Hostname: page-component-7479d7b7d-c9gpj Total loading time: 0 Render date: 2024-07-11T13:28:53.834Z Has data issue: false hasContentIssue false

Recent developments and applications of TMCP steel plates*

Published online by Cambridge University Press:  19 December 2011

V. Schwinn
Affiliation:
Aktien – Gesellschaft der Dillinger Hüttenwerke, Werkstraße 1, 66763 Dillingen, Germany. e-mail: Volker.Schwinn@dillinger.biz; Juergen.Bauer@dillinger.biz; Peter.Fluess@dillinger.biz; Juergen.Kirsch@dillinger.biz
J. Bauer
Affiliation:
Aktien – Gesellschaft der Dillinger Hüttenwerke, Werkstraße 1, 66763 Dillingen, Germany. e-mail: Volker.Schwinn@dillinger.biz; Juergen.Bauer@dillinger.biz; Peter.Fluess@dillinger.biz; Juergen.Kirsch@dillinger.biz
P. Flüss
Affiliation:
Aktien – Gesellschaft der Dillinger Hüttenwerke, Werkstraße 1, 66763 Dillingen, Germany. e-mail: Volker.Schwinn@dillinger.biz; Juergen.Bauer@dillinger.biz; Peter.Fluess@dillinger.biz; Juergen.Kirsch@dillinger.biz
H.-J. Kirsch
Affiliation:
Aktien – Gesellschaft der Dillinger Hüttenwerke, Werkstraße 1, 66763 Dillingen, Germany. e-mail: Volker.Schwinn@dillinger.biz; Juergen.Bauer@dillinger.biz; Peter.Fluess@dillinger.biz; Juergen.Kirsch@dillinger.biz
E. Amoris
Affiliation:
GTS Industries, rue du Comte Jean, 59379 Dunkerque Cedex 1, France; e-mail: Eric.Amoris@dillinger.biz
Get access

Abstract

The developments of plates are strongly driven by demands from high-sophisticated pipeline and structural applications. Such needs reflect in plates with higher thickness, larger width, higher toughness also at lower temperatures, higher strength and/or better resistance to sour environments. The requirement profiles are, in some cases, exceptional and have become achievable, in an extreme combination of alloying and processing technologies, only as a result of comprehensive development work and plant investments. A broad potential for innovation derives by the utilization of the key-technology TMCP (Thermo-Mechanical Controlled Process). The status of present-day heavy plate production will be presented. An outline of the production facilities, routes and process variants will be given. As a central element to achieve high-class requirements, aspects and parameters of the metallurgical design will be explained. The utilization will be explained and illustrated with selected recent applications.

Type
Research Article
Copyright
© EDP Sciences, 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

EWEA, Wind in power, 2009 European statistics, Febr. 2010
EUROSTAT, Statistical Pocket Book, 2009
Bannenberg, N., Bruckhaus, R., Lachmund, H., Schmitt, F.-J., Stahl und Eisen 118 (1998) 33
Bannenberg, N., Streißelberger, A., Schwinn, V., Steel Res. Int. 78 (2007) 185
Harste, K., Klingbeil, J., Schwinn, V., Bannenberg, N., Bergmann, B., Stahl und Eisen 120 (2000) 53
Kirsch, H.J., Fluess, P., Schuetz, W., Streisselberger, A., Stahl und Eisen 119 (1999) 57
S. Zajac, V. Schwinn, K.-H. Tacke, Characterisation and quantification of complex bainitic microstructures in high and ultra-high strength linepipe steels, International Symposium on microalloying for new steel processes and applications, September 7-9, 2005, San Sebastian, Spain
I.Yu. Pyshmintsev, T.P. Lobanova, A.B. Arabey, P.M. Sozonov, A.O. Struin, Crack arrestability and mechanical properties of 1420 mm X80 Grade pipes designed for 11.8 MPa operation pressure, Pipeline Technology Conference, October 12-14, 2009, Ostend, Belgium
M. Qiurong, H. Chunyong, Comparison and analysis on specification of X80 line pipe for 2nd West-East Gas Transmission Pipeline Project, Proceedings of the 8th International Pipeline Conference IPC2010, September 27-October 1, 2010, Calgary, Alberta, Canada
F. Hanus, J. Schuetz, W. Schuetz, One step further – 500 MPa Yield Strength Steel for Offshore Constructions, Proc. 21st Int. Conf. on Offshore Mechanics and Arctic Engineering, June 23-28, 2002, Oslo, Norway
W. Schuetz, F. Hanus, New steels for arctic regions (Sakhalin II), Dillinger Offshore Letter, Vol. 1, 2005
V. Schwinn, A. Thieme, TMCP Steel Plates for Sour Service Linepipe Application, Pipe Seminar, March 15-16, 2006, Moscow, Russia