Polydatin is an active polyphenol displaying multifaceted benefits. Recently, growing studies have noticed its potential therapeutic effects on bone and joint disorders (BJDs). Therefore, this article reviews recent in vivo and in vitro progress on the protective role of polydatin against BJDs. An insight into the underlying mechanisms is also presented. It was found that polydatin could promote osteogenesis in vitro, and symptom improvements have been disclosed with animal models of osteoporosis, osteosarcoma, osteoarthritis and rheumatic arthritis. These beneficial effects obtained in laboratory could be mainly attributed to the bone metabolism-regulating, anti-inflammatory, antioxidative, apoptosis-regulating and autophagy-regulating functions of polydatin. However, studies on human subjects with BJDs that can lead to early identification of the clinical efficacy and adverse effects of polydatin have not been reported yet. Accordingly, this review serves as a starting point for pursuing clinical trials. Additionally, future emphasis should also be devoted to the low bioavailability and prompt metabolism nature of polydatin. In summary, well-designed clinical trials of polydatin in patients with BJD are in demand, and its pharmacokinetic nature must be taken into account.

Without rapid international action to curb greenhouse gas emissions, climate scientists have predicted catastrophic sea-level rise by 2100. Globally, archaeologists are documenting the effects of sea-level rise on coastal cultural heritage. Here, the authors model the impact of 1m, 2m and 5m sea-level rise on China's coastal archaeological sites using data from the Atlas of Chinese Cultural Relics and Shanghai City's Third National Survey of Cultural Relics. Although the resulting number of endangered sites is large, the authors argue that these represent only a fraction of those actually at risk, and they issue a call to mitigate the direct and indirect effects of rising sea levels.

In this paper, CNTs reinforced foam aluminum matrix composites with small pore diameter were prepared by powder metallurgy method. When the mass fraction of CNTs was 0.75%, the tensile strength, flexural strength and compressive yield strength of the materials were 3.4 times, 2.4 times and 2.4 times of pure foam aluminum, respectively, reaching the maximum value, which obviously improved the mechanical properties of aluminum foam. The tensile property model of foam aluminum matrix composites was built to predict the properties of the composites, and the effects of defects and reinforcement on the mechanical properties of the composites were compared. The results show that the tensile fitting is consistent with the measured results when the mass fraction of CNTs is less than 0.75%, but the weakening effect of defects on the strength of aluminum foam is much greater than the enhancement of CNTs. With the increase of CNTs mass fraction, the damping loss factor of foam aluminum composites increases, dislocation damping and grain boundary damping play a role in advance, and the damping peak moves to the low temperature region.

l-Carnitine is essential for mitochondrial β-oxidation and has been used as a lipid-lowering feed additive in humans and farmed animals. d-Carnitine is an optical isomer of l-carnitine and dl-carnitine has been widely used in animal feeds. However, the functional differences between l- and d-carnitine are difficult to study because of the endogenous l-carnitine background. In the present study, we developed a low-carnitine Nile tilapia model by treating fish with a carnitine synthesis inhibitor, and used this model to investigate the functional differences between l- and d-carnitine in nutrient metabolism in fish. l- or d-carnitine (0·4 g/kg diet) was fed to the low-carnitine tilapia for 6 weeks. l-Carnitine feeding increased the acyl-carnitine concentration from 3522 to 10 822 ng/g and alleviated the lipid deposition from 15·89 to 11·97 % in the liver of low-carnitine tilapia. However, as compared with l-carnitine group, d-carnitine feeding reduced the acyl-carnitine concentration from 10 822 to 5482 ng/g, and increased lipid deposition from 11·97 to 20·21 % and the mRNA expression of the genes involved in β-oxidation and detoxification in the liver. d-Carnitine feeding also induced hepatic inflammation, oxidative stress and apoptosis. A metabolomic investigation further showed that d-carnitine feeding increased glycolysis, protein metabolism and activity of the tricarboxylic acid cycle and oxidative phosphorylation. Thus, l-carnitine can be physiologically utilised in fish, whereas d-carnitine is metabolised as a xenobiotic and induces lipotoxicity. d-Carnitine-fed fish demonstrates increases in peroxisomal β-oxidation, glycolysis and amino acid degradation to maintain energy homeostasis. Therefore, d-carnitine is not recommended for use in farmed animals.

