Hostname: page-component-7479d7b7d-jwnkl Total loading time: 0 Render date: 2024-07-12T14:26:04.887Z Has data issue: false hasContentIssue false
  • English
  • Français

Traceability and method validation in a photometry laboratory

Published online by Cambridge University Press:  29 June 2011

O. Pellegrino ,
C. Pires  and
E. Filipe
O. Pellegrino*
Affiliation:
Laboratório de Fotometria, Radiometria e Radiofrequências, IPQ, Portugal
C. Pires
Affiliation:
Laboratório de Fotometria, Radiometria e Radiofrequências, IPQ, Portugal
E. Filipe
Affiliation:
Directora do Departamento de Metrologia, IPQ, Portugal
*
⋆ Correspondence: opellegrino@mail.ipq.pt
Get access

Abstract

This article displays how the photometry laboratory of the Portuguese Institute for Quality complies with the measurement traceability and method validation, the technical requirements 5.4 and 5.6 of the ISO/IEC 17025. After the presentation of the existing means and the way the metrological traceability is obtained, a short introduction to the internal validation of the measurement method is displayed for the luminous intensity, the illuminance and the illuminance responsivity.

Keywords

Luminous intensityilluminanceilluminance responsivitymetrological traceabilityinternal verification of measurement method
Type
Research Article
Information
International Journal of Metrology and Quality Engineering , Volume 2 , Issue 1 , 2011 , pp. 1 - 4
Copyright
© EDP Sciences 2011

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

J.W.T. Walsh, Photometry, 3rd edn. (Constable & Co. Ltd., 1958)
ISO/IEC 17025:2005, General requirements for the competence of testing and calibration laboratories
CNAM-INM, Calibration Certificate n° 1139-ra-05, Standard lamp of luminous intensity (2005); Y. Ohno, NIST Special Publication 250-37, NIST measurement Services: Photometric Calibrations (1997)
ISO 5725-2:1994, Accuracy (trueness and precision) of measurement methods and results, Part 2: basic method for the determination of repeatability and reproducibility of a standard measurement method
G. Sauter, CIE Uncertainty Symposium – Tutorial (2006)
ASTM E691-92, Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
ISO/IEC Guide 98-3:2008, Guide to the expression of Uncertainty in Measurement (GUM:1995) (published by ISO in the name of BIPM, IEC, IFCC, IUPAC, IUPAP and OIML)
ISO/IEC Guide 98-3:2008, Guide to the expression of Uncertainty in Measurement (GUM:1995) (published by ISO in the name of BIPM, IEC, IFCC, IUPAC, IUPAP and OIML), Part 5.1
J. Bastié, La Photométrie photoélectrique à l’Institut National de Métrologie du Conservatoire National des Arts et Métiers, Bulletin BNM (1974)
JCGM 200:2008, International vocabulary of metrology – Basic and general concepts and associated terms (VIM), BIPM, IEC, IFCC, ILAC, ISO, IUPAC, IUPAP and OIML
JCGM 200:2008, International vocabulary of metrology – Basic and general concepts and associated terms (VIM), BIPM, IEC, IFCC, ILAC, ISO, IUPAC, IUPAP and OIML, 2.43 Note
Key Comparison EURAMET.PR-K3.A, Luminous intensity, pilot PTB, Draft Report to release in 2010