Hostname: page-component-7c8c6479df-24hb2 Total loading time: 0 Render date: 2024-03-19T04:07:00.178Z Has data issue: false hasContentIssue false

Processing and morphology of permeable polycrystalline silicon thin films

Published online by Cambridge University Press:  31 January 2011

G. G. Dougherty
Affiliation:
Department of Materials Science and Engineering, University of California, Berkeley, California, 94720
A. A. Pisano
Affiliation:
Department of Mechanical Engineering, University of California, Berkeley, California, 94720
T. Sands
Affiliation:
Department of Materials Science and Engineering, University of California, Berkeley, California, 94720
Get access

Abstract

It is known that thin films of polycrystalline silicon, deposited under the right conditions, can be permeable to HF-based etching solutions. While these films offer unique capabilities for microfabrication, both the poor reproducibility of the permeable film properties and the lack of a detailed physical understanding of the material have limited their application. This work provides a methodical study of the relationship between process, microstructure, and properties of permeable polycrystalline silicon thin films. It is shown that the permeability is a result of small pores, on the order of 10 nm, between the 100–200-nm hemispherical grains characteristic of the permeable film morphology. This morphology occurs only in nearly stress-free films grown in a narrow temperature range corresponding to the transition between tensile and compressive film growth regimes. This result strongly suggests that the monitoring of residual film stress can provide the process control needed to reliably produce permeable films. A simple kinetic model is proposed to explain the evolution of the morphology of the permeable films.

