Sugarcane brown rust, caused by Puccinia melanocephala, is one of the main diseases of sugarcane in China. The identification and discovery of new resistance genes have important theoretical and practical significance for preventing outbreaks of brown rust and ensuring the sustainable production of sugarcane. To screen for polymorphic simple-sequence repeat (SSR) molecular markers for localization of brown rust resistance genes, we used two populations that are suitable for genetic linkage map construction and mapping of new resistance genes to construct resistant and susceptible genetic pools. We then screened 449 pairs of primers to identify polymorphic SSR markers in the parental lines and the resistant/susceptible genetic pools. The results showed that 25 pairs of primers directed amplification of polymorphic DNA fragments between the parents of the cross combination ‘Yuetang 03-393’ × ‘ROC 24’, and 16 pairs of primers amplified polymorphic fragments between the parents of the cross combination ‘Liucheng 03-1137’ × ‘Dezhe 93-88’. Four pairs of primers (SMC236CG, SCESSR0928, SCESSR0636 and SCESSR2551) amplified polymorphic DNA fragments between the parental lines and the resistant/susceptible genetic pools in ‘Yuetang 03-393’ × ‘ROC 24’. The results of this study will establish a solid foundation for the mapping of new brown rust resistance genes, genetic linkage map construction and the development of closely-associated molecular markers in sugarcane.

We assessed inheritance of resistance to sugarcane brown rust (Puccinia melanocephala) in selfing F1 populations of wild sugarcane germplasm Erianthus rockii ‘Yundian 95-19’ and E. rockii ‘Yundian 95-20’. We tested parent and selfing F1 individuals for the brown rust resistance gene, Bru1, that has been shown to confer resistance to brown rust in sugarcane. The Bru1 gene was not detected in E. rockii ‘Yundian 95-19’, E. rockii ‘Yundian 95-20’ or their selfing F1 individuals, and we found there was segregation of resistance in the two selfing F1 populations (segregation ratio: 3:1). The results confirmed resistance in E. rockii ‘Yundian 95-19’ and E. rockii ‘Yundian 95-20’ to sugarcane brown rust is controlled by a novel, single dominant gene.

Few studies have examined the association of various types of Fe with colorectal cancer risk. The aim of this study was to investigate different forms and sources of Fe in relation to colorectal cancer risk in a Chinese population. A total of 2138 patients with colorectal cancer and 2144 sex- and age-matched (5-year interval) controls were recruited from July 2010 to November 2017. Dietary information was assessed by face-to-face interviews using a validated FFQ. Multivariable logistic regression was used to estimate the OR and 95 % CI on models. Intake of Fe from plants and Fe from white meat were inversely associated with the risk of colorectal cancer, while haem Fe and Fe from red meat were positively associated with colorectal cancer risk. The multivariable OR for the highest quartile v. the lowest quartile were 0·72 (95 % CI 0·59, 0·87, Ptrend<0·001) for Fe from plants, 0·54 (95 % CI 0·45, 0·66, Ptrend<0·001) for Fe from white meat, 1·26 (95 % CI 1·04, 1·53, Ptrend=0·005) for haem Fe and 1·83 (95 % CI 1·49, 2·24, Ptrend<0·001) for Fe from red meat intake, respectively. However, no significant association was found between the consumption of total dietary Fe, non-haem Fe, Fe from meat and colorectal cancer risk. This study showed that lower intake of Fe from plants and white meat, as well as higher intake of haem Fe and Fe from red meat, were associated with colorectal cancer risk in a Chinese population.

This paper presents new LA-ICP-MS zircon U–Pb chronology, whole-rock geochemical and zircon Hf isotopic data for the felsic lavas of the Huili Group from the southwestern Yangtze Block. LA-ICP-MS zircon U–Pb dating shows that these rocks were emplaced in Late Mesoproterozoic time (∼1028 to 1019 Ma). Relative to typical I-type and S-type granitoids, all the samples are characterized by low Sr and Eu, and high high-field-strength element contents, high TFeO/MgO, enriched rare earth element compositions and negative Eu anomalies, indicating that they share the geochemical signatures of A-type granitoid. They can be further divided into two groups: Group I and Group II. Group I are A1-type felsic rocks and were produced by fractional crystallization of alkaline basaltic magmas. The Group II felsic lavas belong to the A2-type and were derived by partial melting of a crustal source with mixing of mantle-derived magmas. Both Group I and Group II felsic lavas may erupt in a continental back-arc setting. The coexistence of A1- and A2-type rocks in the southwestern Yangtze Block suggests that they can occur in the same tectonic setting.

