X-ray superlattice reflections, infrared spectroscopy, and chemical analyses have established that cetylpyridinium bromide (CPB) is highly ordered when adsorbed on vermiculite. The molecules, which stand at about 57° to the silicate surface, form close-packed arrays. Full surface coverage is achieved only for the most highly charged vermiculites. The packing within the arrays accounted for the superlattice observed and each adsorbed molecule had an area of 18.4 Å2 at the surface. The implications of these findings for the CPB method used in soil surface area studies are discussed.

A laboratory study of cadmium exchangeability revealed large differences in extractable cadmium which are dependent on the exchange solution being utilized. The standard exchange solutions employed in this study were: N NaNO3, N NaOAc, N NH4OAc, NCaCl2, and 2N CaCl2, in order of increasing Cd removal. An interpretation of the chemical behavior of Cd and an experiment with mixed sodium nitrate and acetate solutions suggest that cadmium carbonate, octavite, was precipitated when the sediments were saturated with Cd prior to the exchange experiments and that the quantities of Cd recovered in the acetate solutions were erroneously high because of the dissolution of the carbonate material. Dissolution of solid phases, the lack of pH buffering, and the possible formation of a complex hydroxyl chloride salt also made the Cd values obtained with the chloride solutions too high. Sodium nitrate exchange solutions minimize these problems and are thought to best represent the exchangeable cadmium in the sediment.

The adsorption of Cu2+ on kaolinite was studied at different ionic strengths following various treatments of the mineral surface in order to evaluate the conditions influencing adsorption. The data indicate a strong preference of the Na+ exchange form of kaolinite for Cu2+ but a weak affinity of the natural kaolinite for Cu2+. Protons are generated by Cu2+ adsorption, a result of the exchange of surface protons, and possibly the enhancement of Cu2+ hydrolysis at the kaolinite surfaces. The exchange of Na+ by Cu2+ on the kaolinite is not described by the mass-action equation, but can be interpreted in terms of permanent charge sites on the surfaces when the additional factors of Na+-H3O+ exchange and blockage of sites by Al ions are considered.

Exchange reactions of Na-montmorillonite with zirconyl chloride solutions give products with basal spacings near 18 Å which are stable to 500°C and have surface areas of the order of 300–400 m2/g. The Na ions are exchanged with tetrameric hydroxy cations [Zr4(OH)14•nH2O]2+. The high surface area is attributed to the porosity formed by stable zirconium oxide “pillars” formed by dehydroxylation of the complex cation. The nitrogen adsorption isotherms are of Langmuir type and are consistent with adsorption in interlayer micropores. Reduced-charge montmorillonites, formed by application of the Hofmann-Klemen procedure, give either similar or slightly smaller surface areas.

The adsorption mechanism of iso-propylammonium (PAH+), the cationic component of Roundup, by various homoionic montmorillonites and the structures of the associations obtained in the interlayer space were investigated, using infrared, X-ray, and carbon analysis methods. Adsorption from aqueous and ethanol solutions of Roundup was studied. The infrared spectra were compared with those obtained by the treatment of montmorillonites with ethanol and CCl4 solutions of the free iso-propylamine (PA). The adsorption of PA from ethanol gives rise to protonation of the amine. PA sorbed from CCl4 solution forms an ammonium-amine association. Adsorption of PAH+ from alcohol solution of Roundup occurs by the mechanism of cation exchange. With transition metal exchangeable cations, PAH+ is sorbed in excess, forming hydrogen bonds between NH3+ groups and hydroxyls resulting from dissociation of water molecules. The process of adsorption of PAH+ from aqueous solutions of Roundup depends on the concentration of the solution. If montmorillonite is reacted with 0.5% solution of Roundup, PAH+ is adsorbed by exchanging metal cations and the adsorption capacity of the clay does not exceed the c.e.c. If the montmorillonite is reacted with 5.0% solution of Roundup, the PAH+ exchanges protons originating from the hydrolysis of the interlayer water. Protons which are transferred from the interlayer space to the water solution are accepted by the anion component of Roundup. The amounts of PAH+ adsorbed from concentrated Roundup solutions are much higher than the cation exchange capacity of montmorillonite. Hydrogen bonds are formed between the ammonium and water or hydroxyl groups on the interlayer space. With the trivalent exchange ions Al and Fe, which tend to polymerize in the interlayer space, excess sorption gives rise to hydrogen bonding of NH3+ to oxygen of the polymer.

