In the present study, we investigated the influence of different mid-stage N compensation timings on agronomic and physiological traits associated with grain yield and quality in field experiments. Two japonica rice cultivars with a good tasting quality (Nangeng 9108 and Nangeng 5055) were examined under eight N compensation timings (N1–N6: one-time N compensation at 7-2 weeks before heading; N7: split N compensation at 5 and 3 weeks before heading; N8: split N compensation at 4 and 2 weeks before heading) and a control with no N compensation. The highest yield was obtained with N7, followed by N3. The yield advantage is mainly attributable to the improved population structure (higher productive tiller rate with a stable number of effective panicles), higher total number of spikelets per unit area (large panicles with more grains per panicle), larger leaf area index in the late period and higher photosynthetic production capacity (more dry matter accumulation and transportation in the middle and late periods). Delaying N compensation timing improved the processing and nutritional quality of rice, but decreased the quality of appearance and cooking/eating traits. Our results suggest that, from the perspective of achieving relative coordination between high yield and high quality of japonica rice, the optimal N compensation should be divided equally at 5 and 3 weeks before heading. However, if simplifying the number of operations and the pursuit of eating quality were considered, one-time N compensation should be conducted at 5 weeks before heading.

Effects of plasma non-uniformities and kinetic dispersiveness on the spontaneous excitation of geodesic acoustic mode (GAM) by reversed shear Alfvén eigenmode (RSAE) are investigated numerically. It is found that, due to the turning points induced by the shear Alfvén continuum structure, the nonlinear excitation of GAM is a quasiexponentially growing absolute instability. As the radial dependence of GAM frequency and pump RSAE mode structure are accounted for, the radially inward propagating GAM is preferentially excited, leading to core localized thermal plasma heating by GAM collisionless damping. Our work, thus, suggests that GAM excitation plays a crucial role in not only RSAE nonlinear saturation, but also anomalous fuel ion heating in future reactors.

For the safety problems caused by the limited landing space of the deck during the arresting process of the carrier-based aircraft, a dynamic model of the carrier-based aircraft’s landing and arresting is built. Based on the batch simulation method, the lateral dynamics safety envelope of the aircraft during the arresting was defined, and the dynamic response of the key points in the envelope during the arresting process was investigated. Subsequently, the influence of engine thrust and aircraft quality on the arresting safety envelope was studied based on reasonable safety evaluation indicators, and the safety status envelope of the deck arresting was given. Then, the particular Hamilton-Jacobi partial differential equation is used to obtain the lateral dynamics safety envelope of the carrier-based aircraft in the process of landing and arresting by backward inversion. Results indicate that engine thrust and landing quality have little effect on the yaw angle in the arresting safety boundary during the arresting. Additionally, with the engine thrust and landing quality increase, the maximum safe off-centre distance gradually decreases, and the safety boundary decreases accordingly. During the phase of landing glide, the engine thrust and quality have little effect on the maximum safe eccentric distance. When the engine thrust is increased by 40%, the maximum safe yaw angle is reduced from 0.3°, and the safety boundary is reduced by 4.2%. When the aircraftquality increases by 40%, the maximum safe yaw angle is reduced by 0.4°, and the safety boundary is reduced by 2.8%. The findings of this paper can provide framework for the research on theaircraft-to-carrier dynamic matching characteristics of the carrier-based system, and is of great significance to the research on improving the safety of the carrier-based aircraft landing arresting.

Pneumatic launch systems for Unmanned Aerial Vehicles (UAVs), including mechanical and pneumatic systems, are complex and non-linear. They are subjected to system parameters during launch, which leads to difficulty in engineering research analysis. For example, the mismatch between the UAV parameters and the parameter design indices of the launch system as well as the unclear design indices of the launching speed and overload of UAVs have a great impact on launch safety. Considering this situation, some studies are presented in this paper. Taking the pneumatic launch system as a research object, a pneumatic launcher dynamic simulation model is built based on co-simulation considering the coupling characteristics of the mechanical structure and transmission system. Its accuracy was verified by laboratory test results. Based on this model, the paper shows the effects of the key parameters, including the mass of the UAV, cylinder volume, pressure and moment of inertia of the pulley block, on the performance of the dynamic characteristics of the launch process. Then, a method for matching the parameter characteristics between the UAV and launch system based on batch simulation is proposed. The set of matching parameter values of the UAV and launch system that satisfy the launch take-off safety criteria are calculated. Finally, the influence of the system parameters of the launch process on the launch performance was analysed in detail, and the design optimised. Meaningful conclusions were obtained. The analysis method and its results can provide a reference for engineering and theoretical research and development of pneumatic launch systems.

