We investigate experimentally and theoretically the interactions between a cavitation bubble and a hemispherical pendant oil droplet immersed in water. In experiments, the cavitation bubble is generated by a focused laser pulse right below the pendant droplet with well-controlled bubble–wall distances and bubble–droplet size ratios. By high-speed imaging, four typical interactions are observed, namely: oil droplet rupture; water droplet entrapment; oil droplet large deformation; and oil droplet mild deformation. The bubble jetting at the end of collapse and the migration of the bubble centroid are particularly different in each bubble–droplet interaction. We propose theoretical models based on the method of images for calculating the Kelvin impulse and the anisotropy parameter which quantitatively reflects the migration of the bubble centroid at the end of the collapse. Finally, we explain that a combination of the Weber number and the anisotropy parameter determines the regimes of the bubble–droplet interactions.

The hog deer Axis porcinus formerly occurred in south-west China but has not been recorded there since 1965. To investigate the current status of the species in China, we conducted interviews, and transect and camera-trap surveys during October 2018–June 2020 to search for signs of hog deer across its historical range in the country. We interviewed 50 local inhabitants and surveyed 14 line transects in four counties of Lincang City, Yunnan Province. The camera traps were deployed in Nangunhe Nature Reserve (39.4 km of transects, 82 camera stations, 15,120 camera days) and Daxueshan Nature Reserve (41.1 km of transects, 68 camera stations, 13,554 camera days). We found no hog deer tracks and no hog deer were trapped by cameras. The floodplain grasslands preferred by hog deer along Nanting River have been transformed into agriculture plantations and human settlements. Our findings suggest that hog deer may have been extirpated from China, most likely as a result of habitat loss and overhunting. The conservation priorities for this species in China are the establishment of a protected area in the Nanting River watershed, restoration of habitat and reintroduction of individuals from range countries.

Shock-tube experiments on eight kinds of two-dimensional multi-mode air–SF$_6$ interface with controllable initial conditions are performed to examine the dependence of perturbation growth on initial spectra. We deduce and demonstrate experimentally that the amplitude development of each mode is influenced by the mode-competition effect from quasi-linear stages. It is confirmed that the mode-competition effect is closely related to initial spectra, including the wavenumber, the phase and the initial amplitude of constituent modes. By considering both the mode-competition effect and the high-order harmonics effect, a nonlinear model is established based on initial spectra to predict the amplitude growth of each individual mode. The nonlinear model is validated by the present experiments and data in the literature by considering diverse initial spectra, shock intensities and density ratios. Moreover, the nonlinear model is successfully extended based on the superposition principle to predict the growths of the total perturbation width and the bubble/spike width from quasi-linear to nonlinear stages.

The control of dynamic spatial posture for cantilever roadheader is one of the vital problems for intelligent mining, which directly affect the forming quality of cutting tunnel. Therefore, this paper proposed an intelligent optimal combination compensation strategy to adjust the real-time dynamic posture of cantilever roadheader. First, based on the topological structure analysis of cantilever roadheader, the structural loop compensation model for spatial posture deviation was established. Afterward, the principal component analysis (PCA) and multi-objective particle swarm optimization (MPSO) algorithm were applied to improve the analysis speed and accuracy of posture deviation. Finally, parallel dynamic cooperative optimization (PDCO) strategy was combined to achieve the accurate adjusting of posture deviation. The actual experimental and application results indicate that the intelligent optimal combination compensation strategy proposed in the paper can significantly improve the accuracy of the cutting tunnel. The intelligent optimal compensation strategy proposed in this paper transforms the transient spatial posture deviation into structural loop compensation, and implements by parallel cooperative strategy, finally to realize the fast analysis and efficient implementation of spatial dynamic posture deviation for cantilever roadheader during cutting process. The work of this paper provides an effective reference for intelligent deep and remote underground mining, and it can also be applied to effective control of dynamic spatial posture for intelligent engineering machinery products.

