Hostname: page-component-848d4c4894-pjpqr Total loading time: 0 Render date: 2024-06-30T01:17:29.641Z Has data issue: false hasContentIssue false
  • English
  • Français

Development and Characterization of Sintered Zeolite and Zeolite-Kaolin Wick Structure for Thermosiphon Heat-Pipe Application

Published online by Cambridge University Press:  01 January 2024

Muhammad Aon Ali ,
Tzong-Shyng Leu ,
Chih-Yuan Weng  and
Hafiz Muhammad Ali
Muhammad Aon Ali
Affiliation:
Department of Mechanical Engineering, National Chung Cheng University, No. 168, Sec. 1, University Road, Minhsiung, 62102, Chiayi, Taiwan, Republic of China International Doctoral Degree Program On Energy Engineering, National Cheng Kung University, Tainan City 70101, Taiwan
Tzong-Shyng Leu
Affiliation:
Institute of Aeronautics and Astronautics, National Cheng Kung University, No. 1, University Road, Tainan, Taiwan 70101, Republic of China
Chih-Yuan Weng
Affiliation:
Department of Mechanical Engineering, Air Force Institute of Technology, Kaohsiung City 820, Taiwan, Republic of China
Hafiz Muhammad Ali*
Affiliation:
Mechanical Engineering Department, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia Interdisciplinary Research Center for Renewable Energy and Power Systems (IRC-REPS), King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia
*
e-mail: hafiz.ali@kfupm.edu.sa
Get access Rights & Permissions [Opens in a new window]

Abstract

A wick structure is the core part of a heat pipe that produces capillaries to move liquid from a condenser to an evaporator. The purpose of the current study was to develop a wick structure from zeolite and kaolin using various sintering methods. Due to significant porosity and water-adsorption properties, zeolite and kaolin can produce a large capillary force inside the heat pipe. A porous wick specimen is developed from pure zeolite together with a mixture of zeolite and kaolin by using pressureless (loosely packed) and conventional pressurized sintering for thermosiphon heat-pipe applications. Major properties such as porosity, water adsorption, and permeability were noted to be better under pressureless sintering compared to pressurized sintering. Significant and uneven shrinkage in both radial and linear directions is a major problem in loosely packed sintering of pure zeolite. However, the addition of kaolin helps to overcome the problem of porosity and shrinkage in pure zeolite; but the permeability and strength of the wick structure are reduced with the addition of kaolin. A general trend is that increasing porosity causes increasing permeability. Due to grain size and compaction, however, permeability is reduced with the addition of kaolin. Based on the experimental results for porosity and permeability, the wick structure formed from zeolite with 5–10% of kaolin has better thermal properties for heat-pipe applications.

Keywords

PermeabilityPorosityWickZeoliteZeolite-kaolin mixture
Type
Original Paper
Information
Clays and Clay Minerals , Volume 70 , Issue 6 , December 2022 , pp. 850 - 864
Copyright
Copyright © The Author(s), under exclusive licence to The Clay Minerals Society 2023

