Hostname: page-component-76fb5796d-x4r87 Total loading time: 0 Render date: 2024-04-25T17:31:07.428Z Has data issue: false hasContentIssue false
  • English
  • Français

Soft X-ray laser pointing and focusing experiments†

Published online by Cambridge University Press:  09 March 2009

D. G. Nilson ,
S. B. Brown ,
C. J. Keane ,
B. J. Macgowan ,
D. L. Matthews ,
J. E. Trebes ,
O. R. Wood II  and
W. T. Silfvast
D. G. Nilson
Affiliation:
Lawrence Livermore National Laboratory, University of California, Livermore, CA 94550
S. B. Brown
Affiliation:
Lawrence Livermore National Laboratory, University of California, Livermore, CA 94550
C. J. Keane
Affiliation:
Lawrence Livermore National Laboratory, University of California, Livermore, CA 94550
B. J. Macgowan
Affiliation:
Lawrence Livermore National Laboratory, University of California, Livermore, CA 94550
D. L. Matthews
Affiliation:
Lawrence Livermore National Laboratory, University of California, Livermore, CA 94550
J. E. Trebes
Affiliation:
Lawrence Livermore National Laboratory, University of California, Livermore, CA 94550
O. R. Wood II
Affiliation:
AT&T Bell Laboratories, Holmdel, NJ 07733
W. T. Silfvast
Affiliation:
AT&T Bell Laboratories, Holmdel, NJ 07733
Get access Rights & Permissions [Opens in a new window]

Abstract

Recent advances in X-ray laser research have significantly increased the possibilities for X-ray laser applications. In this paper, we report the first demonstration of pointing and focusing of a soft X-ray laser beam. A LLNL selenium soft X-ray laser at 206 and 209 Å was used in these experiments. Two state of the art 76 mm diameter multilayer mirrors were used to collimate and refocus the laser onto a set of cross hairs which were constructed from 100 μm diameter wires. The cross hairs were located 4.6 m from the X-ray laser source. Results show that the laser can be pointed to within 75 μrad and focused to a 235 μm diameter spot. It is expected that eventually spot sizes near 100 μm and flux levels of 100J/cm2 at X-ray irradiances up to 1012W/cm2 can be provided to a remote application, using a similar beam relaying system.

Type
Research Article
Information
Laser and Particle Beams , Volume 6 , Issue 4 , November 1988 , pp. 751 - 756
Copyright
Copyright © Cambridge University Press 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Canfield, R. 1988 National Bureau of Standards, Postcalibration of Al filters.Google Scholar
Ceglio, N. M. et al. 1986 Journal de Physique C6, 277.Google Scholar
MacGowan, B. J. et al. 1986 SPIE Proceedings 36, 688.Google Scholar
Matthews, D. L. et al. 1985 Phys. Rev. Lett. 54, 110.CrossRefGoogle Scholar
Phillion, D. W. 1987 Private Comm., LLNL.Google Scholar
Simon, A. et al. 1986 Absolute Calibration of the Nova X-Ray Laser Beam Divergence Camera, APS, Baltimore, Maryland.Google Scholar
Stearns, D. 1987 Private Comm.Google Scholar
Trebes, J. E. 1986 International Colloquium on X-Ray Lasers, Aussois, France, Lawrence Livermore National Laboratory Report No. UCRL-95396 (1986).Google Scholar
Underwood, J. 1987 bookPrivate Comm., Coatings and Postcalibration, University of California at Berkeley.Google Scholar
Whelan, D. A. et al. 1987 SPIE Proceedings 831 (1987) 275.CrossRefGoogle Scholar
Wood, O. R. II. et al. 1986 SPIE Proceedings 36, 50.Google Scholar