Carrier-based unmanned aerial aircraft (UAV) structure is subjected to severe tensile load during takeoff, especially the drawbar, which affects its fatigue performance and structural safety. However, the complex structural features pose great challenges for the engineering design. Considering this situation, a structural design, fatigue analysis, and parameters optimisation joint working platform are urgently needed to solve this problem. In this study, numerical analysis of strain fatigue is carried out based on the laboratory fatigue failure of the carrier-based aircraft drawbar. Taking the sensitivity of drawbar parameters to stress and life into account and optimum design of drawbar with fatigue life as a target using the parametric method, this study also includes cutting-edge parameters of milling cutters, structural details of the drawbar and so on. Then an experimental design is applied using the Latin hypercube sampling method, and a surrogate model based on RBF neural network is established. Lastly, a multi-island genetic algorithm is introduced for optimisation. The results show that the error between the obtained optimal solution and simulation is 0.26%, while the optimised stress level is reduced by 15.7%, and the life of the drawbar is increased by 122%.

The rotating instability in a contra-rotating axial flow compressor is investigated by experiments. Twenty-four pressure sensors were installed on the casing to capture the unsteady flow in the rotor tip region simultaneously. A double-phase-locking technique suitable for the contra-rotating compressor was proposed to characterise the static pressure contours of the rotor tip. The mean and root-mean-square pressure contours indicate that rotating instability occurs before the rotating stall happened, and the rotor tip clearance vortex is located upstream of the rear rotor leading edge plane before stall. Fourier spectrum shows that rotating instability and rotating stall both happened under the stall condition, and the frequency band of rotating instability does not change with the flow rate. In the front rotor, the frequency of rotating instability is half of the blade passing frequency. It is verified that the modal estimation method can be implemented by using the average azimuthal phase velocity, which significantly reduced the number of pressure sensors required. Modal estimation results show that each peak of the rotating instability frequency band corresponds to a unique dominant circumferential mode. By optimising average azimuthal phase velocity, an improved modal estimation method is obtained, which can further improve the reliability of the modal estimation results.

Soybean meal is rich in soybean isoflavones, which exhibit antioxidant, anti-inflammatory, antiviral and anticancer functions in humans and animals. This study was conducted to investigate the effects of soybean isoflavones on the growth performance, intestinal morphology and antioxidative properties in pigs. A total of 72 weaned piglets (7.45 ± 0.13 kg; 36 males and 36 females) were allocated into three treatments and fed corn-soybean meal (C-SBM), corn-soy protein concentrate (C-SPC) or C-SPC supplemented with equal levels of the isoflavones found in the C-SBM diet (C-SPC + ISF) for a 72-day trial. Each treatment had six replicates and four piglets per replicate, half male and half female. On day 42, one male pig from each replicate was selected and euthanized to collect intestinal samples. The results showed that compared to pigs fed the C-SPC diet, pigs fed the C-SBM and C-SPC + ISF diets had higher BW on day 72 (P < 0.05); pigs fed the C-SBM diet had significantly higher average daily gain (ADG) during days 14 to 28 (P < 0.05), with C-SPC + ISF being intermediate; pigs fed the C-SBM diet tended to have higher ADG during days 42 to 72 (P = 0.063), while pigs fed the C-SPC + ISF diet had significantly higher ADG during days 42 to 72 (P < 0.05). Moreover, compared to pigs fed the C-SPC diet, pigs fed the C-SBM diet tended to have greater villus height (P = 0.092), while pigs fed the C-SPC + ISF diet had significantly greater villus height (P < 0.05); pigs fed the C-SBM and C-SPC + ISF diets had significantly increased villus height-to-crypt depth ratio (P < 0.05). Compared with the C-SPC diet, dietary C-SPC + ISF tended to increase plasma superoxide dismutase activity on days 28 (P = 0.085) and 42 (P = 0.075) and reduce plasma malondialdehyde (MDA) content on day 42 (P = 0.089), as well as significantly decreased jejunal mucosa MDA content on day 42 (P < 0.05). However, no significant difference in the expression of tight junction genes among the three groups was found (P > 0.05). In conclusion, our results suggest that a long-term exposure to soybean isoflavones enhances the growth performance, protects the intestinal morphology and improves the antioxidative properties in pigs.