Extreme cavitation scenarios, such as water column separations in hydraulic systems during transient processes caused by large cavitation bubbles, can lead to catastrophic destruction. In the present paper, we study the onset criteria and dynamics of large cavitation bubbles in a tube. A new cavitation number $Ca_2 = {l^*}^{-1} Ca_0$ is proposed to describe the maximum length $L_{max}$ of the cavitation bubble, where $l^*$ is a non-dimensional length of the water column indicating its slenderness, and $Ca_0$ is the classic cavitation number. Combined with the onset criteria for acceleration-induced cavitation ($Ca_1<1$, Pan et al., Proc. Natl Acad. Sci. USA, vol. 114, 2017, pp. 8470–8474), we show that the occurrence of large cylindrical cavitation bubbles requires both $Ca_2<1$ and $Ca_1<1$ simultaneously. We also establish a Rayleigh-type model for the dynamics of large cavitation bubbles in a tube. The bubbles collapse at a finite end speed, and the time from the maximum bubble size to collapse is $T_c=\sqrt {2}\sqrt {lL_{max}}\sqrt {{\rho }/{p_\infty }}$, where $l$ is the length of the water column, $L_{max}$ is the maximum bubble length, $\rho$ is the liquid density and $p_{\infty }$ is the reference pressure in the far field. The analytical results are validated against systematic experiments using a modified ‘tube-arrest’ apparatus, which can decouple acceleration and velocity. The results in the current work can guide design and operation of hydraulic systems encountering transient processes.

In this paper, we report the study of degradation for a kind of ideal mandrel material called poly-α-methylstyrene based on theoretical and experimental methods. First-principles calculations reveal two types of process: depolymerization and hydrogen-transfer-induced chain scission. The energy barrier for the former (0.68–0.82 eV) is smaller than that for most of the latter (1.39–4.23 eV). More importantly, reaction rates suggest that the former is fast whereas the latter is mostly slow, which can result in a difference of 5–31 orders of magnitude at 550 K. Furthermore, a thermogravimetric experiment shows that the activation energy of 2.53 eV for degradation is between those of fast and slow processes, corresponding to the theoretical average value of multiple reaction paths. Thus, a mandrel degradation model combining fast and slow processes is established at the atomic level. Our work provides a direction for research into the key technology of target fabrication in inertial confinement fusion.

Interception by plant canopies during wind dispersal can affect the final destination of diaspores. However, how the interaction of wind speed, canopy type and diaspore attributes affects interception of diaspores by the plant canopy has rarely been studied. We investigated canopy interception for 29 species with different diaspore attributes, six canopy types and six wind speeds in controlled experiments in a wind tunnel. Shrub canopy interception of diaspores were controlled by wind speed and diaspore attributes, but the latter had a greater influence on canopy interception than the former. At low wind speed, diaspore wing loading had a large influence on canopy interception, whereas at high wind speed, diaspore projection area had a large influence. The chance of canopy interception at a particular wind speed was additionally affected by the type of canopy. This study increases our knowledge of the dispersal process, corrects the previous understanding of diaspore dispersal potential and improves the theoretical basis for predicting spatial pattern and dynamics of plant populations.

We report the first experiments on divergent shock-driven Richtmyer–Meshkov instability (RMI) at well-controlled single-mode interfaces. These experiments are performed in a novel divergent shock tube designed by shock dynamics theory. Generally, the perturbation growth can be divided into three successive stages: linear growth, quick reduction in growth rate and instability freeze-out. It is observed that the growth rate at each stage is far lower than its counterpart in planar or convergent geometry due to geometric divergence. We also found that nonlinearity is much weaker than that in planar or convergent RMI, and has a negligible influence on the overall amplitude growth even at late stages when it has become strong. This weak nonlinear effect is because the growth of the third harmonic counteracts its feedback to the fundamental mode. As a consequence, the linear theory of Bell (report no. LA-1321) accounting for geometric divergence and Rayleigh–Taylor (RT) stabilization caused by flow deceleration can reasonably predict the present results from early to late stages. The instability freeze-out at late times is ascribed to the negative growth induced by geometric divergence and RT stabilization, and is also well reproduced by the linear theory.

