Hostname: page-component-6d856f89d9-4thr5 Total loading time: 0 Render date: 2024-07-16T06:39:13.673Z Has data issue: false hasContentIssue false

The effect of jet injection geometry on two-dimensional momentumless wakes

Published online by Cambridge University Press:  26 April 2006

W. J. Park
Affiliation:
Department of Nuclear and Energy Engineering, Cheju National University, Korea
J. M. Cimbala
Affiliation:
Mechanical Engineering Department, Pennsylvania State University, University Park, PA 16802, USA

Abstract

It is shown experimentally that a two-dimensional momentumless wake is strongly dependent on the jet injection configuration of the model. Namely, the decay rate of mean velocity overshoot ranged from x−0.92 to x−2.0 for three different configurations, while the spreading rate ranged from x0.3 to x0.46 for those same configurations. The magnitude of axial turbulence intensity was also found to depend on model configuration. On the other hand, the rate of decay of axial turbulence intensity was the same (x−0.81) for all three models. In all cases the mean shear and Reynolds stress decayed rapidly, leaving nearly isotropic turbulence beyond 30 or 40 model diameters.

Appropriate length- and velocity scales are identified which normalize the mean velocity profiles into self-similar form. The shape of the normalized profile, however, was different for each configuration, indicating again that the initial conditions are felt very far downstream.

Type
Research Article
Copyright
© 1991 Cambridge University Press

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

Batchelor, G. K.: 1953 The Theory of Homogeneous Turbulence pp. 132138. Cambridge University Press.
Carmody, T.: 1964 Establishment of the wake behind a disk, Trans. ASME D: J. Basic Engng, 86. 869880.Google Scholar
Chevray, R. & Kovasznay, L. S. G. 1969 Turbulence measurements in the wake of a thin flat plate. AIAA J. 7, 16411643.Google Scholar
Cimbala, J. M. & Park, W. J., 1990 An experimental investigation of the turbulent structure in a two-dimensional momentumless wake. J. Fluid Mech. 213, 479509.Google Scholar
Finson, M. L.: 1975 Similarity behaviour of momentumless turbulent wakes. J. Fluid Mech. 71, 465479.Google Scholar
Ginevskii, A. S., Pochkina, K. A. & Ukhanova, L. N., 1966 Propagation of turbulent jet flow with zero excess impulse. Izv. Akad. Nauk. 8SSR Mekh. Zhid i Gaza 1, 164166 (English transl. Fluid Dyn., 1967, pp. 106–107).Google Scholar
Gran, R. L.: 1973 An experiment on the wake of a slender propeller-driven body. Rep. 20086–6006-RU-00. TRW Systems.Google Scholar
Higuchi, H.: 1977 Experimental investigation on axisymmetric turbulent wakes with zero momentum defect. Ph.D. thesis, California Inst. of Technology.
Lin, J. T., Pao, Y. H. & Veenhuizen, S. D., 1974 Turbulent wake of a propeller-driven slender body in stratified and non-stratified fluids. Bull Am. Phys. Soc. 9, 1165.Google Scholar
Merkitt, G. E.: 1974 Wake growth and collapse in stratified flow. AIAA. J. 12, 940949.Google Scholar
Narasimha, R. & Prabhu, A., 1972 Equilibrium and relaxation in turbulent wakes. J. Fluid Mech. 54, 117.Google Scholar
Naudascher, E.: 1965 Flow in the wake of self-propelled bodies and related sources of turbulence. J. Fluid Mech. 22, 625656.Google Scholar
Park, W. J.: 1989 An experimental investigation of the turbulent structure in two-dimensional momentumless wakes. Ph.D. thesis, The Pennsylvania State University.
Schetz, J. A. & Jakubowski, A. K., 1975 Experimental studies of the turbulent wake behind self-propelled slender bodies. AIAA J. 13, 15681575; also in AIAA Paper 75–117, 1975.Google Scholar
Schooley, A. H. & Stewart, R. W., 1963 Experiments with a self-propelled body submerged in a fluid with a vertical density gradient. J. Fluid Mech. 15, 8396.Google Scholar
Tennekes, H. & Lumley, J. L., 1972 A First Course in Turbulence. MIT Press.