As a typical plasma-based optical element that can sustain ultra-high light intensity, plasma density gratings driven by intense laser pulses have been extensively studied for wide applications. Here, we show that the plasma density grating driven by two intersecting driver laser pulses is not only nonuniform in space but also varies over time. Consequently, the probe laser pulse that passes through such a dynamic plasma density grating will be depolarized, that is, its polarization becomes spatially and temporally variable. More importantly, the laser depolarization may spontaneously take place for crossed laser beams if their polarization angles are arranged properly. The laser depolarization by a dynamic plasma density grating may find application in mitigating parametric instabilities in laser-driven inertial confinement fusion.

The effect of pre-slaughter handling conditions and the RYR1 gene on blood Cortisol, lactate and creatine Phosphokinase (CPK) levels at exsanguination were assessed using 2,923 surveyed pigs from 106 deliveries to five Spanish abattoirs across two seasons. The relationship between blood parameters, carcase skin damage and pork quality traits was also assessed. The season influenced blood cortisol, lactate and CPK values. Females always showed higher concentrations of cortisol, lactate, and CPK than males. Pigs carrying the recessive allele of the RYR1 gene exhibited increased lactate and CPK concentrations but not cortisol. The cortisol concentration decreased in lean pigs that were slaughtered in winter after short lairage periods. The lactate concentration decreased with loading time and increased in summer with lairage time and carcase lean content. The CPK concentration increased with lairage time, carcase weight, and carcase lean content, and with the duration of winter transports. Each truck delivery only explained approximately 10% of the variance in blood parameters. Lairage time is the most influential pre-slaughter handling practice on the assessed welfare indicators. In addition, different optimal lairage times might be appropriate depending on season. Blood cortisol, lactate, and CPK concentrations increased concomitantly with skin damage score. Blood parameters were weakly correlated and they also showed low association with pork quality traits.

This paper provides a solution to the active vibration control of a microsatellite with two solar panels. At first, the microsatellite is processed as a finite element model containing a rigid body and two flexible bodies, according to the principles of mechanics, and that the dynamic characteristics are solved by modal analysis. Secondly, the equation involving vibration control is established according to the finite element calculation results. There are several actuators composed of macro fibre composite on the two solar panels for outputting control force. Furthermore, the control voltage for driving actuator is calculated by using fuzzy algorithm. It is clear that the smart structure consists of the flexible bodies and actuators. Finally, the closed-loop control simulation for suppressing harmful vibration is established. The simulation results illustrate that the responses to the external excitation are decreased significantly after adopting fuzzy control.

Tuberculosis (TB) is generally considered a disease that principally afflicts the low-income segments of a population. In the Nanshan District of Shenzhen, China, with the economic transformation and a new Headquarters Economy (HE) emerging, there are now more cases in office workers than in manufacturing workers. To illustrate this trend, we describe a small TB outbreak in an office building located in the centre of the rapidly growing HE district. Two active pulmonary tuberculosis cases were found in workers who shared an office, and whole genome sequencing showed that the genetic distance between the strains of the two cases was just one single nucleotide polymorphism, consistent with intra-office transmission. Investigation of 30 other workers in the same or adjacent offices with interviews, interferon-gamma release assays (IGRAs) and chest X-rays, identified one new TB case and latent tuberculosis infection (LTBI) in 40.0% (12/30) of the contacts. The offices were under-ventilated. None of the IGRA positive, asymptomatic contacts agreed to receive treatment for LTBI, presumably due to TB stigma, and over the next 2 years 69.0% (20/29) of the contacts were lost to follow-up. Treatment for LTBI and stigma of TB remain challenges here. Office workers in the HE of rapidly economic developing areas should be targeted with increased vigilance by TB control programmes.

Zeolite ZSM-5 was synthesized successfully, in situ, on pyrokaolin microspheres (PKM) under hydrothermal conditions, without the use of an organic amine template. The utility of alkali-modified pyrokaolin microspheres (AMKM) was also evaluated. The resulting products were characterized using X-ray diffraction, scanning electron microscopy (SEM) and N2-adsorption isotherm data. The material containing ZSM-5 synthesized from the system PKM-additional silica-water had a large surface area and pore volume with significant enhancements in the micropore surface area and micropore volume. The SEM images show that the synthesis of zeolite ZSM-5 from pyrokaolin microspheres (PKM) led to the formation of polycrystalline aggregates <2 μm in size. The purity of the zeolite ZSM-5 produced was affected by both the pH value of the reactant system and the reaction temperature. In the system containing AMKM-additional silica-water, very little of the synthesized zeolite resided on the kaolin microspheres.

