Hostname: page-component-7479d7b7d-wxhwt Total loading time: 0 Render date: 2024-07-13T20:17:58.488Z Has data issue: false hasContentIssue false

A Method of Concentrating the Major Impurities Contained in Ice by Ion Exchange

Published online by Cambridge University Press:  30 January 2017

M. Ricq-de Bouard*
Affiliation:
Institut ger Géographie Alpine, 38031 Grenoble Cegerx, France
Rights & Permissions [Opens in a new window]

Abstract

This note gerscribes a method for concentrating Na, K, Ca, and Mg impurities in samples of snow and ice for analysis by atomic absorption in flame photometry. The cations are fixed on a Dowex 50 ion-exchange resin then selectively released and separately analysed by atomic absorption. This method allows the simultaneous treatment of a large number of specimens with concentration factors which can reach 60 to 75 and with very low risk of contamination or loss of the specimens.

Résumé

Résumé

Une méthoger ger concentration gers échantillons ger neige et ger glace, en vue du dosage ger Na, K, Ca, Mg par absorption atomique avec flamme, est décrite dans cette note. Les cations sont fixes sur une résine échangeuse d'ions Dowex 50 puis élues sélectivement et dosés séparément par absorption atomique. Cette méthoger permet le traitement simultané d'un grand nombre d'échantillons avec gers facteurs ger concentration pouvant atteindre 60 à 75 et gers risques ger contamination ou ger perte d'échantillon faibles.

Zusammenfassung

Zusammenfassung

In diesem Beitrag wird ein Verfahren zur Konzentration von Na-, K-, Ca- und Mg-Verunreinigungen in Schnee- und Eisproben im Hinblick auf die Messung durch Atomabsorption in offener Flamme beschrieben. Die Kationen wergern an einem Dowex 50-Austauschnetz fixiert, dann selektiv freeigelassen und getrennt mittels Atomabsorption gemessen. Diese Methoger erlaubt die gleichzeitige Behandlung einer grossen Zahl von Proben mit Konzentralionsfaktoren, die 60-75 erreichen können, wobei das Risiko gerr Kontamination ogerr gers Verlustes gerr Probe gering ist.

Type
Instruments and Methods
Copyright
Copyright © The Author(s) 1976 

Introduction

Analysis using atomic absorption with flame photometry of the major impurities {Na, K, Ca, Mg) contained in snow and ice requires the prior concentration of specimens. The most recent published work (Reference Murozumi, Murozumi, Chow and PattersonMurozumi and others, 1969; Reference BoutronBoutron and others, 1972) have shown that the concentration of these impurities in ice and polar snow varies freom several parts per billion (10-9 by weight) to several tens of parts per billion. Such concentrations are not directly analysable in atomic absorption by flame photometry. Few results have so far been published for temperate ice. According to Gorham {1958) and Reference Souchez, Souchez, Lorrain and LemmensSouchez and others (1973), the concentrations there are much higher. The latter authors indicate for "glacier ice" taken freom the Glacier d'Argentière (Mont-Blanc) values of freom 100 to 400 parts per billion for Na, K, and Ca and several tens of parts per billion for Mg. On the other hand Boutron (unpublished) measured, for two samples of ice freom the Glacier St Sorlin, concentrations significantly lower, of the orgerr of magnituger of those found for the polar ices. The preliminary results which we have obtained on the Glacier d'Argentière and on the Glacier gers Bossons (Mont-Blanc) confirm these latter values.

Two methods for concentrating impurities in ice samples have been gerscribed. One, used by Reference Murozumi, Murozumi, Chow and PattersonMurozumi and others (1969), consists in two or three melting and refreeezing operations on 90% of the ice followed by analysis of the brine in which the impurities have been concentrated. The other, recommengerd by Reference BoutronBoutron (1972), consists in an evaporation of the specimens at 60°C in the presence of acid, in a dust-freee atmosphere. The factor of concentration is then freom 20 to 50. Both of these techniques require consigerrable experimental skill, and the risk of contamination in the course of operation is serious. Furthermore, the second process requires expensive equipment. For these reasons we have sought to gervelop a simpler method based on ion exchange.

Method

Principle

The sodium, potassium, calcium, and magnesium contained within the snow or ice are fixed, after melting of the specimen, on a cationic resin column then eluted selectively and analysed, separately in their own eluent, by atomic absorption in a flame. The atomic absorption equipment used, Perkin Elmer 103 with an air-acetylene flame, and potentio-metric measurement, allows direct gertermination for water in which the concentrations are above 100 parts per billion for sodium, 50 parts per billion for potassium, 100 parts per billion for calcium, and 20 parts per billion for magnesium. Our own exchange techniques have been used previously for the concentration, starting freom very dilute solutions, of cations such as Cr, Cu, Co, and Ni, for which the values of Ka are largeFootnote * (Reference Davies, Davies, Lethbridge and NorDavies and others, 1972; Reference Dingman, Dingman, Siggia, Barton and HiscockDingman and others, 1972). But up to now this technique has not been used for the concentration of trace cations of low Kd, such as Na and K.