Richtmyer–Meshkov instability of the SF6 gas layer surrounded by air is experimentally investigated. Using the soap film technique, five kinds of gas layer with two sharp interfaces are generated such that the development of each individual interface is highlighted. The flow patterns are determined by the amplitudes and phases of two corrugated interfaces. For a layer with both interfaces planar, the interface velocity shows that the reflected rarefaction waves from the second interface accelerate the first interface motion. For a layer with the second interface corrugated but the first interface planar, the reflected rarefaction waves make the first interface develop with the same phase as the second interface. For a layer with the first interface corrugated but the second interface planar, the rippled shock seeded from the first interface makes the second interface develop with the same phase as the first interface and the layer evolves into an ‘upstream mushroom’ shape. For two interfaces corrugated with opposite (the same) phase but a larger amplitude for the first interface, the layer evolves into ‘sinuous’ shape (‘bow and arrow’ shape, which has never been observed previously). For the interface amplitude growth in the linear stage, the waves’ effects are considered in the model to give a better prediction. In the nonlinear stage, the effect of the rarefaction waves on the first interface evolution is quantitatively evaluated, and the nonlinear growth is well predicted. It is the first time in experiments to quantify the interfacial instability induced by the rarefaction waves inside the heavy gas layer.

The authors design six alumina hybrid structures consisting of stretching-dominated plates and different space-filling lattices comprised of hollow tubes and perform finite element simulations to study mechanical and failure behaviors of such hybrid structures. The authors investigate the effects of three geometrical parameters on the stiffness and failure of these hybrid structures and further compare their advantages and disadvantages. The authors find that the failure modes of these hybrid structures can be tuned by altering cell unit type and geometrical parameters. Among these hybrid structures, the ones with effective support from the lattice unit cells in the stretching direction exhibit better specific stiffness and strength. By varying the lattice and plate thickness, the authors find that the relations between stiffness/failure strength and density follow a power law. When intrinsic material failure occurs, the power law exponent is 1; when buckling failure arises, the power law exponent is 3. However, by varying tube thickness, their relations follow unusual power relations with the exponent changing from nearly 0 to nearly infinity. In addition, the hybrid structures also exhibit defect insensitivity. This study shows that such hybrid structures are able to greatly expand the design space of architectured cellular materials for engineering applications.

In inertial confinement fusion experiments that involve short-laser pulses such as fast ignition (FI), diagnosis of neutrons is usually very challenging because high-intensity γ rays generated by short-laser pulses would mask the much weaker neutron signal. In this paper, fast-response scintillators with low afterglow and gated microchannel plate photomultiplier tubes are combined to build neutron time-of-flight (nTOF) spectrometers for such experiments. Direct-drive implosion experiments of deuterium-gas-filled capsules were performed at the Shenguang-II Upgrade (SG-II-UP) laser facility to study the compressed fuel areal density (〈ρR〉) and evaluate the performance of such nTOF diagnostics. Two newly developed quenched liquid scintillator detectors and a gated ultrafast plastic scintillator detector were used to measure the secondary DT neutrons and primary DD neutrons, respectively. The secondary neutron signals were clearly discriminated from the γ rays from (n, γ) reactions, and the compressed fuel areal density obtained with the yield-ratio method agrees well with the simulations. Additionally, a small scintillator decay tail and a clear DD neutron signal were observed in an integrated FI experiment as a result of the low afterglow of the oxygen-quenched liquid scintillator.