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

Footnotes

Associate Editor: Prakash Malla

References

Akalin, G. O., Oztuna Taner, O., & Taner, T. (2021). The preparation, characterization and antibacterial properties of chitosan/pectin silver nanoparticle films. Polymer Bulletin, 79, 3495–3512.CrossRefGoogle Scholar
Berti, L. F., Santos, P. H. D., Bazzo, E., Janssen, R., Hotza, D., & Rambo, C. R. (2011). Evaluation of permeability of ceramic wick structures for two phase heat transfer devices. Applied Thermal Engineering, 31, 1076–1081.CrossRefGoogle Scholar
Beyhaghi, S., Geoffroy, S., Prat, M., & Pillai, K. M. (2014). Wicking and evaporation of liquids in porous wicks: A simple analytical approach to optimization of wick design. AIChE Journal, 60, 1930–1940.CrossRefGoogle Scholar
Bish, D. L., & Carey, J. W. (2001). Thermal behavior of natural zeolites. Reviews in Mineralogy and Geochemistry, 45, 403–452.CrossRefGoogle Scholar
Chandrasekhar, S., & Pramada, P. N. (2001). Sintering behaviour of calcium exchanged low silica zeolites synthesized from kaolin. Ceramics International, 27, 105–114.CrossRefGoogle Scholar
Chandrasekhar, S., & Pramada, P. (2004). Kaolin-based zeolite y, a precursor for cordierite ceramics. Applied Clay Science, 27, 187–198.CrossRefGoogle Scholar
Cruciani, G. (2006). Zeolites upon heating: Factors governing their thermal stability and structural changes. Journal of Physics and Chemistry of Solids, 67, 1973–1994.CrossRefGoogle Scholar
de'Gennaro, R., Cappelletti, P., Cerri, G., de'Gennaro, M., Dondi, M., Guarini, G., Langella, A., & Naimo, D. (2003). Influence of zeolites on the sintering and technological properties of porcelain stoneware tiles. Journal of the European Ceramic Society, 23, 2237–2245.CrossRefGoogle Scholar
Demirkiran, A. Ş., Artir, R., & Avci, E. (2008). Effect of natural zeolite addition on sintering kinetics of porcelain bodies. Journal of Materials Processing Technology, 203, 465–470.CrossRefGoogle Scholar
Gu, S., Zhang, X., Wang, L., Gan, X., Shen, Z., & Jiang, W. (2015). Direct indication of a higher central temperature achieved during spark plasma sintering process of a zeolite. Journal of the European Ceramic Society, 35, 1599–1603.CrossRefGoogle Scholar
Ha, J.-H., Jung, D.-W., Ahmad, R., & Song, I.-H. (2014). Successful preparation of self-setting particle-stabilized zeolite 13x foams. Journal of the Ceramic Society of Japan, 122, 276–280.CrossRefGoogle Scholar
Hwang, H., Seoung, D., Lee, Y., Liu, Z., Liermann, H.-P., Cynn, H., Vogt, T., Kao, C.-C., & Mao, H.-K. (2017). A role for subducted super-hydrated kaolinite in earth's deep water cycle. Nature Geoscience, 10, 947–953.CrossRefGoogle Scholar
Innocentini, M. D. M., & Pandolfelli, V. C. (2001). Permeability of porous ceramics considering the klinkenberg and inertial effects. Journal of the American Ceramic Society, 84, 941–944.CrossRefGoogle Scholar
Jing, N., Wang, Q., Cheng, L., Luo, Z., & Cen, K. (2013). The sintering behavior of coal ash under pressurized conditions. Fuel, 103, 87–93.CrossRefGoogle Scholar
Khalid, S. U., Babar, H., Ali, H. M., Janjua, M. M., & Ali, M. A. (2020). Heat pipes: Progress in thermal performance enhancement for microelectronics. Journal of Thermal Analysis and Calorimetry., 143, 2227–2243.CrossRefGoogle Scholar
Khalid, S. U., Babar, H., Ali, H. M., Janjua, M. M., & Ali, M. A. (2021). Heat pipes: Progress in thermal performance enhancement for microelectronics. Journal of Thermal Analysis and Calorimetry, 143, 2227–2243.CrossRefGoogle Scholar
Koohsaryan, E., & Anbia, M. (2016). Nanosized and hierarchical zeolites: A short review. Chinese Journal of Catalysis, 37, 447–467.CrossRefGoogle Scholar
Kumaresan, G., Vijayakumar, P., Ravikumar, M., Kamatchi, R., & Selvakumar, P. (2019). Experimental study on effect of wick structures on thermal performance enhancement of cylindrical heat pipes. Journal of Thermal Analysis and Calorimetry, 136, 389–400.CrossRefGoogle Scholar
Midiani, L. P. I., Septiadi, W. N., Winaya, I. N. S., Sucipta, M., & Putra, N. (2019). Characterization of capillary pumping amount in novel sintered zeolites and hybrid zeolite-cu for heat pipe applications. International Journal of Heat and Mass Transfer, 145, 118759.CrossRefGoogle Scholar
Mopoung, S., Sriprang, N., & Namahoot, J. (2014). Sintered filter materials with controlled porosity for water purification prepared from mixtures with optimal ratio of zeolite, bentonite, kaolinite, and charcoal. Applied Clay Science, 88–89, 123–128.CrossRefGoogle Scholar
Mopoung, S., Namahoot, J., Sriprang, N., Naudom, U., Sittijanda, S., Sriaphai, S., Pengpajon, P., Kammee, D., Rakharn, N., & Baosaree, J. (2018). The effect of rice husk charcoal and sintering temperature on porosity of sintered mixture of clay and zeolite. Indian Journal of Science and Technology, 11, 1–12.Google Scholar
Mostafa, N. Y., Shaltout, A. A., Abdel-Aal, M. S., & Elmaghraby, A. (2010). Sintering mechanism of blast furnace slag–kaolin ceramics. Materials & Design, 31, 3677–3682.CrossRefGoogle Scholar
