No CrossRef data available.
Multilayer metallic filters for Q/V band IMUX
Published online by Cambridge University Press: 16 December 2021
Abstract
Current designs of space IMUX filters are based on dual-mode circular waveguide cavities, on dielectric resonators or, at the lower end of the frequency spectrum, on coaxial resonators. This paper presents a new kind of IMUX filter aimed at high operating frequencies (Ka, Q, and V bands) which was developed in the frame of an ESA funded study named KALOS-DEVAQ. The new filter implements a quasi-elliptic frequency response and is characterized by simple geometry. The mechanical structure is composed of stacked metallic plates and it is well suited to be manufactured, at a low cost, with high accuracy. Despite the lower unloaded Q factor, the new configuration allows achieving a comparable flatness of insertion loss and group delay, thanks to the application of the pre-distortion technique. The increased insertion loss does not affect the system performances because it can be compensated by the amplification stages in the RF chain.
- Type
- Research Paper
- Information
- Copyright
- Copyright © The Author(s), 2021. Published by Cambridge University Press in association with the European Microwave Association