Crossref Citations
This article has been cited by the following publications. This list is generated based on data provided by Crossref.
Dyson, I N
Williams, J A
and
Kapoor, A
1999.
The effect of surface hardening on the elastic shakedown of elliptical contacts.
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology,
Vol. 213,
Issue. 4,
p.
287.
Kalin, Mitjan
and
Vižintin, Jože
2000.
Thinning Films and Tribological Interfaces, Proceedings of the 26th Leeds-Lyon Symposium on Tribology.
Vol. 38,
Issue. ,
p.
533.
Roylance, B. J.
Williams, J. A.
and
Dwyer-Joyce, R
2000.
Wear debris and associated wear phenomena—fundamental research and practice.
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology,
Vol. 214,
Issue. 1,
p.
79.
Williams, John
and
Dwyer-Joyce, Rob
2000.
Modern Tribology Handbook, Two Volume Set.
Vol. 5,
Issue. ,
Straffelini, G.
Molinari, A.
and
Marcupuscas, T.
2000.
Identification of rolling-sliding damage mechanisms in porous alloys.
Metallurgical and Materials Transactions A,
Vol. 31,
Issue. 12,
p.
3091.
Straffelini, G.
and
Molinari, A.
2001.
Effect of hardness on rolling–sliding damage mechanisms in PM alloys.
Powder Metallurgy,
Vol. 44,
Issue. 4,
p.
344.
Kalin, Mitjan
and
Vižintin, Jože
2001.
Comparison of different theoretical models for flash temperature calculation under fretting conditions.
Tribology International,
Vol. 34,
Issue. 12,
p.
831.
Thompson, Scott C.
Pandit, Anjali
Padture, Nitin P.
and
Suresh, Subra
2002.
Stepwise‐Graded Si3N4–SiC Ceramics with Improved Wear Properties.
Journal of the American Ceramic Society,
Vol. 85,
Issue. 8,
p.
2059.
Yakimets, Iryna
Richard, Caroline
Béranger, Gérard
and
Peyre, Patrice
2004.
Laser peening processing effect on mechanical and tribological properties of rolling steel 100Cr6.
Wear,
Vol. 256,
Issue. 3-4,
p.
311.
Williams, J.A.
2004.
The Behaviour of Sliding Contacts Between Non-Conformal Rough Surfaces Protected by 'Smart' Films.
Tribology Letters,
Vol. 17,
Issue. 4,
p.
765.
Williams, John A.
2005.
Wear and wear particles—some fundamentals.
Tribology International,
Vol. 38,
Issue. 10,
p.
863.
Gao, Y.F.
Bower, A.F.
Kim, K.-S.
Lev, L.
and
Cheng, Y.T.
2006.
The behavior of an elastic–perfectly plastic sinusoidal surface under contact loading.
Wear,
Vol. 261,
Issue. 2,
p.
145.
Kadin, Y.
Kligerman, Y.
and
Etsion, I.
2006.
Multiple loading–unloading of an elastic–plastic spherical contact.
International Journal of Solids and Structures,
Vol. 43,
Issue. 22-23,
p.
7119.
Franklin, F.J.
Garnham, J.E.
Davis, C.L.
Fletcher, D.I.
and
Kapoor, A.
2009.
Wheel–Rail Interface Handbook.
p.
311.
Yin, Hang
and
Zhang, Guoping
2011.
Nanoindentation Behavior of Muscovite Subjected to Repeated Loading.
Journal of Nanomechanics and Micromechanics,
Vol. 1,
Issue. 2,
p.
72.
Yin, Hang
and
Zhang, Guoping
2011.
MEMS and Nanotechnology, Volume 4.
p.
83.
Smith, E. H.
and
Arnell, R. D.
2013.
A New Approach to the Calculation of Flash Temperatures in Dry, Sliding Contacts.
Tribology Letters,
Vol. 52,
Issue. 3,
p.
407.
Chatterjee, Biplab
and
Sahoo, Prasanta
2013.
Finite-Element-Based Multiple Normal Loading-Unloading of an Elastic-Plastic Spherical Stick Contact.
ISRN Tribology,
Vol. 2013,
Issue. ,
p.
1.
Ali, Murat
and
Mao, Ken
2013.
IAENG Transactions on Engineering Technologies.
Vol. 229,
Issue. ,
p.
171.
Smith, E. H.
and
Arnell, R. D.
2014.
The Prediction of Frictional Temperature Increases in Dry, Sliding Contacts Between Different Materials.
Tribology Letters,
Vol. 55,
Issue. 2,
p.
315.