The phase summation effect in sum-frequency mixing process is utilized to avoid a nonlinearity obstacle in the power scaling of single-frequency visible or ultraviolet lasers. Two single-frequency fundamental lasers are spectrally broadened by phase modulation to suppress stimulated Brillouin scattering in fiber amplifier and achieve higher power. After sum-frequency mixing in a nonlinear optical crystal, the upconverted laser returns to single frequency due to phase summation, when the phase modulations on two fundamental lasers have a similar amplitude but opposite sign. The method was experimentally proved in a Raman fiber amplifier-based laser system, which generated a power-scalable sideband-free single-frequency 590 nm laser. The proposal manifests the importance of phase operation in wave-mixing processes for precision laser technology.

High-power continuous-wave single-frequency Er-doped fiber amplifiers at 1560 nm by in-band and core pumping of a 1480 nm Raman fiber laser are investigated in detail. Both co- and counter-pumping configurations are studied experimentally. Up to 59.1 W output and 90% efficiency were obtained in the fundamental mode and linear polarization in the co-pumped case, while less power and efficiency were achieved in the counter-pumped setup for additional loss. The amplifier performs indistinguishably in terms of laser linewidth and relative intensity noise in the frequency range up to 10 MHz for both configurations. However, the spectral pedestal is raised in co-pumping, caused by cross-phase modulation between the pump and signal laser, which is observed and analyzed for the first time. Nevertheless, the spectral pedestal is 34.9 dB below the peak, which has a negligible effect for most applications.