Hostname: page-component-84b7d79bbc-x5cpj Total loading time: 0 Render date: 2024-07-30T09:04:35.197Z Has data issue: false hasContentIssue false
  • English
  • Français

The Turbulent Supersonic Base Pressure Problem: A Comparison between a Theory and Some Experimental Evidence

Published online by Cambridge University Press:  07 June 2016

H. McDonald
H. McDonald*
Affiliation:
British Aircraft Corporation (Operating) Ltd., Preston Division*
Get access

Summary

A comparative study is made of a recent theoretical approach to the problem of predicting the supersonic, turbulent base pressure and of the experimental evidence. The theory is based on the Chapman-Korst flow model of separated flows with a modified recompression process. Due allowance can be made for the presence of the initial boundary layer, with the limitation that its thickness must be less than about one step height at low Mach numbers, dropping to about one third of a step height at M=3·0. Fairly good agreement between the predicted and measured base pressure can be obtained although a predicted Reynolds number effect is not observed. The absence of this Reynolds number effect is. discussed in the light of recent experiments on flow mixing.

Type
Research Article
Information
Aeronautical Quarterly , Volume 17 , Issue 2 , May 1966 , pp. 105 - 126
Copyright
Copyright © Royal Aeronautical Society. 1966

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1. Korst, H. H. A theory for base pressures in transonic and supersonic flow. Journal of Applied Mechanics, Vol. 23, p. 593, 1956.CrossRefGoogle Scholar
2. Korst, H. H., Chow, W. L. and Zumwalt, G. W. Research on transonic and supersonic flow of a real fluid at abrupt increases in cross-section. University of Illinois, ME-TR-392-5, December 1959.Google Scholar
3. Nash, J. F. An analysis of two dimensional turbulent base flow including the effect of the approaching boundary layer. National Physical Laboratory Aero. Report 1036, July 1962.Google Scholar
4. McDonald, H. Turbulent shear layer re-attachment with special emphasis on the base pressure problem. Aeronautical Quarterly, Vol. XV, p. 247, August 1964.CrossRefGoogle Scholar
5. McDonald, H. A study of the turbulent separated flow region occurring at a compression corner in supersonic flow. Journal of Fluid Mechanics, Vol. 22, Part 3, p. 481, 1965.CrossRefGoogle Scholar
6. McDonald, H. An analysis of the turbulent base pressure problem in supersonic axisymmetric flow. Aeronautical Quarterly, Vol. XVI, p. 97, May 1965.CrossRefGoogle Scholar
7. Beastall, D. and Eggink, H. Some experiments on breakaway in supersonic flow. Part II. RAE Tech. Note Aero. 2061, November 1951.Google Scholar
8. Fuller, L. and Reid, J. Experiments on two-dimensional base flow at M=2-4. RAE Aero Report 2569, February 1956.Google Scholar
9. Hastings, R. C. Turbulent flow past two-dimensional bases in supersonic streams. RAE Tech. Note Aero. 2931, December 1963.Google Scholar
10. Sirieux, M. Pression de culot et processus de melange turbulent en écoulement supersonique plan. La Recherche Aéronautique, September /October 1960.Google Scholar
11. Carriere, P. and Sirieux, M. Facteurs d’influence du recollement d’un écoulement supersonique. Office Nationale d’Etudes et de Recherches Aéronautiques, ONERA, Memo Technique 20, 1961.Google Scholar
12. Gadd, C. E., Holder, D. W. and Regan, J. D. Base pressures in supersonic flow. ARC 17 490, March 1955.Google Scholar
13. Chapman, D. R., Wimbrow, W. R. and Kesler, R. H. Experimental investigation of base pressure on blunt trailing edge wings at supersonic velocities. NACA TN 2611, 1952.Google Scholar
14. Charwat, A. F., Dewey, C. F., Roos, J. N. and Hrrz, J. A. An investigation of separated flows. II: Flow in the cavity and heat transfer. Journal of the Aeronautical Sciences, Vol. 28, Part 7, p. 513, 1961.Google Scholar
15. Wimbrow, W. R. Effects of base bleed on the base pressure of blunt trailing edge airfoils at supersonic speeds. NACA RM A54A07, 1954. (British TIL 4148.)Google Scholar