In this paper, we review the status of the multifunctional experimental platform at the National Laboratory of High Power Laser and Physics (NLHPLP). The platform, including the SG-II laser facility, SG-II 9th beam, SG-II upgrade (SG-II UP) facility, and SG-II 5 PW facility, is operational and available for interested scientists studying inertial confinement fusion (ICF) and a broad range of high-energy-density physics. These facilities can provide important experimental capabilities by combining different pulse widths of nanosecond, picosecond, and femtosecond scales. In addition, the SG-II UP facility, consisting of a single petawatt system and an eight-beam nanosecond system, is introduced including several laser technologies that have been developed to ensure the performance of the facility. Recent developments of the SG-II 5 PW facility are also presented.

Chinese jiaotou is an economically important crop that is widely cultivated in East Asia. The lack of simple sequence repeat (SSR) markers has been a major obstacle for genetic studies of this crop. In the present study, SSR markers were developed for Chinese jiaotou on a large scale, based on the crop's transcriptome assembled de novo by a previous study. A search for SSR loci in the transcriptome's expressed sequence tags (ESTs) revealed 2157 SSRs, of which primer pairs could be developed for 1494. Among these resulting SSRs, trinucleotide repeat motifs were the most abundant type, with GAA/TTC motifs occurring most frequently. Analysing the annotated function of SSR-containing ESTs revealed that they enriched into the GO categories involved in transcription regulation, oxidation–reduction, transport, etc. The quality and transferability of these markers were also assessed using 100 randomly selected EST–SSRs, and the result showed that these markers were of good quality and possessed high cross-species transferability. In addition, the developed SSR markers were used to analyse the genetic diversity of 19 cultivated and four wild accessions, resulting in three distinct groups, cluster I, II and III. Interestingly, all four wild accessions were assigned to cluster III, and two local varieties from northern Hunan, China, were closely related to the wild genotypes. These results provide new insights into the origin of Chinese jiaotou. The EST–SSRs developed herein represent the first large-scale development of SSR markers in Chinese jiaotou, and they can be widely used for genetic studies of the crop.

The objective of maintaining the cleanliness of the multi-segment disk amplifier in Shenguang-II (SG-II) is to reduce laser-induced damage for optics. The flow field of clean gas, which is used for the transportation of contaminant particles, is a key factor affecting the cleanliness level in the multi-segment disk amplifier. We developed a gas–solid coupling and three-dimensional flow numerical simulation model. The three-dimensional and two-phase flow model is verified by the flow-field smog experiment and the particle concentration measurement experiment with the 130-disk amplifier in SG-II. By optimizing the boundary conditions with the same flow rate, the multi-inlet vector flow scheme can not only effectively reduce the purging time, but also prevent the reverse diffusion of contaminant particles in the multi-segment disk amplifier and the deposition of contaminant particles on the surface of the Nd:glass.

Carbon nanodots (CDs) have generated enormous excitement because of their superiority in water solubility, chemical inertness, low toxicity, ease of functionalization and resistance to photobleaching. Here we report a facile thermal pyrolysis route to prepare CDs with high quantum yield (QY) using citric acid as the carbon source and ethylene diamine derivatives (EDAs) including triethylenetetramine (TETA), tetraethylenepentamine (TEPA) and polyene polyamine (PEPA) as the passivation agents. We find that the CDs prepared from EDAs, such as TETA, TEPA and PEPA, show relatively high photoluminescence (PL) QY (11.4, 10.6, and 9.8%, respectively) at λex of 465 nm. The cytotoxicity of the CDs has been investigated through in vitro and in vivo bio-imaging studies. The results indicate that these CDs possess low toxicity and good biocompatibility. The unique properties such as the high PL QY at large excitation wave length and the low toxicity of the resulting CDs make them promising fluorescent nanoprobes for applications in optical bio-imaging and biosensing.