The present study was designed to detect three single nucleotide polymorphisms (SNPs) located on 22q11 that was thought as being of particularly importance for genetic research into schizophrenia. We recruited a total of 176 Chinese family trios of Han descent, consisting of mothers, fathers and affected offspring with schizophrenia for the genetic analysis. The transmission disequilibrium test (TDT) showed that of three SNPs, rs10314 in the 3′-untranslated region of the CLDN5 locus was associated with schizophrenia (χ2 = 4.75, P = 0.029). The other two SNPs, rs1548359 present in the CDC45L locus centromeric of rs10314 and rs739371 in the 5′-flanking region of the CLDN5 locus, did not show such an association. The global chi-square (χ2) test showed that the 3-SNP haplotype system was not associated with schizophrenia although the 1-df test for individual haplotypes showed that the rs1548359(C)-rs10314(G)-rs739371(C) haplotype was excessively non-transmitted (χ2 = 5.32, P = 0.02). Because the claudin proteins are a major component for barrier-forming tight junctions that could play a crucial role in response to changing natural, physiological and pathological conditions, the CLDN5 association with schizophrenia may be an important clue leading to look into a meeting point of genetic and environmental factors.

Triptorelin (TRI), a gonadotropin-releasing hormone agonist allowing ovulation synchronization in pigs, is indispensable for fixed-time artificial insemination (FTAI) protocols. However, the effect of FTAI using TRI (FTAI-TRI) on the reproductive performance is controversial. We performed a meta-analysis to determine whether FTAI-TRI affects reproductive performance of pigs, including pregnancy rate (PR), number of pigs born alive per litter (NBA), farrowing rate (FR) and total number of pigs born per litter (TNB). A total of 37 trials from 15 studies were extracted and analysed in Stata. A weighted mean difference (WMD) with 95% confidence interval (CI) was calculated for NBA and TNB, and risk ratio (RR) with 95% CI was calculated for PR and FR. Pregnancy rate, TNB and NBA data were applied to a fixed-effect protocol, and FR data were applied to a random-effect protocol. We found that for weaned sows, the FTAI-TRI group had comparable reproductive performance to the artificial insemination (AI) following oestrus detection (EDAI) group. Fixed-time AI has many advantages, including the elimination of the need to heat-check twice daily, so that FTAI-TRI is a good substitute for EDAI. Subgroup analysis indicated that the optimal timing of triptorelin treatment was 96 h after weaning, which gave significant positive effects on PR (RR = 1.08, P = 0.000) and non-significant positive effects on TNB (WMD = 0.12, P = 0.452). Triptorelin at a dose of 100 μg showed better effects than 200 μg, with significant positive effects on PR (RR = 1.09, P = 0.005) and FR (RR = 1.06, P = 0.036). So a single dose of 100 μg was recommended. The optimal protocol was insemination at 24 h and again at 48 h after triptorelin administration if they remained in standing oestrus, and this provided a significantly higher NBA (WMD = 0.59, P = 0.013) that increased by 0.59. For gilts, the FTAI-TRI group showed decreased (not significant) PR (RR = 0.96, P = 0.127) and significantly decreased FR (RR = 0.93, P = 0.013), TNB (WMD = −0.85, P = 0.006) and NBA (WMD = −0.98, P = 0.000), which were inferior to those in the EDAI group. In conclusion, the effects of FTAI-TRI on the reproductive performance of pigs were parity-, treatment timing-, insemination timing-, and dosage-dependent. Fixed-time AI using triptorelin could effectively replace the EDAI protocol for sows, but not for gilts.