16. Badrinarayan, M. A. An experimental investigation of base flows at supersonic speeds. Journal of the Royal Aeronautical Society, Vol. 65, p. 475, July 1961.CrossRefGoogle Scholar
17. Goin, K. L. Effects of plan form, airfoil section and angle of attack on the pressures along the base of blunt trailing edge wings of Mach numbers at 141, 1-62 and 1-96. NACA RM L52D21 (Ministry of Aviation TIB 3324), 1952.Google Scholar
18. Morrow, J. D. and Katz, E. Flight investigation at Mach numbers from 06 to 17 to determine drag and base pressures on a blunt trailing edge airfoil and drag of diamond and circular arc airfoils at zero lift. NACA TN 3548, 1955.Google Scholar
19. Thomann, H. Measurements of heat transfer and recovery temperature in regions of separated flow at a Mach number of 18. FFA (Stockholm) Report 82, November 1958.Google Scholar
20. Donaldson, I. S. The effect of sting supports on the base pressure of a blunt-based body in a supersonic stream. Aeronautical Quarterly, Vol. VI, p. 221, August 1955.CrossRefGoogle Scholar
21. Potter, J. L., Whitfield, J. D. and Strike, W. T. Transition measurements and the correlation of transition sensitive data. Arnold Engineering Development Center TR-59-4, February 1959.Google Scholar
22. Chapman, D. R. An analysis of base pressure at supersonic velocities and comparison with experiments. NACA Report 1051, 1951.Google Scholar
23. Sivier, K. R. and Bogdonoff, S. M. The effect of support interference on the base pressure of a body of revolution. Princeton University Report No. 332, AFOSR RN-55T301, October 1955.Google Scholar
24. Rebuffet, R. Effets de supports sur l’écoulement a l’arrière d’un corps. AGARD Report 302, March 1959.Google Scholar
25. Reid, J. and Hastings, R. C. Experiments on the axi-symmetric flow over afterbodies and base at M = 20. RAE Report Aero. 2628, October 1959.Google Scholar
26. Roshko, A. and Thomke, G. J. Flow separation and re-attachment behind a downstream facing step. Douglas Aircraft Company Report SM-43056-1, January 1964.Google Scholar
27. White, R. A. Turbulent boundary layer separation from smooth convex surfaces in supersonic two dimensional flow. PhD Thesis, University of Illinois, 1963.Google Scholar
28. Holdaway, G. H. and Wallace, M. R. Investigation of axially symmetric flow over steps at transonic speeds with comparisons of estimated and experimental drag results. NACA RM A57E24, July 1957.Google Scholar
29. Nash, J. F., Quincey, V. G. and Callinan, J. Experiments on two dimensional base flow at subsonic and transonic speeds. National Physical Laboratory Aero. Report 1070, January 1963.Google Scholar
30. Saltzman, E. J. Preliminary base pressures obtained from the X-15 airplane at Mach numbers from 11 to 3-2. NACA TN D-1056, August 1961.Google Scholar
31. Reller, J. O. and Hamaker, F. M. An experimental investigation of the base pressure characteristics of non-lifting bodies of revolution of Mach numbers from 273 to 4-98. NACA TN 3393, 1952.Google Scholar
32. Larson, R. E., Scott, C. J., Elgin, D. R. and Seiver, R. E. Turbulent base flow investigations at Mach number 3. University of Minnesota Research Report No. 183, (NASA CR-55718), July 1962.Google Scholar
33. Cooke, J. C. Separated supersonic flow. RAE Tech. Note Aero. 2879, March 1963.Google Scholar
34. Head, M. R. Entrainment in the turbulent boundary layer. ARC 20 383, September 1958.Google Scholar
35. McDonald, H. Calculation of the turbulent supersonic base pressure in two-dimensional flow. Warton (British Aircraft Corporation Ltd.) FORTRAN Programme No. 15, 1965.Google Scholar
36. McDonald, H. Calculation of the turbulent base pressure in axisymmetric flow. Warton (British Aircraft Corporation Ltd.) FORTRAN Programme No. 24, 1965.Google Scholar
37. Maskell, E. C. Approximate calculation of the turbulent boundary layer in two-dimensional incompressible flow. RAE Report Aero. 2443, November 1951.Google Scholar