Novel NiMoO4-integrated electrode materials were successfully prepared by solvothermal method using Na2MoO4·2H2O and NiSO4·6H2O as main raw materials, water, and ethanol as solvents. The morphology, phase, and structure of the as-prepared materials were characterized by SEM, XRD, Raman, and FT-IR. The electrochemical properties of the materials in supercapacitors were investigated by cyclic voltammetry, constant current charge–discharge, and electrochemical impedance spectroscopy techniques. The effects of volume ratio of water to ethanol (W/E) in solvent on the properties of the product were studied. The results show that the pure phase monoclinic crystal NiMoO4 product can be obtained when the W/E is 2:1. The diameter and length are 0.1–0.3 µm and approximately 3 µm, respectively. As an active material for supercapacitor, the NiMoO4 nanorods material delivered a discharge specific capacitance of 672, 498, and 396 F/g at a current density of 4, 7, and 10 A/g, respectively. The discharge specific capacitance slightly decreased from 815 to 588 F/g with a retention of 72% after 1000 cycles at a current density of 1 A/g. With these superior capacitance properties, the novel NiMoO4 integrated electrode materials could be considered as promising material for supercapacitors.

Surface molecularly imprinted polymer of solanesol (SA-SMIP) was prepared by reversed phase suspension polymerization using modified titanium dioxide (TiO2) as carrier, and operation conditions were investigated and optimized. Structures of modified TiO2 and SA-SMIP obtained at optimal conditions were characterized by Fourier transform infrared spectrometer adopting original TiO2 and non-surface molecularly imprinted polymer as reference. The SA-SMIP synthesized under optimal conditions displayed an excellent recognition of SA from the mixture of SA and triacontanol. The maximum separation degree of SA was 2.90. Finally, the adsorption kinetics and isotherm were investigated and analyzed. Adsorption kinetics results indicated that the adsorption of SA-SMIP to SA was a pseudo-second order process, and the adsorption of beginning and later stages was controlled by homogeneous particle diffusion and adsorption reaction process, respectively. Adsorption isotherm results documented hereby were two sorts of bonding sites, complete imprinted cavities and defective imprinted cavities. The adsorption for two bonding sites could be well lined up with the Langmuir model.

In this work, flavonoids in Polygonum cuspidatum Sieb. et Zucc. were extracted by ultrasound-assisted methodology and determined by ultraviolet–visible spectrophotometry. After that, extraction conditions were optimized by the single fact investigation, the central composite design, and response surface methodology (RSM) in turn. The results showed the optimal values of ethanol concentration, solid–liquid ratio, extraction temperature, extraction time, ultrasonic power, and number of extraction times were 60%, 1:20 (g/mL), 45 °C, 34 min; 80 W, and 5, respectively. The extraction ratio of flavonoids could be as high as 94.50%. The influence order of each factor was ultrasonic power > extraction time > extraction temperature > ethanol concentration. The results also showed that the experimental value was close to the predicted value (94.49%) of the established model by RSM, which proved that the established model was reasonable. The thermodynamic results showed that the extraction process was endothermic and could proceed spontaneously.

A joint diagnostic system was established for the diagnosis of laser-driven shock wave experiments. The system has high temporal resolution (time resolution ~12 ps) and high spatial resolution (spatial resolution ~7 μm) and fits for diagnostics of the experiment with small sample size and short time physical process. The joint diagnostic system was applied for shock wave measurement on the Shenguang-II laser facility. The passive shock breakout signal and active diagnostic signal were simultaneously obtained. The temporal measurement reliability of the system was verified using a multi-layered target. The experimental results show that the two measurement results were consistent.