The sense of bitter taste is critical for chickens to acquire and select feeds. It is important to understand the roles and mechanisms of bitter taste transduction in chickens. Denatonium is extensively used as a bitter taste receptor agonist to activate bitter taste receptors in recent studies. The objective of this study was to investigate the physiological effects and the potential molecular mechanisms of dietary exposure to a strong bitter taste receptor agonist on the jejunal epithelial cells of yellow-feathered chickens. A total of 240 yellow-feathered chickens were divided into four treatments receiving a normal diet (Control), a low-dose denatonium treatment (Control + 5 mg/kg denatonium), a middle-dose denatonium treatment (Control + 20 mg/kg denatonium) and a high-dose denatonium treatment (Control + 100 mg/kg denatonium) for 56 days, respectively. The results showed that dietary denatonium reduced (P < 0.05) the growth performance of chickens. High-dose denatonium damaged the morphology of the jejunal epithelium and decreased (P < 0.05) the activities of Ca2+-ATPase, sucrase and maltase after 56 days of exposure. Meanwhile, high-dose denatonium increased (P < 0.05) mRNA expressions of bitter taste receptors, which resulted in enhanced apoptosis in jejunal epithelial cells after 56 days of exposure. Furthermore, middle-dose and high-dose denatonium exhibited increased (P < 0.05) mRNA level of claudin 2 and decreased (P < 0.05) mRNA level of occludin after 28 days of exposure. Only high-dose denatonium decreased (P < 0.05) mRNA level of occludin after 56 days of exposure. In conclusion, denatonium manifested deleterious effects on the jejunum of chickens in a dose–effect manner via damaging the morphology of the jejunal epithelium, and inducing apoptosis associated with bitter taste receptors. Our data suggest that bitter-tasting feed additives may have side effects on the growth and development of intestines in chickens.

A novel high-power impulse plasma source (HiPIPS) technology that combines atmospheric pressure plasma jets with high-power pulsed direct current generators is described. Pulsed power is applied in microsecond pulses (20 µs) at low duty cycle (10%) and low frequency (0.5 kHz) leading to high peak power densities (10–75 kW) and high peak currents (100–250 A) while maintaining low average power (<40 W) and low processing temperatures (<50 °C). These conditions result in the generation of a highly dense plasma discharge (ne = 6.23 × 1016 cm−3) for surface modification and deposition of coatings. Using HiPIPS, Ar-initiated metallic Ti, CoCr, or Ti–6Al–4V plasma was generated, and the plasma properties were characterized by measuring current–voltage characteristics, electron densities (Langmuir probe), and optical emission spectra. HiPIPS CoCr and Ti–6Al–4V coatings were deposited for proof of concept of the technique. The resulting coatings were examined with scanning electron microscopy, energy-dispersive X-ray spectroscopy, and nanoindentation.

Distillers dried grains with solubles (DDGS) are highly susceptible to lipid oxidation because DDGS contain about 10% crude fat, which is largely composed of polyunsaturated fatty acids. l-carnitine serves an important function in fatty acids β-oxidation, and also has antioxidant properties. The objective of this study was to examine the effects of l-carnitine in the DDGS diet of gestating and lactating sows on reproductive performance, milk composition and antioxidant status of sows and their offspring. One hundred and twenty sows (Landrace×Large white, mean parity 4.2, initial BW 230 kg) were randomly allotted to 1 of 4 dietary treatments (n=30 sows/treatment). Treatments were arranged as a 2×2 factorial with two levels of dietary DDGS (0 v. 250 g/kg in gestating diets and 400 g/kg in lactating diets) and two levels of dietary l-carnitine (0 v. 100 mg/kg in gestating diets and 0 v. 200 mg/kg in lactating diets). Distillers dried grains with solubles had no significant effect on litter size but significantly reduced the birth weights and weaning weights of piglets (P<0.05). Distillers dried grains with solubles reduced the antioxidant enzyme activities (P<0.05) and increased the malondialdehyde level in the plasma of sows on day 60 of gestation (P=0.004) and day 14 of lactation (P=0.008). The compositions of colostrum and milk were not affected by inclusion of DDGS and dietary l-carnitine (P>0.05). Supplementing the diets with l-carnitine had no significant effect of total litter size (P>0.05) but increased the number of piglets born alive and piglets weaned, birth weight and weaning weight of piglets and litter weight at birth and weaning (P<0.05). l-carnitine supplementation also increased the concentration of l-carnitine in milk and l-carnitine status of piglets (P<0.05). The antioxidant enzyme activities of new born and weaning piglets were increased (P<0.05) by maternal dietary l-carnitine but this did not extend to finishing pigs. In conclusion, including DDGS in the sows diet could induce oxidative stress, which may be associated with the reduced individual birth and weaning weight of piglets. Dietary l-carnitine supplementation improved the antioxidant and l-carnitine status of sows, which may be associated with the improved reproduction and piglet performance and the antioxidant status of piglets at birth and weaning. There were no interactions between DDGS and l-carnitine.