38. Mager, A. Transformation of the compressible turbulent boundary layer. Journal of the Aeronautical Sciences, Vol. 25, No. 5, p. 305, 1958.Google Scholar
39. Coles, D. E. The turbulent boundary layer in a compressible fluid. ARC 24 497, September 1962.Google Scholar
40. Maydew, R. C. and Reed, J. F. Turbulent mixing of axi-symmetric compressible jets (in the half-jet region) with quiescent air. Sandia Corporation, Albuquerque, New Mexico, Report SC-4764 (R.R.), March 1963.Google Scholar
41. Zumwalt, G. W. and Tang, H. H. Transient base pressure study. Oklahoma State University Research Department SBW-6, February 1964.Google Scholar
42. Thomke, G. J. Separation and re-attachment of supersonic turbulent boundary layer behind down stream facing steps and over cavities. Douglas Aircraft Company Report SM-43062, March 1964.Google Scholar
43. Roberts, J. B. On the Prediction of base pressure in two-dimensional supersonic turbulent flow. National Gas Turbine Establishment Report No. R.265, November 1964.Google Scholar
44. Bradshaw, P. The effect of initial conditions on the development of a free shear layer. National Physical Laboratory Aero. Report 1117, September 1964.Google Scholar
45. McDonald, H., and Stoddart, J. A. P. On the development of the incompressible turbulent boundary layer. British Aircraft Corporation (Warton) Aero. Tech. Note 225, March 1965.Google Scholar
46. Bauer, R. C. Theoretical base pressure analysis of axi-symmetrio ejectors without induced flow. Arnold Engineering Development Center Technical Document Report No. TDR-64-3, January 1964.Google Scholar
47. Curle, N. The laminar boundary layer equations, p. 153. Oxford Mathematical Monographs, Oxford University Press, 1962.Google Scholar
48. Newman, B. G. Some contributions to the study of the turbulent boundary layer near separation. Aeronautical Research Consultative Committee (Australia), Report ACA-53, March 1951.Google Scholar
49. Sandborn, V. A. and Slogar, R. J. Study of the momentum distribution of turbulent boundary layers in adverse pressure gradients. NACA TN 3264, January 1955.Google Scholar
50. Schubauer, G. B. and Klebanoff, P. S. Investigation of separation of the turbulent boundary layer. NACA Report 1030, 1951.Google Scholar
51. Mueller, T. J. and Robertson, J. M. A study of the mean motion and turbulence downstream of a roughness element. Modern developments in theoretical and applied mechanics, Vol. I. Plenum Press, New York, 1963.Google Scholar
52. Klebanoff, P. S. and Diehl, Z. W. Some features of artificially thickened fully developed turbulent boundary layers with zero pressure gradients. NACA Report 1110, 1952.Google Scholar
53. McCullough, G. B. and Gault, D. E. Boundary layer and stalling characteristics of the NACA 64 A006 Airfoil Section. NACA TN 1923, August 1949.Google Scholar
54. Tillman, W. Investigations of some particularities of turbulent boundary layers on plates. Ministry of Aircraft Production R & T MAP-VG-34, 1964.Google Scholar
55. Young, A. D. Modern developments in fluid dynamics. High Speed Flow, Vol. I, Chap. X. (Ed. Howarth, L..) Oxford, Clarendon Press, 1953.Google Scholar
56. Crocco, L. and Lees, L. A mixing theory for the interaction between dissipative flows and nearly isentropic streams. Journal of the Aeronautical Sciences, Vol. 19, No. 10, p. 649, October 1952.CrossRefGoogle Scholar
57. Love, E. S. The base pressure at supersonic speeds on two dimensional airfoils and bodies of revolution (with and without fins) having turbulent boundary layers. NACA RM L53C02, April 1953.Google Scholar
58. Nash, J. F. The effect of the initial boundary layer on the development of a turbulent free shear layer. National Physical Laboratory Aero. Report 1019, June 1962.Google Scholar
59. Kirk, F. N. An approximate theory of base pressure in two dimensional flow at supersonic speeds. RAE Tech. Note Aero. 2377, December 1959.Google Scholar