The binding of tris-bipyridyl metal complexes of the type M(bp)32+ (M = Fe2+, Cu2+, Ru2+) to hectorite surfaces is shown to occur by two mechanisms. (1) replacement of Na+ ions in the native mineral by cation exchange up to its cation exchange capacity and (2) intersalation of excess salt beyond the exchange capacity. In the cation exchange mechanism, the binding of metal complex is strongly favored over Na+. The intersalation reactions are dependent on the nature of the counter-anion: SO42-, Br- > CIO4−, Cl−. The homoionic M(bp)32+-hectorites, which exhibit rational 18 Å X-ray reflections, have been characterized with regard to their BET surface areas, water adsorption isotherms, types of water present, selected reactions in the intercalated state, and orientation of the complex ions in the interlayer regions. Mixed Fe(bp)32+, Na+-hectorites have also been examined and the results suggest segregation of the two ions between interlayers or within interlayers. Solid state intersalated phases have been isolated with 18 Å and 29.5 Å spacings. In general, surface areas of the intersalated phases are low, but the 18 Å phase derived from [Fe(bp)3]SO4 adsorption shows a high surface area, which even exceeds the surface area of homoionic Fe(bp)32+-hectorite.

The exchange of various alkylammonium cations from aqueous solution by sodium laponite has been studied. The affinity of the clay for these organic cations was linearly related to the molecular weight, molecular size or chain length of the alkylammonium ions. The affinity for the clay increases regularly with increasing chain length of the primary amines. A comparison of primary, secondary, and tertiary amines, containing the same alkylgroups shows that the affinity increases in the order R1NH3+ < R2NH2+ < R3NH+. These affinity sequences were attributed to important van der Waals contributions and changes in ion hydration states. The thermodynamic excess function, ΔGmE, was calculated and indicated that with respect to the pure homoionic forms the heterogeneous Na+-alkylammonium surface phases were more stable than they would be if the mixing were ideal.

Alkylammonium ion exchange on mixed-layer minerals gives detailed information about the variation of cation density in succeeding interlayer spaces. Three mixed layer samples from Japan (supplied by Dr. H. Kodama) were investigated. Their nearly 1:1 interstratification is based on regularly alternating high- and low-charged interlayer spaces, which are caused by a regular sequence of polar layers. The cation density in the high-charged interlayer spaces is >0.8 eq/(Si, Al)4O10. The low-charged interlayer spaces have an average cation density of 0.4 eq/(Si, Al)4O10 and heterogeneous charge distribution. The kind of heterogeneity of the Goto Mine sample differs from that of the Yonago Mine and the Honami Mine samples.

The Goto Mine specimen has a rather regular sequence of the low- and high-charged interlayers in proportions close to 0.50:0.50. The other two samples contain interlayer spaces with pronounced unsymmetrical charge distribution. The Yonago Mine sample probably has in random distribution with the polar layers about 10% mica-like layers segregated to packets of three and more layers; the ratio of high-charged interlayers to the low-charged ones is increased to about 0.55:0.45. The Honami Mine sample probably contains isolated mica-like layers or pairs of them. The proportion of the high-charged interlayers is estimated to be about 0.53:0.47 and is lower than determined by Kodama from the glycerolated sample.

The samples investigated may be considered as end-members of a series of interstratified specimens which begins with smectites with mixed-layer like charge distribution.

The effect of pH, time and temperature on the interaction of zinc with acid and base saturated dickites has been investigated. Increase in pH resulted in an increase in adsorption of zinc in the higher concentration range. The adsorption increased rapidly and then slowly with increase in the time of interaction. The variation of rate constants and the half times of reaction suggested an exchange process controlled by film and possibly particle diffusion and thereafter fixation processes. The inferences found support from the nature of adsorption isotherms. Temperature affected adsorption with exothermic interactions. The activation energy of adsorption of zinc on Na-dickite was 14.0 kcal mole−1.

Structural Fe2+ in montmorillonite is readily oxidized by contact with water, salt solutions or on mild heating. This is shown clearly by the Mössbauer spectra and is associated with a sharpening of the infrared absorption near 880 cm−1. It was inferred that this band comprises the Fe2+—OH—Al and Fe3+—OH—Al deformations. The rate at which oxidation occurs depends on the exchangeable cations. High acidity of the interlayers is conducive to oxidation, as is contact with Cu2+-containing solutions or concentrated H2O2 solutions.

The results show clearly that any chemical treatment of montmorillonite causes changes in the oxidation state of structural iron.

Treating NH4-bentonite with diazomethane results in methylation of adsorbed ammonium with the formation of the tetramethylammonium ion. This ion, which can be completely removed through ion exchange, is distinguished in the IR spectrum by a strong band at 1480 cm−1 due to CH3 group bending vibrations. X-ray diffractograms, CEC, and surface area of the clay are not modified by treatment with diazomethane.

Nephelometric (light scattering) methods for the determination of Ca and Ba in the 0–30 ppm range, and their application to the estimation of the cation exchange capacity (±10%) of small (≤30 mg) samples of clay minerals, are described and evaluated.