Hostname: page-component-848d4c4894-x24gv Total loading time: 0 Render date: 2024-05-12T08:57:01.529Z Has data issue: false hasContentIssue false
  • English
  • Français

Dunes and alternate bars in tidal channels

Published online by Cambridge University Press:  31 January 2011

PAOLO BLONDEAUX  and
GIOVANNA VITTORI
PAOLO BLONDEAUX*
Affiliation:
Department of Civil, Environmental and Architectural Engineering, University of Genoa, Via Montallegro 1, 16145 Genova, Italy
GIOVANNA VITTORI
Affiliation:
Department of Civil, Environmental and Architectural Engineering, University of Genoa, Via Montallegro 1, 16145 Genova, Italy
*
†Email address for correspondence: blx@dicat.unige.it
Get access Rights & Permissions [Opens in a new window]

Abstract

A simple idealized model is proposed to predict the appearance of alternate bottom forms in tidal channels. The model is based on the linear stability analysis of the flat seabed driven by tidal currents. The hydrodynamics is described by means of the full three-dimensional continuity and Reynolds equations. To quantify turbulent stresses, the Boussinesq assumption is introduced and an algebraic model is used for the eddy viscosity. The morphodynamics is described by the Exner equation and a simple sediment transport predictor. When applied to tidal channels, the model predicts the appearance of alternate bottom forms if the channel width is larger than a critical value. This finding agrees with previous analyses. However, the results obtained show the existence of two different modes. Close to the conditions of incipient sediment motion or when the suspended load is intense, the model suggests the appearance of an alternate sequence of shoals and pools (the first mode), characterized by a wavelength which might be comparable with the horizontal excursion of the tide. However, under such circumstances, to provide accurate quantitative results, the model should be extended to include the effects of the local acceleration and of the possible variations of the depth and width of the channel, which are neglected in the analysis. In all the other conditions, the model predicts the appearance of a second mode, presently termed tidal alternate bars. This mode is geometrically similar to the first mode, i.e. it is characterized by depositional and erosional areas which are found in an alternate arrangement, but it has significantly shorter wavelengths. In this case, the wavelength of the bedforms scales with the water depth. The physical mechanism generating tidal alternate bars appears to be the same as that generating tidal dunes, and it cannot be described by means of a depth-averaged approach.

JFM classification

Geophysical and Geological Flows: Coastal engineering Geophysical and Geological Flows: Geophysical and Geological Flows Geophysical and Geological Flows: Sediment transport
Type
Papers
Information
Journal of Fluid Mechanics , Volume 670 , 10 March 2011 , pp. 558 - 580
Copyright
Copyright © Cambridge University Press 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