The aim of the present study was to investigate the effects of different dietary sustained-release microencapsulated sodium butyrate (MSB) products (0 (non-supplement), 1·5 and 3·0 h) for a control or oxidised soyabean oil (SBO) diet on fish production, intestinal mucosal condition, immunity and intestinal bacteria in juvenile common carp (Cyprinus carpio). Dietary MSB increased weight gain and reduced the feed conversion ratio within the control and oxidised SBO groups. Gut mucosa was damaged in the oxidised SBO group fed without MSB, in contrast to a normal appearance found in fish fed the MSB1·5 and MSB3·0 diets in the oxidised SBO group. Microvillus density increased in fish fed the MSB1·5 and MSB3·0 diets in the oxidised SBO group (P< 0·001); however, microvillus density was affected by the different pre-fed diets in the midgut (P< 0·001) and by the different sustained-release times of MSB in the distal gut (DG) (P= 0·003). The interaction between the pre-fed diets and the sustained-release times of dietary MSB was significant for the relative gene expression levels of gut heat shock protein-70 (HSP70), pro-inflammatory cytokines (IL-1β and TNF-α) and anti-inflammatory cytokines (transforming growth factor-β) within each gut segment, except for HSP70 in the DG and IL-1β in the foregut. Modulation of adherent bacterial communities within each gut segment investigated was not obvious when the common carp were fed the diets with MSB, as similarity coefficients of >0·79 were observed. These results indicated that MSB can be used as a dietary supplement to repair or prevent intestinal damage in carp fed oxidised SBO.

A facile inexpensive route has been developed to prepare ZnO hierarchical materials with microplate/nanohole structures based on the colloidal monolayer template by the precursor thermal decomposition. These hierarchical structured materials demonstrated an excellent superhydrophobicity with self-cleaning effect and an enhanced photocatalytic performance to organic molecules, which are attributed to big roughness and large surface area of such special hierarchical structures. The formation mechanism of such hierarchical structures was investigated in detail by tracing morphology changing at different precursor concentrations. At high precursor concentration, both incompletely restricted ZnO growth of colloidal templates and preferable growth of microplates take place at the same time, and hence, ZnO hierarchical materials with microplate/nanohole structures are formed. With increasing precursor concentration, the number density of ZnO microplates tends to be larger. The large number density of ZnO microplates and holes on the microplates render the sample a large surface area and surface roughness, leading to good superhydrophobicity and photocatalytic activity. Such hierarchical ZnO micro/nanostructured materials have important applications in environmental science, microfluidic devices, etc.

Grain boundary engineering (GBE) has been carried out in nickel-based Alloy 690 with different initial grain sizes. The microstructure evolution during GBE-processing is characterized using electron backscatter diffraction to study the initial grain size effects on the grain boundary network (GBN). The microstructures of the partially recrystallized samples revealed that the GBE-processing is a strain-recrystallization process, during which each grain-cluster is formed by “multiple twinning” starting from a single recrystallization nucleus. Taking into consideration the coincidence site lattices (CSLs) and ∑, which is defined as the reciprocal density of coincidence sites, a high proportion of low-∑ CSL grain boundaries (GBs) and large grain-clusters are found to be the features of GBE-processed GBN. The initial grain size has a combined effect on the low-∑ CSL GBs proportion. A large initial grain size reduces the number of recrystallization nuclei that form, increasing the cluster size, but decreasing twin boundary density. On the other hand, smaller initial grain sizes increase the density of twin boundary after recrystallization, while decreasing grain-cluster size. Neither the grain-cluster size nor the twin boundary density is the sole factor influencing the proportion of low-∑ CSL GBs. The ratio of the grain cluster size over the grain size governs the proportion of low-∑ CSL GBs.

Beam positioning stability in a laser-driven inertial confinement fusion (ICF) facility is a vital problem that needs to be fixed. Each laser beam in the facility is transmitted in lots of optics for hundreds of meters, and then targeted in a micro-sized pellet to realize controllable fusion. Any turbulence in the environment in such long-distance propagation would affect the displacement of optics and further result in beam focusing and positioning errors. This study concluded that the errors on each of the optics contributed to the target, and it presents an efficient method of enhancing the beam stability by eliminating errors on error-sensitive optics. Optimizations of the optical system and mechanical supporting structures are also presented.