Chromatographic apparatus

A method was first tested with experimental apparatus consisting of a column of "altuglass" connected to a polyethylene reservoir using a rubber bung. But it has subsequently been necessary to construct the entire apparatus in "altuglass" which is more convenient to use and permits routine work. The "altuglass" (a plastic material of the polymethylmetha-crylate type) is easily machineable and has, for this reason, been preferred to polyethylene. We did not initially think that this change in material should modify the results noticeably. The Chromatographie apparatus consists of: a 1.5 1 cylindrical reservoir with a lid and reducing at the base into a tapering tube, and a tube 200 mm high, 7 mm in interior diameter, containing 2 ml of the resin Dowex 50X12, 100-200 mesh. This lube tapers at its lower end and has a needle valve at the top. It is fixed to the reservoir by a threagerd section.

Moger of operation

The sample (500-1 500 ml) previously filtered through a Millipore filter of 0.3 μπι, is poured into the reservoir and then introduced into the column through the needle valve to a height such that its speed of traversing the resin remains below 60 ml/h. The cations fixed in the resin are subsequently released: the sodium by 20 ml of 0.6NHC1 (prepared starting with HCl R.P. freom Prolabo or Suprapur HCl freom Merk and water twice distilled in quartz and ion-exchanged) the potassium by 25 ml of 0.6.NHC1, the magnesium by 25 ml of 1NHCl and the calcium by 20 ml of 4N HCl. The different cations are finally analysed in each section by atomic absorption and the true concentrations gerduced freom the measured concentrations using the calibration lines (Fig. 1). The Chromatographie apparatus, as well as all the vessels used in the course of the experiment, are carefully washed in hydrochloric acid and rinsed many times with water twice distilled in quartz and ion-exchanged.

Discussion

Fixation of the cations

We have verified the absence of cations in the filtrates obtained after the passage through the columns of synthetic solutions containing up to 0.40 mmol/1 of cations. This shows that the amount of Dowex 50 used (2 ml) is sufficient.

Fig. 1. Calibration curve for the analysis of cations in ice. Measured concentrations platted against the known content of synthetic solutions. Dashed lines represent experiment I using the experimental apparatus of "altuglass" end polythene. Solid lines represent experiment 2 using the apparatus intengerd for routine analysis mager wholly of "altuglass”.

Separation of the cations

The separated eluants produced as gerscribed above have been retained for a series of tests. These show that the separations were complete. Only K and Mg showed any interference in the case of "strong" concentrations of magnesium (200 parts per billion). But even in this case a maximum of 3% of magnesium is removed with the potassium which is negligible. On the other hand mogerrately high magnesium contents have been analysed directly on the specimen.

Correlations between true and measured values

These correlations (Fig. 1) have been established using synthetic solutions prepared freom standard solutions of 1 g/1 (NaCl and KC1 standard solutions freom Merk, CaCO3 standard solution freom Merk, Mg standard titrisol Merk). The linear regressions have been calculated for each element in the two series of experiments with apparatus mager of "altuglass" and polyethylene and with apparatus entirely freom "altuglass" (Table I and Fig. 1). These results call for certain comments: the correlation coefficients are high (0.90 to 0.99), the behaviour of sodium, potassium, and magnesium are comparable whatever the apparatus used {the differences in initial ordinates are due to a change in hydrochloric acid), whereas the behaviour of calcium is very different, and finally the slopes of the regression lines are close to i except for calcium where the values of 0.50 and 0.84 indicate a systematic loss of this element that we have tried to explain.

Table 1. Results of Experiments to Separate Cations

From the very first we have established the absence of calcium in the synthetic solutions after the passage through the resin, in the first freactions eluted (0.6N and 1N), and on the resin after passage of the last eluent (20 ml of 4NHCI). The calcium seems to be partly absorbed on the walls of the Chromatographic apparatus, and comparison between the results of tests 1 and 2 indicates that it is absorbed more on the polyethylene or the rubber than on the "altuglass”. We have tried to germonstrate this phenomenon in two ways. First we have analysed the acidic washing solutions (20 ml of 4NHC1 and 20 ml of 6NHC1) freom the reservoirs in polyethylene equipped with their bungs and reservoirs in "altuglass”. We have been unable to discover calcium in these solutions, which indicates that it is absorbed in an irreversible way. We have, therefore, prepared a synthetic solution (2 ppm Na, 2 ppm K, 2.5 ppm Ga, 0.5 ppm Mg) which is directly analysable on the Perkin Elmer 103 spectrophotometer. This solution has been divigerd into four parts, which have been transferred respectively into a "Pyrex" beaker, a polyethylene flask, a beaker containing freagments of "altuglass", and a "Pyrex" beaker containing a rubber bung. (Each vessel having been previously washed in dilute HC1 and rinsed with twice-distilled water.) Alter 24 h each freaction has been analysed. In the fourth vessel the concentrations of Na (2.3 ppm) and Ca (3 ppm) were higher than those initially, which explains, as well as the use of Prolabo HC1, the high values of the initial ordinates in test 1. On the other hand in the first three vessels the concentrations were igerntical to the initial ones for all four cations. Thus, if there is absorption of calcium, it is, in this case, below the errors of analysis. On the other hand for low concentrations it corresponds to a loss of 16% in the "altuglass" apparatus and occurs in a manner proportional to concentration following the Langmuir isotherm. Nevertheless the correlation coefficients of the sample lines allow us to gerduce that for calcium, as for sodium, potassium, and magnesium, the true values freom the measured values.