Extensive insecticide use has led to the resistance of mosquitoes to these insecticides, posing a major barrier to mosquito control. Previous Solexa high-throughput sequencing of Culex pipiens pallens in the laboratory has revealed that the abundance of a novel microRNA (miRNA), miR-13664, was higher in a deltamethrin-sensitive (DS) strain than a deltamethrin-resistant (DR) strain. Real-time quantitative PCR revealed that the miR-13664 transcript level was lower in the DR strain than in the DS strain. MiR-13664 oversupply in the DR strain increased the susceptibility of these mosquitoes to deltamethrin, whereas inhibition of miR-13664 made the DS strain more resistant to deltamethrin. Results of bioinformatic analysis, quantitative reverse-transcriptase polymerase chain reaction, luciferase assay and miR mimic/inhibitor microinjection revealed CpCYP314A1 to be a target of miR-13664. In addition, downregulation of CpCYP314A1 expression in the DR strain reduced the resistance of mosquitoes to deltamethrin. Taken together, our results indicate that miR-13664 could regulate deltamethrin resistance by interacting with CpCYP314A1, providing new insights into mosquito resistance mechanisms.

To investigate the control effect of the synthetic jet on the aerodynamic characteristic of rotors, a numerical simulation procedure for the rotor flowfield is established. First, a moving-embedded grid method and an unsteady Reynolds Averaged Navier–Stokes (URANS) solver are established for predicting the complex flowfield of rotors. A velocity jet boundary condition over the jet actuator orifice is constructed, and a numerical method for simulating the active flow control on rotors is developed. Then, the effectiveness of the simulation method is validated by comparing the numerical results of jet control on NACA 0015 aerofoil with the experimental data. At last, the aerodynamic characteristic of rotors with synthetic jet actuators located on the suction surface of the blade in forward flight is calculated. The results indicate that the synthetic jet has the capability of improving the aerodynamic characteristic of rotors, especially in inhibiting the flow separation over the surface. In addition, the increase of the jet momentum coefficient and the jet angle can both enhance the lift coefficient in the retreating side. Compared with a single jet, jet arrays have better control effects on improving the aerodynamic characteristic of rotors in forward flight.

Protocols designed for the adipogenic differentiation of human and mouse cells are commonly used for inducing the adipogenesis of bovine stromal vascular cells. However, likely due to metabolic differences between ruminant and non-ruminant animals, these methods result in only few cells undergoing complete adipogenesis with minimal lipid droplet accumulation. Here, we discuss the development of an adipogenic differentiation protocol for bovine primary cells through a three-dimensional spheroid culture. Stromal vascular cells derived from bovine intramuscular fat were isolated and stored in liquid nitrogen before culturing. Cells were cultured in hanging drops for 3 days to allow for the formation of spherical structures. The spheroids were then transferred to cell culture plates with endothelial basal medium-2 for 3 days and in Dulbecco’s Modified Eagle’s Medium (DMEM) supplemented with a standard adipogenic cocktail for 3 additional days, which were then allowed to fully differentiate for 3 days in DMEM supplemented with insulin. Compared with conventional two-dimensional culture, cells in a three-dimensional spheroid culture system had higher adipogenic gene expression and consequently contained more adipocytes with larger lipid droplets. In addition, endothelial induction of spheroids prior to adipogenic differentiation is essential for efficient induction of adipogenesis of bovine stromal vascular cells, mimicking in vivo adipose development. In summary, the newly developed three-dimensional spheroid culture method is an efficient way to induce adipogenic differentiation and study adipose development of cells derived from ruminant animals, which also can be used for studying the role of angiogenesis in adipose development.

This paper reports the measurement of the energy loss of protons at the energy of 100 keV penetrating a partially ionized hydrogen plasma. The plasma of ne ≈ 1015–16 cm−3; Te ≈ 1–2 eV and lifetime of about 8 µs is created by the hydrogen gas discharge. The experimental results show an increase of a factor of 2.8 in the energy loss, which are in good agreement with the Bethe, Standard Stopping Model, Li–Petrasso and Vlasov models’ predictions within the error limit. The Bethe–Bloch Coulomb logarithm term is found to increase by a factor of 4.0 for free electrons as compared with the situation where bound electrons prevail. The potential application of protons energy loss for diagnosing the electron density in plasma is proposed too.

