Hostname: page-component-848d4c4894-2xdlg Total loading time: 0 Render date: 2024-07-07T05:48:24.480Z Has data issue: false hasContentIssue false

Rayleigh-Taylor instability study for heavy-ion beam driven, high-gain ICF implosions

Published online by Cambridge University Press:  09 March 2009

A. Caruso
Affiliation:
Associazione EURATOM-ENEA sulla Fusione, Centro Ricerche Energia Frascati, C.P. 65–00044 Frascati, Rome, Italy
V. A. Pais
Affiliation:
Associazione EURATOM-ENEA sulla Fusione, Centro Ricerche Energia Frascati, C.P. 65–00044 Frascati, Rome, Italy
A. Parodi
Affiliation:
Associazione EURATOM-ENEA sulla Fusione, Centro Ricerche Energia Frascati, C.P. 65–00044 Frascati, Rome, Italy

Abstract

We carried out a numerical analysis on the stability of targets designed to produce fusion energy gains close to 100 when irradiated with an appropriate heavy ion beam. To reach such performances, we found that a high-Z radiation shield was necessary to screen the DT fuel from the radiation coming from the surrounding hot material. As opacity of high-Z materials is only weakly density dependent, we considered targets with lead shields both at solid density and with a density equivalent to that of the contiguous external material. The behaviour of both kinds of targets has been studied by introducing a small spatial nonuniformity on the external surface of the lead shield. Targets with low-density shields have been tested with a beam intensity perturbation, too. Because density gradients are very sharp and ablation is practically absent, we have found these implosions to be Rayleigh-Taylor unstable. The evolution has been followed in the nonlinear regime because the full hydrodynamical-radiative model with a nonlinear heavy ion energy deposition and mesh correction was used.

Type
Research Article
Copyright
Copyright © Cambridge University Press 1992

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Bangerter, R.O. et al. 1982 Phys. Lett. 88a, 225.CrossRefGoogle Scholar
Brueckner, K.A. et al. 1982 Phys. Rev. B, 25, 4377.Google Scholar
Caruso, A. & Pais, V.A. 1991 Internal Report RT/FUS/90/5, (ENEA, Frascati, Italy) II Nuovo Cimento 13D, 969.Google Scholar
Mehlhorn, T.A.J. 1981 Appl. Phys. 52, 6522.CrossRefGoogle Scholar
Pais, V.A. & Caruso, A. 1990 Comp. Phys. Comm. 58, 55.CrossRefGoogle Scholar
Velarde, G. et al. 1986 Laser Particle Beams 4, 349.CrossRefGoogle Scholar
Yamaki, T. 1985 Laser Particle Beams 3, 29.Google Scholar