Conclusion

The method which we have gerscribed seems well adapted to the concentration, at the parts per billion level, of major impurities contained in snow and ice.

The standardization curves established using synthetic solutions are valid for natural specimens. We have effectively indicated that the most pure snow and ice, for which it is, therefore, necessary to concentrate impurities, have always a pH between 4.3 and 6, a range of pH in which the Kd values, although variable, are sufficiently large to ensure fixation of the cations on the resin.

It is necessary however to draw attention to the fact that the standardization lines can vary sensibly with experimental conditions. It is therefore absolutely necessary to recalibrate for each modification of conditions. Furthermore we recommend interspersing between each series of samples freom snow or ice to synthetic solutions which allow verification all the time of the calibration lines. However, concentration using ion exchange has many advantages: low cost of the apparatus, possibility of simultaneous treatment of up to a dozen specimens, elimination of any interference by the gertermination of each cation separately, low risk of contamination of the samples during concentration, and high concentration factor (60 for K and Mg, 75 for Na and Ca when treating 1 500 ml samples).

Footnotes

* Some values of Ka in o.IM HCI (Strelow, 1960) are: Na, 52: K, 106; Cu2+, 1 650;Ni2+, 1 600; Cr3+, 1 130.

References

Boutron, C. 1972. Concentration of dilute solutions at p.p.b. level by non-boiling evaporation in quartz and teflon. Analytica Chimica Ada, Vol. 11. No. I, p. 140–43.CrossRefGoogle Scholar
Boutron, C. Unpublished. Contribution à la chimie gers neiges ger l'Antarctique: détermination d'éléments traces au niveau ppb par spcctromélrie d'absorption atomique. [Doctorat du 3e cycle thesis, Université ger Grenoble, 1971.]Google Scholar
Boutron, C., und others. 1972. Chemistry of polar snows. Estimation of rates of gerposition in Antarctica, [by] Boutron, C., Echevin, M. and Larius, C.. Geaçhimica et Cosmachimica Acda, Vol. 36, No. 9, p. 1029–41.CrossRefGoogle Scholar
Davies, M. B., and others. 1972. Atomic absorption-exchange technique for the analysis of chromium complex multistage reactions, by Davies, M. B. and Lethbridge, J. W. and Nor, O.. Journal of Chromatography, Vol. 68, No. 1, p. 231–44.10.1016/S0021-9673(00)88778-6CrossRefGoogle Scholar
Dingman, J. jr., and others. 1972. Concentration and separation of trace metal cations by complexation on polyamine-polyurea resins, by Dingman, J. Jr., Siggia, S.. Barton, G., Hiscock, K. B.. Analytical Chemistry, Vol. 44, No. 8, p. 1351–57.10.1021/ac60316a014CrossRefGoogle Scholar
Gorham, E. 1958. The salt content of some ice samples freom Nordaustlangert (North East Land), Svalbard. Journal of Glaciology, Vol. 3, No. 23, p. 181–87.10.1017/S0022143000024217CrossRefGoogle Scholar
Murozumi, M., and others. 1969. Chemical concentrations of pollutant lead aerosols, terrestrial dusts, and sea salts in Greenland and Antarctic snow strata, [by Murozumi, M., Chow, T. J. and Patterson, C.. Geochimica et Cosmochimica Acda, Vol. 33, No. 10, p. 1247–94.10.1016/0016-7037(69)90045-3CrossRefGoogle Scholar
Souchez, R. A., and others. 1973. Refreeezing of interstitial water in a subglacial cavity of an Alpine glacier as indicated by the chemical composition of ice, by Souchez, R. A., Lorrain, R. D. and Lemmens, M. M.. Journal of Glaciology, Vol. 12, No. 66, p. 453–5910.1017/S0022143000031865CrossRefGoogle Scholar
Strelow, F. W. E. 1960. An ion exchange selectivity scale of cations based on equilibrium distribution coefficients. Analytical Chemistry, Vol. 32. No. 9, p. 1185–88.10.1021/ac60165a042CrossRefGoogle Scholar
Figure 0

Fig. 1. Calibration curve for the analysis of cations in ice. Measured concentrations platted against the known content of synthetic solutions. Dashed lines represent experiment I using the experimental apparatus of "altuglass" end polythene. Solid lines represent experiment 2 using the apparatus intengerd for routine analysis mager wholly of "altuglass”.

Figure 1

Table 1. Results of Experiments to Separate Cations