Hostname: page-component-7479d7b7d-rvbq7 Total loading time: 0 Render date: 2024-07-11T10:29:49.973Z Has data issue: false hasContentIssue false

On the severe non-symmetric constriction, curving or cornering of channel flows

Published online by Cambridge University Press:  19 April 2006

F. T. Smith
Affiliation:
Applied Mathematics Department, University of Western Ontario, London, Ontario, Canada
Permanent address: Mathematics Department, Imperial College, London SW7, U.K.
P. W. Duck
Affiliation:
Department of Aeronautical and Astronautical Engineering, Ohio State University, Columbus, Ohio 43210, U.S.A.
Permanent address: Mathematics Department, The University, Manchester, U.K.

Abstract

Considered below is the plane, high-Reynolds-number (Re), flow of an incompressible fluid through a channel suffering a severe non-symmetric constriction, ‘severe’ meaning ‘of typical dimensions comparable with the channel width a*’. The (mainly inviscid) flow description is governed by free streamline theory, to be consistent with the viscous incompressible separation from the constriction surface and with a relatively slow eddy motion beyond. Separation also occurs far ahead of the constriction, at a distance $O(Re^{\frac{1}{7}} a^{*})$ upstream. Attention is given primarily to the flow features for a particular class of slowly varying severe constrictions, from which however the features for the probably more useful classes of slender (i.e. of large length but O(a*) height) and moderately severe (i.e. of O(a*) length but small height) constriction follow, as do those for curved or cornered channel flows. In all these cases a long-scale flow response is induced upstream and downstream and in many cases remarkably simple universal formulae for the separation and reattachment positions result. The corresponding O(a*) corrections to the upstream separation distance above are also derived.

Type
Research Article
Copyright
© 1980 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Bates, S. 1978 Ph.D. thesis, University of London.
Cole, J. D. & Aroesty, J. 1968 Int. J. Heat Mass Transfer 11, 1167.
Dennis, S. C. R. & Smith, F. T. 1980 Proc. Roy. Soc. A (to appear).
Deshpande, M. D., Giddens, D. P. & Mabon, F. R. 1976 J. Biomech. 9, 165.
Eagles, P. M. & Smith, F. T. 1980 J. Engng. Math. (to appear).
Friedman, M. 1972 J. Engng Math. 6, 285.
Goldstein, S. 1938 Modern Develops in Fluid Mech. 1.
Goldstein, S. 1948 Quart. J. Mech. Appl. Math. 1, 43.
Greenspan, D. 1969 J. Engng Math. 3, 21.
Kirchhoff, G. 1869 J. Reine angew. Math. 70, 289.
Messiter, A. F. 1970 SIAM J. Appl. Math. 18, 241.
Messiter, A. F. 1979 Review in Proc. 8th U.S. Nat. Cong. Appl. Mech. 1978, p. 157.
Pretsch, J. 1944 Untersuch Mitt. dtsch. Luftfahrtf. no. 3091.
Smith, F. T. 1976a Quart. J. Mech. Appl. Math. 29, 343.
Smith, F. T. 1976b Quart. J. Mech. Appl. Math. 29, 365.
Smith, F. T. 1976c Proc. Roy. Soc. A 351, 71.
Smith, F. T. 1977a J. Fluid Mech. 79, 631.
Smith, F. T. 1977b Proc. Roy. Soc. A 365, 443.
Smith, F. T. 1979a J. Fluid Mech. 90, 725.
Smith, F. T. 1979b J. Fluid Mech. 92, 171.
Stewartson, K. 1974 Adv. Appl. Mech. 14, 145.
Stewartson, K. & Williams, P. G. 1969 Proc. Roy. Soc. A 312, 181.
Sychev, V. V. 1972 SV. Akad. Nauk. S.S.S.R., Mekh. Zh., Gaza 3, 47.