Hostname: page-component-848d4c4894-cjp7w Total loading time: 0 Render date: 2024-06-22T06:29:17.587Z Has data issue: false hasContentIssue false
  • English
  • Français

Residual Stresses in Al2O3/SiC (Whisker) Composites Containing Interfacial Carbon Films

Published online by Cambridge University Press:  06 March 2019

Alias Abuhasan  and
Paul K. Predecki
Alias Abuhasan
Affiliation:
Department of Engineering University of Denver Denver, CO 80208
Paul K. Predecki
Affiliation:
Department of Engineering University of Denver Denver, CO 80208
Get access

Abstract

Residual strains and stresses were measured in hot-pressed α-Al2O3 composites containing 25 wt% β (cubic) SiC whiskers with and without a 50-100Å thick carbon coating. X-ray diffraction methods were used including the separation of macrostresses from the microstresses in the -Al2O3 and SiC phases by the method of Noyan and Cohen. The presence of the carbon coating on the whiskers reduced the magnitude of the residual microstresses in the whiskers by ˜13% and in the matrix by ˜10%. The measured residual stresses in the whiskers and the reduction due to the carbon film were in good agreement with calculations from recent models proposed by Hsueh, Becher and Angelini, and by Li and Bradt.

Type
VII. X-Ray Stress Analysis
Information
Advances in X-Ray Analysis , Volume 32: Thirty-Seventh Annual Conference on Applications of X-ray Analysis, August 1-5, 1988 , 1988 , pp. 471 - 479
Copyright
Copyright © International Centre for Diffraction Data 1988

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

(1) Predecki, P., Abuhasan, A. and Barrett, C.S., Advances in X-Ray Analysi, 31, 231–243 (1988).Google Scholar
(2) Noyan, I.C. and Cohen, J.B., Mat. Sci, and Eng. 75. 179 (1985).Google Scholar
(3) Cohen, J.B., Powder Diffraction 1, 15 (1986).Google Scholar
(4) Personal Communication, Dr. J. Rhodes, Advanced Composite Matls. Inc,Google Scholar
(5) Hsueh, C-H., Becker, P.F. and Angelini, P., J. Am. Ceram. Soc. , 71 [11], 929-33 (1988).Google Scholar
(6) Li, Z. and Bradt, R.C., “Micromechanical Stresses in SiC Reinforced Al2O3 Composites,” presented at the 90th Annual Mtg. of the American Ceramic Soc. , Cincinnati, OH, May 1988. To be published in Jan. 1989 issue of J. Am. Ceram. Soc.Google Scholar
(7) Delmonte, J., “Technology of Carbon and Graphite Fiber Composites,” Van Nostrand, 1981, p. 43.Google Scholar
(8) Information provided by Pure Industries, Inc. , St, Marys, PA.Google Scholar