Hostname: page-component-848d4c4894-xfwgj Total loading time: 0 Render date: 2024-06-19T12:59:03.886Z Has data issue: false hasContentIssue false
  • English
  • Français

Design and development of patch compensated wideband Vivaldi antenna

Published online by Cambridge University Press:  10 July 2018

Rana Pratap Yadav ,
Vinay Kumar  and
Rajveer Dhawan
Rana Pratap Yadav*
Affiliation:
Thapar Institute of Engineering and Technology, Punjab-147004, India
Vinay Kumar
Affiliation:
Thapar Institute of Engineering and Technology, Punjab-147004, India
Rajveer Dhawan
Affiliation:
Thapar Institute of Engineering and Technology, Punjab-147004, India
*
Author for correspondence: Rana Pratap Yadav, E-mail: ranayadav97@gmail.com
Get access Rights & Permissions [Opens in a new window]

Abstract

Design and fabrication of a microstrip feedline-based Vivaldi antenna in the frequency range of 6.0–8.0 GHz have been presented. The Vivaldi antenna is a planar antenna, fabricated at the microstrip feedline by having an exponentially tapered slot profile on it. An optimized computer-aided design has been developed and simulated for the desired radiation parameters like voltage standing wave ratio, bandwidth, directionality, beam-width, etc. The optimized design has been fabricated and tested. Wherever the results are not found as desired; problem has been comprehensively investigated and analyzed. This is found associated with a discontinuity at feed line, fabrication tolerance constraints and parasitic capacitance at the edges or the bent of the microstrip feedline which introduce the parasitic reactance in antenna design. Here, the presented work explores a generalized theoretical procedure for the compensation of associated problem by incorporating the reactive patch on the feedline. The developed theory is applied in fabrication and tested for the desired results.

Keywords

Antenna designmicrowave measurementsmodelling and measurements
Type
Research Papers
Information
International Journal of Microwave and Wireless Technologies , Volume 10 , Issue 9 , November 2018 , pp. 1081 - 1087
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2018 

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1.Pozar, DM (1998) Microwave Engineering. New York: John Wiley & Sons.Google Scholar
2.Gibson, PJ (1979) The Vivaldi Aerial.: Microwave Conference, 9th European, Brighton, UK, pp. 101–105.Google Scholar
3.Lewis, L, Fassett, M and Hunt, J (1974) A broadband stripline array element, Antennas and Propagation Society International Symposium, pp. 335–337.Google Scholar
4.Schaubert, D, Kollberg, E, Korzeniowski, T, Thungren, T, Johansson, J and Yngvesson., K (1985) Endfire tapered slot antennas on dielectric substrates. IEEE Transactions on Antennas and Propagation 33, 1392–1400.Google Scholar
5.Gazit, E (1988) Improved design of the Vivaldi antenna. IEE Proceedings H – Microwaves, Antennas and Propagation 135, 89–92.Google Scholar
6.Langley, JDS, Hall, PS and Newham, P (1993) Novel ultrawide-bandwidth Vivaldi antenna with low cross polarization. Electronics Letters 29, 2004–2005.Google Scholar
7.Langley, JDS, Hall, PS and Newham, P(1996) Balanced antipodal Vivaldi antenna for wide bandwidth phased arrays. IEEE Proceedings – Microwaves, Antennas and Propagation 143, 97–102.Google Scholar
8.Kim, S-G and Chang, K (2004) A low cross-polarized antipodal Vivaldi antenna array for wideband operation. IEEE Antennas and Propagation Society International Symposium, 3, 2269–2272.Google Scholar
9.Shuppert, B (1988) Microstrip/slotline transitions: modeling and experimental investigation. IEEE Transactions on Microwave Theory and Techniques 36, 1272–1282.Google Scholar
10.Sloan, R, Zinieris, MM and Davis, LE (1998) A broadband microstrip to slotline transition. Microwave and Optical Technology Letters 18, 339–342.Google Scholar
11.Shin, J and Schaubert, DH. (1999) A parameter study of stripline-fed Vivaldi notch-antenna arrays. IEEE Transactions on Antennas and Propagation 47, 879–886.Google Scholar
12.El-Hameed, ASA, Barakat, A, Abdel-Rahman, AB, Allam, A and Pokharel, RK (2015) A 60-GHz double-Y balun-fed on-chip Vivaldi antenna with improved gain, 27th International Conference on Microelectronics (ICM), Casablanca, pp. 307–310.Google Scholar
13.Liu, Y, Zhou, W, Yang, S, Li, W, Li, P and Yang, S (2016) A novel miniaturized Vivaldi antenna using tapered slot edge with resonant cavity structure for ultra-wide band applications. IEEE Antennas & Wireless Propagation Letters 15, 1881–1884.Google Scholar
14.Wang, YW, Wang, GM and Zong, BF (2013) Directivity improvement of Vivaldi antenna using double-slot structure. IEEE Antennas and Wireless Propagation Letters 12, 1380–1383.Google Scholar
15.Wan Ahmad Khairuddin, WNAB, Othman, MA, Misran, MH, Abd. Aziz, MZA, Sulaiman, HA and Kamarudin, MR. (2015) Investigation of triangular, circular and ellipse slots of Vivaldi antenna, Computer, Communications, and Control Technology (I4CT), International Conference, Kuching, pp. 181–185.Google Scholar
16.Collin, RE (1956) The optimum tapered transmission line matching section. Proceedings of the IRE 44, 539–548.Google Scholar
17.Yadav, RP, Kumar, S, and Kulkarni, SV. (2013) Design and development of the 3 dB patch compensated tandem hybrid coupler. Review of Scientific Instruments 84, 014702.Google Scholar
18.Yadav, RP, Kumar, S and Kulkarni, SV. (2014) Design and development of ultra-wideband 3 dB hybrid coupler for ICRF heating in Tokamak. Review of Scientific Instruments 85, 044706.Google Scholar