Musyoka, N. M., Petrik, L. F., Hums, E., Kuhnt, A., & Schwieger, W. (2013). Thermal stability studies of zeolites a and x synthesized from south african coal fly ash. Research on Chemical Intermediates, 41, 575–582.CrossRefGoogle Scholar
Nemec, P. (2018). Porous structures in heat pipes. In Porosity - process, technologies and applications (pp. 141–180). InTech.Google Scholar
Nikolajsen, K., Kiwi-Minsker, L., & Renken, A. (2006). Structured fixed-bed adsorber based on zeolite/sintered metal fibre for low concentration voc removal. Chemical Engineering Research and Design, 84, 562–568.CrossRefGoogle Scholar
Nugraha, P. F., & Putra, N. (2019). The fabrication and testing development of heat pipe wicks: A review. Proceedings of the 2019 IEEE 2nd International Conference on Power and Energy Applications (ICPEA), 2019, pp. 264–271.CrossRefGoogle Scholar
Oghbaei, M., & Mirzaee, O. (2010). Microwave versus conventional sintering: A review of fundamentals, advantages and applications. Journal of Alloys and Compounds, 494, 175–189.CrossRefGoogle Scholar
Ondruška, J., Húlan, T., Sunitrová, I., Csáki, Š., Łagód, G., Struhárová, A., & Trník, A. (2021). Thermophysical properties of kaolin–zeolite blends up to 1100°C. Crystals, 11, 165.CrossRefGoogle Scholar
Padmavathi, C., Upadhyaya, A., & Agrawal, D. (2011). Effect of microwave and conventional heating on sintering behavior and properties of al–mg–si–cu alloy. Materials Chemistry and Physics, 130, 449–457.CrossRefGoogle Scholar
Qian, B., & Shen, Z. (2018). Laser sintering of ceramics. Journal of Asian Ceramic Societies, 1, 315–321.CrossRefGoogle Scholar
Respati, S. M. B., Soenoko, R., Irawan, Y. S., & Suprapto, W. (2016b). Effect of low temperature sintering on the porosity and microstructure of porous zeolite ceramic. Applied Mechanics and Materials, 836, 219–223.CrossRefGoogle Scholar
Respati, B., Soenoko, R., Irawan, S., Suprapto, W., Saputra, B., & Purwanto, H. (2017). Capillary velocity of natural zeolite porous ceramic in difference sintering temperatures. MM Science Journal, 2017, 1803–1805.CrossRefGoogle Scholar
Respati, S. M. B., Soenoko, R., Irawan, Y. S., & Suprapto, W. (2016a). Effect of low temperature sintering on the porosity and microstructure of porous zeolite ceramic. Proceedings of the Applied Mechanics and Materials, Trans Tech Publ, pp. 219–223.CrossRefGoogle Scholar
Respati, S. M. B., Soenoko, R., Irawan, Y. S., & Suprapto, W. (2018). Interfacial shear stress with pull-out test at zeolite ceramic matrix and ss316 single fiber. Matéria (Rio de Janeiro), 23.CrossRefGoogle Scholar
Sabahi Namini, A., Ahmadi, Z., Babapoor, A., Shokouhimehr, M., & Shahedi Asl, M. (2019). Microstructure and thermomechanical characteristics of spark plasma sintered tic ceramics doped with nano-sized wc. Ceramics International, 45, 2153–2160.CrossRefGoogle Scholar
Şan, O., Abalι, S., & Hoşten, Ç. (2003). Fabrication of microporous ceramics from ceramic powders of quartz–natural zeolite mixtures. Ceramics International, 29, 927–931.CrossRefGoogle Scholar
Sanhoob, M. A., Muraza, O., Yoshioka, M., Qamaruddin, M., & Yokoi, T. (2018). Lanthanum, cerium, and boron incorporated zsm-12 zeolites for catalytic cracking of n -hexane. Journal of Analytical and Applied Pyrolysis, 129, 231–240.CrossRefGoogle Scholar
Scheidegger, A. E. (2020). The physics of flow through porous media. The physics of flow through porous media (3rd edition), University of Toronto press.Google Scholar
Sunitrová, I., & Trník, A. (2018). Dsc and tga of a kaolin-based ceramics with zeolite addition during heating up to 1100°C. Pp. 1988, 020046.CrossRefGoogle Scholar
Sutharsini, U., Thanihaichelvan, M., & Singh, R. (2018) Two-step sintering of ceramics. pp. Sintering of functional materials. pp. 3–21.CrossRefGoogle Scholar
Taner, T. (2018). Energy and exergy analyze of pem fuel cell: A case study of modeling and simulations. Energy, 143, 284–294.CrossRefGoogle Scholar
Taner, T. (2021). The novel and innovative design with using h2 fuel of pem fuel cell: Efficiency of thermodynamic analyze. Fuel, 302, 121109.CrossRefGoogle Scholar
Watanabe, Y., Ikoma, T., Suetsugu, Y., Yamada, H., Tamura, K., Komatsu, Y., Tanaka, J., & Moriyoshi, Y. (2006). The densification of zeolite/apatite composites using a pulse electric current sintering method: A long-term assurance material for the disposal of radioactive waste. Journal of the European Ceramic Society, 26, 481–486.CrossRefGoogle Scholar
Wudy, K., Hinze, M., Ranft, F., Drummer, D., & Schwieger, W. (2017). Selective laser sintering of zeolite filled polypropylene composites: Processing and properties of bulk adsorbents. Journal of Materials Processing Technology, 246, 136–143.CrossRefGoogle Scholar
Yang, M., Wang, H., Chen, R., Gong, Y., Huang, Z., Ran, G., Chen, X., Lu, T., & Xiao, C. (2018). Comparison of the microwave and conventional sintering of li2tio3 ceramic pebbles. Ceramics International, 44, 19672–19677.CrossRefGoogle Scholar
Zarandi, M. A. F., Pillai, K. M., & Barari, B. (2018). Flow along and across glass-fiber wicks: Testing of permeability models through experiments and simulations. AIChE Journal, 64, 3491–3501.CrossRefGoogle Scholar