An analytical solution is launched for Twin-cell Composite Box Beam (TCCBB) considering the impact of shear lag effects of concrete slab and twin-cell steel girder. To in-depth explore its mechanical mechanism, a new warping displacement mode of wide flange is chosen to meet the essential deformation feature of this TCCBB model by authors. Combining the virtual work principle with the thin-walled beam theory, its governing equations and boundary conditions are established for the TCCBB model. Closed form solutions for longitudinal strain and its shear lag coefficients are also derived under concentrated loads. What's more, experiment investigation and related parameter impact analysis are carried out for this established TCCBB model. Through this research, it shows that the proposed method can be applied to describe and predict shear lag behaviors for this type of composite structure. That further suggests that it provides a certain reference value for engineering design and its late reinforcement and maintenance in the composite structure.

The oriental fruit moth (OFM) Grapholita molesta (Lepidoptera: Tortricidae) is an important economic pest of stone and pome fruits worldwide. We sequenced the OFM genome using next-generation sequencing and characterized the microsatellite distribution. In total, 56,674 microsatellites were identified, with 11,584 loci suitable for primer design. Twenty-seven polymorphic microsatellites, including 24 loci with trinucleotide repeat and three with pentanucleotide repeat, were validated in 95 individuals from four natural populations. The allele numbers ranged from 4 to 40, with an average value of 13.7 per locus. A high frequency of null alleles was observed in most loci developed for the OFM. Three marker panels, all of the loci, nine loci with the lowest null allele frequencies, and nine loci with the highest null allele frequencies, were established for population genetics analyses. The null allele influenced estimations of genetic diversity parameters but not the OFM's genetic structure. Both a STRUCTURE analysis and a discriminant analysis of principal components, using the three marker panels, divided the four natural populations into three groups. However, more individuals were incorrectly assigned by the STRUCTURE analysis when the marker panel with the highest null allele frequency was used compared with the other two panels. Our study provides empirical research on the effects of null alleles on population genetics analyses. The microsatellites developed will be valuable markers for genetic studies of the OFM.

Toxocariasis is a very prevalent zoonotic disease worldwide. Recently, investigators have focused more on Toxocara spp. seroprevalence in humans. Information regarding Toxocara seroprevalence in people from different ethnic backgrounds in China is limited. For this study, blood samples were collected from a total of 802 Han, 520 Korean, 303 Manchu, and 217 Mongol subjects from Jilin and Shandong provinces. The overall Toxocara seroprevalence was 16·07% (14·21% Han, 20·58% Korean, 11·22% Manchu, 18·89% Mongol). Living in suburban or rural areas, having dogs at home, exposure to soil, and consumption of raw/undercooked meat were risk factors for Toxocara infection. Exposure to soil was identified as the major risk factor for Toxocara seropositivity in all of the tested ethnicities. To the best of our knowledge, this is the first report concerning Toxocara infection in Manchus and Mongols in China. The present study provided baseline data for effective prevention strategies of toxocariasis in northeast China and recommends improvements in personal hygiene standards to achieve this goal.