Hostname: page-component-848d4c4894-pjpqr Total loading time: 0 Render date: 2024-07-05T16:41:06.641Z Has data issue: false hasContentIssue false

A High-Temperature Study of Phase Precipitation in Superalloys

Published online by Cambridge University Press:  06 March 2019

John F. Radavich*
Affiliation:
Physics Department, Purdue University Lafayette, Indiana
Get access

Abstract

Many of the iron- and nickel-base superalloys exhibit brittle properties on heat treatment, welding, or other fabrication processes at temperatures of about 2000°F or higher. Studies have been carried out by means of electron microscopy, electron diffraction, and X-ray diffraction and fluorescence analysis of the precipitation in the metal and in an isolated form.

Results of the electron microscope study of the surface of the metal show a grain boundary constituent to be present which increases in amount as the temperature is increased. Studies on the isolated residue of such samples show a very thin “featherlike” film to be located at the grain boundaries and enclosing the grains. Electron diffraction, X-ray diffraction, and X-ray fluorescence analysis studies of the thin films indicate that they are a TiC phase with very little alloying elements in solution.

At temperatures above 2000°F the thin film becomes quite thick and tends to force the grains apart. It is believed that this form of the TiC phase promotes the severe embrittling nature of these alloys at high temperatures. Suitable heat treatment at lower temperatures causes the TiC film to agglomerate and the grain boundaries become “tight,” and a more ductile condition results.

Type
Research Article
Copyright
Copyright © International Centre for Diffraction Data 1959

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

1 Craver, C. B., Aggen, G. N., and Dyrkacz, W. W., A Study of Precipitation Hardening of A-286 Alloy, Report H-0111-No. 8, Research Laboratories, Allegheny Ludlum Steel Corp., Watervliet, New York.Google Scholar
2 Beattie, H. J., Jr., and Hagel, W. C., “Intermetallic Compounds in Titanium Hardened Alloys,” Transactions AIME, J. of Metals, July, 1957, p. 911,Google Scholar
3 Kaufman, M. and Smeltzer, C. E., Jr., A Study of M308 and Super A-286-V-57, G.E. Report No. R58SE72.Google Scholar
4 Metcalfe, K., “Solve Lamellar Phase Problem in A-286,” Iron Age, July 3, 1958.Google Scholar
5 Radavich, J. F. and Pennington, W. J., The Occurrence of Carbides in Vacuum Melted Waspaloy (to be published).Google Scholar