Hostname: page-component-78c5997874-s2hrs Total loading time: 0 Render date: 2024-11-18T06:21:45.045Z Has data issue: false hasContentIssue false
  • English
  • Français

Cold-rolling of Ti-rich TiAl polysynthetically twinned crystals

Published online by Cambridge University Press:  31 January 2011

S. R. Nishitani ,
M. H. Oh ,
A. Nakamura ,
T. Fujiwara  and
M. Yamaguchi
S. R. Nishitani
Affiliation:
Department of Metal Science and Technology, Kyoto University, Kyoto 606, Japan, 075-753-5467
M. H. Oh
Affiliation:
Department of Metal Science and Technology, Kyoto University, Kyoto 606, Japan, 075-753-5467
A. Nakamura
Affiliation:
Department of Metal Science and Technology, Kyoto University, Kyoto 606, Japan, 075-753-5467
T. Fujiwara
Affiliation:
Department of Metal Science and Technology, Kyoto University, Kyoto 606, Japan, 075-753-5467
M. Yamaguchi
Affiliation:
Department of Metal Science and Technology, Kyoto University, Kyoto 606, Japan, 075-753-5467
Get access

Abstract

Polysynthetically twinned crystals of TiAl with a nearly stoichiometric composition have been grown and rolled at room temperature. The maximum total reduction in thickness which is attainable without fracture depends on lamellae orientation with respect to the rolling plane and rolling direction. When specimens are oriented such that shear deformation parallel to the lamellar planes is operative during rolling and its operation causes lengthening of specimens, such specimens can be rolled up to about 50% reduction in thickness. The (111) pole figures are determined for the surface of specimens rolled to several different amounts of reduction, and the formation of surface texture is briefly discussed.

Type
Articles
Information
Journal of Materials Research , Volume 5 , Issue 3 , March 1990 , pp. 484 - 487
Copyright
Copyright © Materials Research Society 1990

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

1Huang, S.C., Hall, E.L., and Gigliotti, M.F.X., Proc. of the MRS Symp. on High-Temperature Ordered Intermetallic Alloys II, edited by Stoloff, N.S., Koch, C.C., Liu, C.T., and Izumi, O. (Materials Research Society, Pittsburgh, PA, 1987), Vol. 81, p. 481.Google Scholar
2Hall, E. L. and Huang, S. C., J Mater. Res. 4, 595 (1989).CrossRefGoogle Scholar
3Fujiwara, T., Nakamura, A., Hosomi, M., Nishitani, S. R., Shirai, Y., and Yamaguchi, M., accepted for publication in Phil. Mag. in July 1989.Google Scholar
4Sastry, .M. L. and Lipsitt, H. A., Metall. Trans. A 8A, 299 (1977)CrossRefGoogle Scholar