Hostname: page-component-cd9895bd7-gxg78 Total loading time: 0 Render date: 2024-12-28T08:20:37.507Z Has data issue: false hasContentIssue false
  • English
  • Français

Robust road-to-car communications by means of an active Ku-band RF Self-IDentification (RFSID) system

Published online by Cambridge University Press:  19 August 2010

Luca Roselli ,
Valeria Palazzari ,
Federico Alimenti ,
Paolo Mezzanotte ,
Matteo Comez  and
Nicola Porzi
Luca Roselli
Affiliation:
Department of Electronic and Information Engineering, University of Perugia, via G. Duranti 93, I-06125 Perugia, Italy. Phone: +39-075-5853642; Fax: +39-075-5853654.
Valeria Palazzari
Affiliation:
Department of Electronic and Information Engineering, University of Perugia, via G. Duranti 93, I-06125 Perugia, Italy. Phone: +39-075-5853642; Fax: +39-075-5853654.
Federico Alimenti*
Affiliation:
Department of Electronic and Information Engineering, University of Perugia, via G. Duranti 93, I-06125 Perugia, Italy. Phone: +39-075-5853642; Fax: +39-075-5853654.
Paolo Mezzanotte
Affiliation:
Department of Electronic and Information Engineering, University of Perugia, via G. Duranti 93, I-06125 Perugia, Italy. Phone: +39-075-5853642; Fax: +39-075-5853654.
Matteo Comez
Affiliation:
Wireless Solutions S.r.l., via Vocabolo Pischiello 20, I-06065 Passignano sul Trasimeno (PG), Italy.
Nicola Porzi
Affiliation:
Wireless Solutions S.r.l., via Vocabolo Pischiello 20, I-06065 Passignano sul Trasimeno (PG), Italy.
*
Corresponding author: F. Alimenti Email: alimenti@diei.unipg.it
Get access Rights & Permissions [Opens in a new window]

Abstract

This paper deals with a robust RFSID (Radio Frequency Self IDentification) system for road-to-car communications. The RFSID-based system operates in Ku-band and consists of a fixed transmitter, located at the road side, and of a receiver unit placed on the moving target, i.e. a car in its first proposed application. A slotted waveguide antenna array is used to illuminate the moving object at the desired position, whereas a four-patch array antenna is adopted at the receiver side. Both the antennas have been designed using numerical simulations based on a Finite Difference Time Domain (FDTD) algorithm. When the moving object crosses the antenna beam a triggering pulse is generated by the receiver; such a pulse can be used to reset or update the electronics aboard the vehicle and to log specific information coming from location-based systems (LBSs), into the car equipments. A digital transmission of gold sequences and a post-processing unit have been exploited so far to increase the robustness and the accuracy of the system. At this stage of the development the system benefit of extensive field tests, being adopted for some years by many top Formula 1 racing teams as a lap trigger system, used to reset the on-board electronics when the car crosses either the finishing line and peculiar path reference points. The temporal accuracy exhibited is better than 1 ms with a coverage of about 90 m.

Keywords

RFIDRoad-to-car communicationsAutomotiveGold sequencesAntennasMicrowave
Type
Original Article
Information
International Journal of Microwave and Wireless Technologies , Volume 2 , Issue 2 , April 2010 , pp. 145 - 152
Copyright
Copyright © Cambridge University Press and the European Microwave Association 2010

Access options

Get access to the full version of this content by using one of the access options below. (Log in options will check for institutional or personal access. Content may require purchase if you do not have access.)

References

REFERENCES

[1]Finkenzeller, K.: RFID Handbook, Fundamentals and Applications in Contactless Smart Cards and Identification, 2nd ed., J. Wiley & Sons, Munich, Germany, 2003.Google Scholar
[2]Pursula, P. et al. : Millimeter-wave identification – a new short-range radio system for low-power high data-rate applications. IEEE Trans. Microwave Theory Tech., 56 (10) (2008), 2221–2228.Google Scholar
[3]Catarinucci, L.; Colella, R.; Tarricone, L.: A cost-effective UHF RFID tag for transmission of generic sensor data in wireless sensor networks. IEEE Trans. Microwave Theory Tech., 57 (5) (2009), 1291–1296.Google Scholar
[4]Basat, S.; Lim, K.; Kim, I.; Tentzeris, M.M.; Laskar, J.: Design and development of a miniaturized embedded UHF RFID tag for automotive tire applications, in Proc. 55th Electronic Components and Technology Conf., vol. 1, 2005, 867–870.Google Scholar
[5]Shaldover, S.E.: Authomatic vehicle control developments in the PATH program. IEEE Trans. Veh. Technol., 40 (1) (1991), 114–130.Google Scholar
[6]Roselli, L.; Alimenti, F.; Stopponi, G.; Porzi, N.: RF self-identification and triggering of fast moving objects, in Proc. IEEE 33rd European Microwave Conf. (EuMC 2003), vol. 3, 2003, 1215–1217.Google Scholar
[7]Alimenti, F.; Mezzanotte, P.; Palazzari, V.; Placentino, F.; Scarponi, A.; Roselli, L.: FDTD design of antennas for smart applications: RF triggering system case-of-study, in Proc. 7th Workshop on Computational Electromagnetic in Time Domain (CEM-TD 2007), Perugia, Italy, 2007.Google Scholar
[8]Roselli, L.; Palazzari, V.; Alimenti, F.; Mezzanotte, P.: A Ku-band RFID system for robust road-to-car communications, in Proc. 2009 IEEE MTT-S Int. Microwave Symp. (IMS 2009), Boston, MA, USA, June 2009, 1693–1696.Google Scholar
[9]Peterson, R.L. et al. : Introduction to Spread Spectrum Communications, Prentice-Hall, Englewood Cliffs, NJ, 1995.Google Scholar
[10]Elliot, R.S.: Antenna Theory and Design, Prentice-Hall, Englewood Cliffs, NJ, 1981.Google Scholar