Hostname: page-component-5c6d5d7d68-pkt8n Total loading time: 0 Render date: 2024-08-18T14:28:42.589Z Has data issue: false hasContentIssue false

Transmission Electron Microscopy Study of Tin Oxide Thin Films Deposited on the Sapphire Substrate

Published online by Cambridge University Press:  02 July 2020

J. E. Dominguez
Affiliation:
Dept. of Materials Science and Engineering, The University of Michigan, Ann Arbor, MI, 48109
L. Fu
Affiliation:
Dept. of Materials Science and Engineering, The University of Michigan, Ann Arbor, MI, 48109
X. Q. Pan
Affiliation:
Dept. of Materials Science and Engineering, The University of Michigan, Ann Arbor, MI, 48109
Get access

Extract

Thin films of tin oxide (SnO2) with the rutile structure are the subject of many investigations due to their potential applications, such as gas sensing devices, lithium batteries cathodes and solar cells. There is a growing interest in the development of gas sensors using SnO2 thin films due to their high surface to volume ratio. Previous studies have shown that the gas sensing properties of SnO2 are very dependent on the microstructure and that doping elements can greatly influence their electrical properties. In this paper we present transmission electron microscopy (TEM) studies of the microstructure and crystal defects of SnO2 thin films.

Tin oxide films 5 nm in thickness were deposited on the surface of sapphire (A12O3) by pulsed laser ablation of ceramic SnO2 targets. The film microstructure was studied using X ray diffraction, atomic force microscopy and transmission electron microscopy. Defects were studied using high resolution transmission electron microscopy (HRTEM).

Type
Films and Coatings
Copyright
Copyright © Microscopy Society of America

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Shimizu, Y. and Egashira, M., MRS Bulletin, 24 (1999) 18.CrossRefGoogle Scholar
Xu, C. et.al., Sensors and Actuators B, 3 (1991) 147.CrossRefGoogle Scholar
Zheng, J.G. et.al., Journal of Materials Science, 31 (1996) 2317.CrossRefGoogle Scholar