Hostname: page-component-5c6d5d7d68-7tdvq Total loading time: 0 Render date: 2024-08-20T14:59:05.413Z Has data issue: false hasContentIssue false
  • English
  • Français

FIB Lift-Out and Milling of Cylindrical Specimens for Electron Tomography (or Atom Probe Field Ion Microscopy)

Published online by Cambridge University Press:  14 March 2018

Lucille A. Giannuzzi
Lucille A. Giannuzzi*
Affiliation:
FEI Company
*
LGiannuzzi@FEICO.com

Extract

Core share and HTML view are not available for this content. However, as you have access to this content, a full PDF is available via the ‘Save PDF’ action button.

Electron tomography using transmission electron microscopy (TEM) and related techniques (e.g., scanning transmission electron microscopy (STEM) or energy filtered TEM (EFTEM)) allow for 3-D microstructural and elemental mapping of specimens, and has been used successfully in the biological sciences where mass-thickness contrast dominates these mostly amorphous materials. Z-contrast STEM imaging via high angle annular dark field (HAADF) tomography has also been used successfully in the physical sciences. STEM, EFTEM, and holography tomography are more useful techniques for crystalline materials, since diffraction contrast in conventional TEM images can hinder image reconstruction. Typical tomography routines utilize conventional electron transparent foils, whereby the dimensions of the specimen perpendicular to the electron beam may be orders of magnitude greater than the specimen thickness parallel to the electron beam. Using this conventional specimen geometry, the effective specimen thickness increases as the specimen is tilted through the ± 70 degrees necessary for the tomographic acquisition process.

Type
Research Article
Information
Microscopy Today , Volume 12 , Issue 6 , November 2004 , pp. 34 - 35
Copyright
Copyright © Microscopy Society of America 2004

References

[1] Ziese, et al., J. Struct. Biol. 138, (2002), 58.CrossRefGoogle Scholar
[2] Giannuzzi, et al., in Analysis Techniques of Submicron Defects, 2002 Supplement to the EDFAS Failure Analysis Desktop Reference, ASM Int., Materials Park, Ohio (2002), 29–35.Google Scholar
[3] Martens, et al., Microscopy and Microanalysis, 6, suppl. 2, (2000), 522.Google Scholar
[4] Schwarz, and Giannuzzi, , Micros. Microanal, 10(suppl 2) (2004) 142.Google Scholar
[5] Yaguchi, et al., Micros. Microanal, 10(suppl 2) (2004) 1164.Google Scholar
[6] Yaguchi, et al., Micros. Microanal. 10(suppl 2) (2004) 1030.CrossRefGoogle Scholar