We present an experimental study on the axisymmetric vortex ring generated by a thin circular disc. The velocity and vorticity fields are measured by digital particle image velocimetry (DPIV). The finite-time Lyapunov exponent fields and the Lagrangian coherent structures (LCSs) of the vortex flow are computed in order to analyse the transport of the fluid during its formation and identify the boundary of the vortex ring. The volume, circulation and energy of the vortex ring are calculated. It is found that the formation of the vortex ring basically includes three phases: a rapid growth phase, a stable growth phase and a non-axisymmetric phase. In the rapid growth phase (dimensionless time $0\lt {T}_{n} \lt 0. 2$) during which Taylor’s inviscid estimation is valid, the circulation of the vortex ring grows and the translational velocity of the vortex ring decreases. In the stable growth phase ($0. 2\lt {T}_{n} \lt 4$), the growth rate of the circulation decreases gradually. In the non-axisymmetric phase (${T}_{n} \gt 4$), the ring loses axisymmetry due to instability. Compared with the vortex ring generated by the laminar flow from an orifice, the one generated by a circular disc always moves with the disc, and the entrained fluid decreases and the saturated circulation increases. The temporal impulse exerted by the moving disc on the fluid is estimated by DPIV measurements and is calculated using the direct momentum conservation method. The momentum of the control volume enclosing the LCS is found to occupy 64–68 % of the entire impulse exerted by the disc on the fluid.

The Yangtze Platform preserves relatively thick carbonate successions and excellent fossil records across the Ediacaran–Cambrian boundary interval. The intensely studied Meishucun section in East Yunnan was one of the Global Stratotype Section candidates for the Precambrian–Cambrian boundary. However, depositional breaks were suspected in the section and the first appearance of small shelly fossils could not be verified. The Laolin section located in NE Yunnan is more continuous and shows great potential for global correlation of carbon isotope features across the Precambrian–Cambrian boundary. However, the stratigraphic framework and correlations were controversial. We studied and systematically sampled the Laolin section and present here new carbon isotope data for this section. The Laolin section consists of, in ascending order, the Baiyanshao dolostone of the Dengying Formation, the Daibu siliceous dolostone, Zhongyicun dolomitic phosphorite, lower Dahai dolostone and upper Dahai limestone of the Zhujiaqing Formation, and the black siltstone of the Shiyantou Formation. Our data reveal a large negative δ13C excursion (−7.2‰, L1′) in the Daibu Member, which matches the previously published data for the Laolin section, and a large positive excursion (+3.5‰, L4) in the Dahai Member, which was not shown in the published data. The excursion L1′ correlates well with the similarly large negative excursion near the first appearance of small shelly fossils in Siberia and Mongolia. Similar magnitude excursions are also known from Morocco and Oman, for which there are no robust fossil constraints but from where volcanic ash beds have been dated precisely at 542 Ma, thus confirming a global biogeochemical event near the Ediacaran–Cambrian boundary. Our data also indicate that deposition was more continuous at the Laolin section compared with the Meishucun section, where there are no records of a comparable negative excursion near the Ediacaran–Cambrian boundary, nor any comparable positive excursion in the Dahai Member. Therefore, the Laolin section has proven potential to be a supplementary Global Stratotype Section for the Ediacaran–Cambrian boundary on the Yangtze Platform.

Background: Increasing evidence suggests that neprilysin (NEP) may be the major degrading enzyme of amyloid beta (Aβ) in the brain and the NEP gene has been proposed as a candidate gene for Alzheimer's disease (AD). Association results between the NEP gene and AD are still preliminary. This study investigates the effect of the polymorphisms of −204G/C and 159C/T in the NEP gene on the development of sporadic Alzheimer's disease (SAD) in a southern Chinese community.

Method: 236 sporadic late-onset AD patients were recruited from Guangzhou Psychiatric Hospital in southern China, and 332 healthy elderly controls were enrolled from three old age homes in suburban Guangzhou. NEP and ApoE genotype were determined by PCR–RFLP.

Results: No differences in genotypic and allelic frequencies of −204G/C and 159C/T polymorphisms in NEP were found between AD and control group (for −204G/C genotype: χ2 = 2.34, P > 0.05; for allele: χ2 = 2.31, P > 0.05; for 159C/T genotype: χ2 = 1.34, P > 0.05; for allele: χ2 = 0.88, P > 0.05). Neither was any difference found in genotypic and allelic frequency when stratified by sex or by ApoE ε4 allele (P > 0.05).

Conclusions: Our results suggest that −204G/C and 159C/T polymorphisms of the NEP gene may not be associated with SAD. Moreover, both sex and ApoE ε4 allele do not affect the distribution of NEP gene polymorphisms.

