).Google Scholar
Sakai, Y., Inoue, K., Asano, T., Wada, H. and Maeda, H., Appl. Phys. Lett., 59, 2965(1991).Google Scholar
Massalsky, T. B., “ Binary Alloy Phase Diagrams”, 2nd edn, Vol. 1, 28. ASM international (1990).Google Scholar
Sakai, Y., Inoue, K. and Maeda, H., Acta. Metall, Mater., 43, 1517 (1995).CrossRefGoogle Scholar
Sakai, Y. and Schneider-Muntau, H. J.. Acta Materialia, 45, 1017 (1997).Google Scholar
Sakai, Y., Inoue, K., Asano, T. and Maeda, H., J. Japan, Inst. Metals 55, 1382(1991).CrossRefGoogle Scholar
Geisler, A.H., “Phase Transformations in Solids”, (John Wiley & Sons), 432 (1951).Google Scholar
Koda, S., “Goukin no Sekisyutu”, (Maruzen), 223 (1972).Google Scholar
Kainuma, T. and Watanabe, J.Japan. Inst. Metals 33, 198 (1969).CrossRefGoogle Scholar