Type
Articles
Copyright
Copyright © Materials Research Society 2002

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1.Sugiyama, S., Suzuki, T., Kawahata, K., Shimaoka, K., Takigawa, M., and Igarashi, I., in Proceedings of the IEEE International Electron Devices Meeting, Los Angeles, CA, Dec. 7–10 1986 (Piscataway, NJ, 1986), pp. 184187.Google Scholar
2.Mastrangelo, C.H. and Muller, R.S., in Proceedings of the IEEE International Electron Devices Meeting, San Francisco, CA, Dec. 3–6 1989 (IEEE, Piscataway, NJ, 1989), pp. 503506.Google Scholar
3.Lin, L., McNair, K.M., Howe, R.T., and Pisano, A.P., in Proceedings of the 7th International Conf. on Solid-State Sensors and Actuators (Transducers ’93), Yokohama, Japan, June 7–10 1993 (IEEE, Piscataway, NJ, 1993), pp. 270273.Google Scholar
4.Judy, M.W. and Howe, R.T., in Proceedings of the IEEE Micro Electro Mechanical Systems Workshop, Ft. Lauderdale, FL, 1–10 Feb. 1993 (IEEE, Piscataway, NJ, 1993), pp. 265271.CrossRefGoogle Scholar
5.Libouitz, K.S., Howe, R.T., and Pisano, A.P., in Proceedings of the 8th International Conference on Solid-State Sensors and Actuators (Transducers ’95), Stockholm, Sweden, 25–29 June 1995 (IEEE, Piscataway, NJ, 1995), Vol. 1, pp. 224–227.Google Scholar
6.Lebouitz, K.S., Mazaheri, A., Howe, R.T., and Pisano, A.P., in Proceedings of the 12th International IEEE Conference on Micro Electro Mechanical Systems (MEMS ’99), Orlando, FL (IEEE, Piscataway, NJ, 1999), pp. 470475.Google Scholar
7.Kageyama, Y., Tsuchiya, T., Funabashi, H., and Sakata, J., in Proceedings of the 10th International Conference on Solid-State Sensors and Actuators (Transducers ’99) (IEEE, Piscataway, NJ, 1999), pp 340–343.Google Scholar
8.Chonko, M., Vandenberg, D., and Keitz, D., in The Physics and Chemistry of SiO2 and the Si-SiO2 Interface 2, edited by Helms, C.R. and Deal, B.E. (Plenum, New York, 1993), pp. 357362.CrossRefGoogle Scholar
9.Hedge, R.I., Chonko, M.A., and Tobin, P.J., in Amorphous Silicon Technology, edited by Schiff, E.A., Thompson, M.J., Maclan, A., Tanaka, K., and LeComber, P.G. (Mater. Res. Soc. Symp. Proc. 297, Pittsburgh, PA, 1993), pp. 10371042.Google Scholar
10.Monk, D.J., Krulevitch, P., Howe, R.T., and Johnson, G.C., in Thin Films: Stresses and Mechanical Properties, edited by Townsend, P.H., Weiks, J.P., Sonchez, J.E. Sr., and Borgesen, P. (Mater. Res. Soc. Symp. Proc. 308, Pittsburgh, PA, 1993), pp. 641646.Google Scholar
11.Zahn, J., Trebotich, D., and Liepmann, D., in Proceedings of the First Annual IEEE-EMBS Conference on Microtech. In Med. and Biology, Oct 12–14, 2000, Lyon, France (IEEE, Piscataway, NJ, 2000), pp. 375380.Google Scholar
12.Mathews, V.K., in Phase Transformation Kinetics in Thin Films, edited by Chen, M., Thompson, M.O., Schwarz, R.B., and Libera, M. (Mater. Res. Soc. Symp. Proc. 230, Pittsburgh, PA, 1992), pp. 207212.Google Scholar
13.Watanabe, H., Aoto, N., Adachi, S., and Kikkawa, T., J. Appl. Phys. 71(7), 3538–3543 (1992).CrossRefGoogle Scholar
14.Watanabe, H., Sakai, A., Tatsumi, T., and Niino, T., Solid State Technol. 29–33 (1992).Google Scholar
15.Lee, E.G. and Rha, S.K., J. Mater. Sci. 28, 6279–6284 (1993).Google Scholar
16.Banerjee, A., Wise, R.L., Crenshaw, D.L., Khamankar, R.B., and Edwards, H., in Polycrystalline Thin Films—Structure, Texture, Properties and Applications, edited by Yalisoue, S.M., Adams, B.L., Im, J.S., Zhu, Y., and Chen, F-R. (Mater. Res. Soc. Symp. Proc. 472, Pittsburgh, PA, 1997), pp. 433438.Google Scholar
17.Krulevitch, P., Howe, R.T., Johnson, G.C., and Huang, J., in Proceedings of the International Conference on Solid-State Sensors and Actuators (Transducers ’91) (IEEE, Piscataway, NJ, 1991), pp. 949952.Google Scholar
18.Krulevitch, P., Nguyen, T.D., Johnson, G.C., Howe, R.T., Wenk, H.R., and Gronksy, R., in Evolution of Thin Film and Surface Microstructure, edited by Thompson, C.V., Tsao, J.Y., and Srolovitz, D.V. (Mater. Res. Soc. Symp. Proc. 202, Pittsburgh, PA, 1991), pp. 167172.Google Scholar
19.Krulevitch, P., Johnson, G.C., and Howe, R.T., in Smart Materials Fabrication and Materials for Micro-Electro-Mechanical Systems, edited by Jardine, A.P., Johnson, G.C., Crowson, A., and Allen, M. (Mater. Res. Soc. Symp. Proc. 276, Pittsburgh, PA, 1992), pp. 7984.Google Scholar
20.Yu, C-L., Flynn, P.A., Lee, S-H., and J.C. Bravman, Stress and Microstructural Evolution of LPCVD Polysilicon Thin Films During High Temperature Annealing, in Thin Films—Structure and Morphology, edited by Moss, S.C., Ila, D., Cammarata, R.C., Chason, E.H., Einstein, T.L., and Williams, E.D. (Mater. Res. Soc. Symp. Proc. 441, Pittsburgh, PA, 1992), pp. 403–8.Google Scholar
21.Olson, G.L. and Roth, J.A., Mater. Sci. Rep. 3(1), 1–78 (1988).CrossRefGoogle Scholar