The flapping coupling between two filaments is studied theoretically and experimentally in this paper. A temporal linear instability analysis is carried out based on a simplified hydrodynamic model. The dispersion relationship between the eigen-frequency ω and wavenumber k is expressed by a quartic equation. Two special cases of flapping coupling, i.e. two identical filaments having the same length and two filaments having different lengths, are studied in detail. In the case of two identical filaments, the theoretical analysis predicts four coupling modes, i.e. the stretched-straight mode, the antisymmetrical in-phase mode, the symmetrical out-of-phase mode and the indefinite mode. The theory also predicts the existence of an eigenfrequency jump during transition between the in-phase and out-of-phase modes, which has been observed in previous experiments and numerical simulations. In the case of two filaments having different lengths, four modes similar to those in the former case are identified theoretically. The distribution of coupling modes for both the cases is shown in two planes. One is a dimensionless plane of S vs. U, where S is the density ratio of solid filament to fluid and U2 is the ratio of fluid kinetic energy to solid elastic potential energy. The other is a dimensional plane of the half-distance (h) between two filaments vs. the filament length (L). Relevant experiments are carried out in a soap-film tunnel and the stable and unstable modes are observed. Theory and experiment are compared in detail. It should be noted that the model used in our analysis is a very simplified one that can provide intuitional analytical results of the coupling modes as well as their qualitative distributions. The factors neglected in our model, such as vortex shedding, viscous and nonlinear effects, do not allow the model to predict results precisely consistent with the experiments. Moreover, the Strouhal numbers of the flapping filaments are found to be generally around a fixed value in the experiments for both cases, implying that the filaments try to maintain a lower potential energy state.

Furniture contaminated with uranium will be disposed of, together with U-bearing waste, in ageological repository such as the WIPP site in New Mexico. It is important to understand the effect of the wooden furniture on the migration of uranium in order to predict long-term behavior of uranium in a geological repository environment. In this paper, we present natural uraninite-bearing carbonized wood pieces from a sandstone-hosted roll-type uranium ore deposit in NW China. Results from SEM and TEM observations show that there are nanometer sized, and micron-sized, uraninite crystals that have accumulated on cell walls of the carbonized wood. Some uranitite crystrals display oval and round shapes that may be the result of microbial-induced reduction of uranium from groundwater. The wood carbonized fragments are the most uranium-rich “phase.” In some areas, aggregates of pyrite crystals occur withthe uraninite. It is proposed that organic components from the decay of the wood cells provide nutrientsfor the anaerobic bacteria to grow. The wood pieces with the bacteria inside may serve as scavengers of uranium because of the local reducing chemical environment.

This paper attempts to evaluate the clinical usefulness of CYFRA 21-1 as a serum tumour marker in patients with head and neck squamous cell carcinoma (HNSCC).

The serum concentration of CYFRA 21-1 was measured utilizing a new electrochemiluminescent immunoassay (ECLIA) in 142 patients with HNSCC before and after treatment, 68 patients with benign tumours of the head and neck, and 50 healthy controls.

Serum levels of CYFRA 21-1 in patients with HNSCC were significantly higher than those of benign tumours and healthy controls (p < 0.001). The diagnostic sensitivity and specificity of CYFRA 21-1 for HNSCC were 62 per cent and 100 per cent, respectively. The positive rates of CYFRA 21-1 increased with progression of HNSCC, serum CYFRA 21-1 levels were related to the tumour stage expressed by primary tumour (T) and nodal status (N) (p < 0.001), but not related to patient age, gender, smoking and drinking habit, or histopathological grade (p > 0.05). Post-treatment levels of CYFRA 21-1 in HNSCC decreased significantly (p < 0.001). Among 38 patients with clinical or radiological evidence of a recurrence during follow-up, 78.9 per cent (30 of 38) showed an increase in CYFRA 21-1.

The analytical ECLIA performance for serum CYFRA 21-1 provides a new means of clinical assessment for HNSCC. The results of ECLIA suggest that the serum marker CYFRA 21-1 is valuable not only for diagnosis but also for close monitoring of patients with HNSCC.