The discovery of the first electromagnetic counterpart to a gravitational wave signal has generated follow-up observations by over 50 facilities world-wide, ushering in the new era of multi-messenger astronomy. In this paper, we present follow-up observations of the gravitational wave event GW170817 and its electromagnetic counterpart SSS17a/DLT17ck (IAU label AT2017gfo) by 14 Australian telescopes and partner observatories as part of Australian-based and Australian-led research programs. We report early- to late-time multi-wavelength observations, including optical imaging and spectroscopy, mid-infrared imaging, radio imaging, and searches for fast radio bursts. Our optical spectra reveal that the transient source emission cooled from approximately 6 400 K to 2 100 K over a 7-d period and produced no significant optical emission lines. The spectral profiles, cooling rate, and photometric light curves are consistent with the expected outburst and subsequent processes of a binary neutron star merger. Star formation in the host galaxy probably ceased at least a Gyr ago, although there is evidence for a galaxy merger. Binary pulsars with short (100 Myr) decay times are therefore unlikely progenitors, but pulsars like PSR B1534+12 with its 2.7 Gyr coalescence time could produce such a merger. The displacement (~2.2 kpc) of the binary star system from the centre of the main galaxy is not unusual for stars in the host galaxy or stars originating in the merging galaxy, and therefore any constraints on the kick velocity imparted to the progenitor are poor.

Human cystic echinococcosis is a widespread, chronic, endemic, helminthic zoonosis caused by larval tapeworms of the species Echinococcus granulosus. At present, there is no rational and effective therapy for patients with echinococcosis. The present study evaluated whether the combination of alkaloids from Sophora moorcroftiana seeds (SMSa2) and Bacillus Calmette–Guérin (BCG) was effective in the treatment of experimental echinococcosis. After 20 weeks of secondary infection with protoscoleces, mice were randomly allocated to five groups and treated for 6 weeks by daily intragastric administration of albendazole (ABZ, 100 mg/kg), SMSa2 (100 mg/kg), BCG (abdominal subcutaneous injection at 5 × 106 CFU), SMSa2 + BCG (100 mg/kg SMSa2 and 5 × 106 CFU BCG) or normal saline (untreated group), respectively. The results indicated a significant reduction in the weight of hydatid cysts in the SMSa2 + BCG group compared with the untreated, SMSa2 and BCG groups. The rate of inhibition of hydatid cyst growth in the SMSa2 + BCG group (76.1%) was obviously increased compared with that in the SMSa2 (25.7%) and BCG (26.6%) groups, respectively. Compared with the untreated control, the SMSa2 + BCG group showed a non-significant increase in serum interleukin-4 (IL-4). Furthermore, the serum levels of interferon-γ (IFN-γ) between the untreated and SMSa2 + BCG groups were not statistically different. Therefore, the combination of alkaloids from S. moorcroftiana seeds and BCG can reduce cyst burden and is an effective therapeutic regimen against echinococcosis.

Based on unstructured hybrid grid and dynamic overlapping grid technique, numerical simulations of Unsteady Reynolds Averaged Navier-Stokes equations were performed and investigation on isolated propeller aerodynamic characteristics and effects of propeller slipstream on turboprops were undertaken. The computational grid consisted of rotational subzone of propeller and stationary major-zone of aircraft, and walls criterion was used in the automatic hole-cutting procedure. Distance weight interpolation and tri-linear interpolation were developed to transfer information between the rotational and stationary subzones. The boundaries of overlapping grids were optimized for fixed axis rotation. The governing equations were solved by dual-time method and Lower Upper-Symmetric Gauss-Seidel method. The method and grid technique were verified by isolated propeller configuration and the computational results were in well agreement with the experimental data. The grid independence was studied to establish the numerical results. Finally, the flow around a turboprop case was simulated and the influence of propeller slipstream was presented by analyzing the surface pressure contours, profile pressure distribution, vorticity contours and profile streamline. It's indicated that the slipstream accelerates and rotates the free stream flow, changing the local angle of attack, enhancing the downwash effects, affecting the pressure distribution on wing and horizontal tail, as well as increasing the drag coefficient, pitching moment coefficient and the slope of lift coefficient.