A carbohydrate-rich diet results in hyperglycaemia and hyperinsulinaemia; it may further induce the carcinogenesis of colorectal cancer. However, epidemiological evidence among Chinese population is quite limited. The aim of this study was to investigate total carbohydrate, non-fibre carbohydrate, total fibre, starch, dietary glycaemic index (GI) and glycaemic load (GL) in relation to colorectal cancer risk in Chinese population. A case–control study was conducted from July 2010 to April 2017, recruiting 1944 eligible colorectal cancer cases and 2027 age (5-year interval) and sex frequency-matched controls. Dietary information was collected by using a validated FFQ. The OR and 95 % CI of colorectal cancer risk were assessed by multivariable logistic regression models. There was no clear association between total carbohydrate intake and colorectal cancer risk. The adjusted OR was 0·85 (95 % CI 0·70, 1·03, Ptrend=0·08) comparing the highest with the lowest quartile. Total fibre was related to a 53 % reduction in colorectal cancer risk (adjusted ORquartile 4 v. 1 0·47; 95 % CI 0·39, 0·58). However, dietary GI was positively associated with colorectal cancer risk, with an adjusted ORquartile 4 v. 1 of 3·10 (95 % CI 2·51, 3·85). No significant association was found between the intakes of non-fibre carbohydrate, starch and dietary GL and colorectal cancer risk. This study indicated that dietary GI was positively associated with colorectal cancer risk, but no evidence supported that total carbohydrate, non-fibre carbohydrate, starch or high dietary GL intake were related to an increased risk of colorectal cancer in a Chinese population.

Ecological evidence suggests that niacin (nicotinamide and nicotinic acid) fortification may be involved in the increased prevalence of obesity and type 2 diabetes, both of which are associated with insulin resistance and epigenetic changes. The purpose of the present study was to investigate nicotinamide-induced metabolic changes and their relationship with possible epigenetic changes. Male rats (5 weeks old) were fed with a basal diet (control group) or diets supplemented with 1 or 4 g/kg of nicotinamide for 8 weeks. Low-dose nicotinamide exposure increased weight gain, but high-dose one did not. The nicotinamide-treated rats had higher hepatic and renal levels of 8-hydroxy-2′-deoxyguanosine, a marker of DNA damage, and impaired glucose tolerance and insulin sensitivity when compared with the control rats. Nicotinamide supplementation increased the plasma levels of nicotinamide, N1-methylnicotinamide and choline and decreased the levels of betaine, which is associated with a decrease in global hepatic DNA methylation and uracil content in DNA. Nicotinamide had gene-specific effects on the methylation of CpG sites within the promoters and the expression of hepatic genes tested that are responsible for methyl transfer reactions (nicotinamide N-methyltransferase and DNA methyltransferase 1), for homocysteine metabolism (betaine–homocysteine S-methyltransferase, methionine synthase and cystathionine β-synthase) and for oxidative defence (catalase and tumour protein p53). It is concluded that nicotinamide-induced oxidative tissue injury, insulin resistance and disturbed methyl metabolism can lead to epigenetic changes. The present study suggests that long-term high nicotinamide intake (e.g. induced by niacin fortification) may be a risk factor for methylation- and insulin resistance-related metabolic abnormalities.

Several problems of practical interest in robotics can be modelled as the convolution of functions on the Euclidean motion group. These include the evaluation of reachable positions and orientations at the distal end of a robot manipulator arm. A natural inverse problem arises when one wishes to design rather than to model manipulators. Namely, by considering a serial-chain robot arm as a concatenation of segments, we examine how statistics of known segments can be used to select, or design, the remainder of the structure so as to attain the desired statistical properties of the whole structure. This is then a deconvolution density estimation problem for the Euclidean motion group. We prove several results about the convergence of these deconvolution estimators to the true underlying density under certain smoothness assumptions. A practical implementation to the design of planar robot arms is demonstrated.

Piezoelectric properties k33 and d33 of 0.67 Pb(Mg1/3Nb2/3)O3–0.33 PbTiO3 single crystals grown by a modified Bridgman method were measured in the temperature range of 20–150 °C. Recoverability of the properties after the samples were heated to 110 °C, above the ferroelectric–ferroelectric (F–F) phase transition temperature of the composition, was found. From 20 to approximately 80 °C, k33 increases slightly, while d33 is almost doubled. Between approximately 90 and 100 °C, k33 decreases sharply to roughly a level of PZT-5 ceramics and d33 decreases to about 700 pC/N. They increase again with further increase of temperature; at 140 °C they attain 0.74 and approximately 1300 pC/N, respectively, and then decrease quickly and approach zero at about 150 °C. When heating to 110 °C followed by cooling to room temperature, the property decay is small. After more than one dozen heating–cooling cycles, k33 and d33 tend to be stable at 0.89 and approximately 1220 pC/N, respectively. The results might be helpful for device design and applications of PMN–PT single crystals.