Allen, J. R. L. 1984 Developments in Sedimentology. Elsevier.Google Scholar
Ashley, G. M. 1990 Classification of large-scale subaqueous bedforms: a new look at an old problem. (SEDM Bedforms and Bedding Structures Research Symposium.) J. Sediment. Petrol. 60, 160–172.Google Scholar
Barwis, J. H. 1978 Sedimentology of some South Caroline tidal-creek point bars, and a comparison with their fluvial counterparts. In Fluvial Sedimentology (ed. Miall, A. D.), pp. 129–160. Canadian Society of Petroleum Geologists Memoir, vol. 5.Google Scholar
Besio, G. 2004 Modelling of tidally generated large scale bedforms. PhD thesis, DICAT-University of Genoa, Italy.Google Scholar
Besio, G., Blondeaux, P., Brocchini, M. & Vittori, G. 2004 On the modelling of sand wave migration. J. Geophys. Res. 109, C04018, doi:10.1029/2002JC001622.Google Scholar
Besio, G., Blondeaux, P. & Frisina, P. 2003 A note on tidally generated sand waves. J. Fluid Mech. 485, 171–190.Google Scholar
Besio, G., Blondeaux, P. & Vittori, G. 2006 On the formation of sand waves and sand banks. J. Fluid Mech. 557, 1–27.CrossRefGoogle Scholar
Blondeaux, P. 1990 Sand ripples under sea waves. Part I. Ripple formation. J. Fluid Mech. 218, 1–17.CrossRefGoogle Scholar
Blondeaux, P. 2001 Mechanics of coastal forms. Annu. Rev. Fluid Mech. 33, 339–370.CrossRefGoogle Scholar
Blondeaux, P., De Swart, H. E. & Vittori, G. 2009 Long bed waves in tidal seas: an idealized model. J. Fluid Mech. 636, 485–495.Google Scholar
Blondeaux, P. & Seminara, G. 1985 A unified bar-bend theory of river meanders. J. Fluid Mech. 157, 449–470.CrossRefGoogle Scholar
Blondeaux, P. & Vittori, G. 2005 a Flow and sediment transport induced by tide propagation. Part 1. The flat bottom case. J. Geophys. Res. 110 (C8), C08003 (11 pp.).Google Scholar
Blondeaux, P. & Vittori, G. 2005 b Flow and sediment transport induced by tide propagation. Part 2. The wavy bottom case. J. Geophys. Res. 110 (C7), C07020 (13 pp.).Google Scholar
Blondeaux, P. & Vittori, G. 2009 The formation of tidal sand waves: steady versus unsteady approaches. J. Hydraul. Res. 47 (2), 213–222.CrossRefGoogle Scholar
Cherlet, J., Besio, G., Blondeaux, P., Van Lancker, V., Verfaillie, E. & Vittori, G. 2007 Modeling sand wave characteristics on the Belgian Continental Shelf and in the Calais-Dover Strait. J. Geophys. Res. 112, C06002, doi:10.1029/2007JC004089.Google Scholar
Colombini, M. 2004 Revisiting the linear theory of sand dune formation. J. Fluid Mech. 502, 1–16.CrossRefGoogle Scholar
Colombini, M., Seminara, G. & Tubino, M. 1987 Finite-amplitude alternate bars. J. Fluid Mech. 181, 213–232.CrossRefGoogle Scholar
Dalrymple, R. W. & Rhodes, R. N. 1995 Estuarine dunes and bars. In Geomorphology and Sedimentology of Estuaries. Developments in Sedimentology (ed. Perillo, G. M. E.), vol. 53, pp. 359–422. Elsevier.Google Scholar
De Swart, H. E. & Zimmerman, J. T. F. 2009 Morphodynamics of tidal inlet system. Annu. Rev. Fluid Mech. 41, 203–229.CrossRefGoogle Scholar
Dean, R. B. 1974 AERO Rep. 74-11. Imperial College, London.Google Scholar
Engelund, F. & Fredsøe, J. 1982 Sediment ripples and dunes. Annu. Rev. Fluid Mech. 14, 13–37.CrossRefGoogle Scholar
Fredsøe, J. 1978 Meandering and braiding of rivers. J. Fluid Mech. 84, 609–624.CrossRefGoogle Scholar
Garotta, V., Bolla Pittaluga, M. & Seminara, G. 2006 On the migration of tidal free bars. Phys. Fluids 18, 096601 (1–14).CrossRefGoogle Scholar
Gerkema, T. 2000 A linear stability analysis of tidally generated sand waves J. Fluid Mech. 417, 303–322.CrossRefGoogle Scholar
Hulscher, S. J. M. H. 1996 Tidal-induced large-scale regular bed-form patterns in a three-dimensional shallow water model. J. Geophys. Res. C9 (101), 20727–20744.CrossRefGoogle Scholar
Huthnance, J. M. 1982 On one mechanism forming linear sand banks. Estuar. Coast. Shelf Sci. 14, 79–99.CrossRefGoogle Scholar
Parker, G. 1976 On the cause and characteristic scale of meandering and braiding in rivers. J. Fluid Mech. 76, 459–480.CrossRefGoogle Scholar
Schlichting, H. 1932 Berechnung ebener periodischer Grenzschicht strömungen. Phys. Zeit. 33, 327–335.Google Scholar
Schramkowski, G. P., Schuttelaars, H. M. & De Swart, H. E. 2002 The effect of geometry and bottom friction on local bed forms in a tidal embayment. Cont. Shelf Res. 22, 1821–1833.Google Scholar
Seminara, G. 1998 Stability and morphodynamics. Meccanica 33, 59–99.CrossRefGoogle Scholar
Seminara, G., Lanzoni, S., Tambroni, N. & Toffolon, M. 2010 How long are tidal channels? J. Fluid Mech. 643, 479–494.CrossRefGoogle Scholar
Seminara, G. & Tubino, M. 2001 Sand bars in tidal channels. Part 1. Free bars J. Fluid Mech. 440, 49–74.CrossRefGoogle Scholar
Sleath, J. F. A. 1976 On rolling grain ripples. J. Hydraul. Res. 14, 69–81.CrossRefGoogle Scholar
Soulsby, R. L. & Whitehouse, R. J. S. 2005 Prediction of ripple properties in shelf seas. Mark 2 predictor for time evolution. Tech. Rep. TR155 Release 2.0. HR Wallingford Ltd, UK.Google Scholar
Stuart, J. T. 1966. Double boundary layers in oscillatory viscous flow. J. Fluid Mech. 24, 673–687.CrossRefGoogle Scholar
Talmon, A. M., Struiksma, N. & Van Mierlo, M. C. L. M. 1995 Laboratory measurements of the direction of sediment transport on transverse alluvial-bed slopes. J. Hydraul. Res. 33, 495–517.CrossRefGoogle Scholar
Tambroni, N., Bolla Pittaluga, M. & Seminara, G. 2005 Laboratory observations of the morphodynamic evolution of tidal channels and tidal inlets. J. Geophys. Res. 110, F04009, doi:10.1029/2004JF000243.Google Scholar
Van Rijn, L. C. 1991 Sediment transport in combined waves and currents. In Proc. Euromech 262, Balkema.Google Scholar
Vittori, G. 1989 Nonlinear viscous oscillatory flow over a small amplitude wavy wall. J. Hydraul. Res. 27, 267–280.Google Scholar
Vittori, G. & Blondeaux, P. 1990 Sand ripples under sea waves: Part 2. Finite amplitude development. J. Fluid Mech. 218, 18–33.Google Scholar
Vittori, G. & Blondeaux, P. 1992 Sand ripples under sea waves. Part 3. Brick-pattern ripple formation. J. Fluid Mech. 239, 23–45.CrossRefGoogle Scholar