In the present study, we investigated the influence of different mid-stage N compensation timings on agronomic and physiological traits associated with grain yield and quality in field experiments. Two japonica rice cultivars with a good tasting quality (Nangeng 9108 and Nangeng 5055) were examined under eight N compensation timings (N1–N6: one-time N compensation at 7-2 weeks before heading; N7: split N compensation at 5 and 3 weeks before heading; N8: split N compensation at 4 and 2 weeks before heading) and a control with no N compensation. The highest yield was obtained with N7, followed by N3. The yield advantage is mainly attributable to the improved population structure (higher productive tiller rate with a stable number of effective panicles), higher total number of spikelets per unit area (large panicles with more grains per panicle), larger leaf area index in the late period and higher photosynthetic production capacity (more dry matter accumulation and transportation in the middle and late periods). Delaying N compensation timing improved the processing and nutritional quality of rice, but decreased the quality of appearance and cooking/eating traits. Our results suggest that, from the perspective of achieving relative coordination between high yield and high quality of japonica rice, the optimal N compensation should be divided equally at 5 and 3 weeks before heading. However, if simplifying the number of operations and the pursuit of eating quality were considered, one-time N compensation should be conducted at 5 weeks before heading.

A disruption database characterizing the current quench of disruptions with ITER-like tungsten divertor has been developed on EAST. It provides a large number of plasma parameters describing the predisruptive plasma, current quench time, eddy current, and mitigation by massive impurity injection, which shows that the current quench time strongly depends on magnetic energy and post-disruption electron temperature. Further, the energy balance and magnetic energy dissipation during the current quench phase has been well analysed. Magnetic energy is also demonstrated to be dissipated mainly by ohmic reheating and inductive coupling, and both of the two channels have great effects on current quench time. Also, massive gas injection is an efficient method to speed up the current quench and increase the fraction of impurity radiation.

Porphyromonas gingivalis has been linked to the development and progression of oesophageal squamous cell carcinoma (ESCC), and is considered to be a high-risk factor for ESCC. Currently, the commonly used methods for P. gingivalis detection are culture or DNA extraction-based, which are either time and labour intensive especially for high-throughput applications. We aimed to establish and evaluate a rapid and sensitive direct quantitative polymerase chain reaction (qPCR) protocol for the detection of P. gingivalis without DNA extraction which is suitable for large-scale epidemiological studies. Paired gingival swab samples from 192 subjects undergoing general medical examinations were analysed using two direct and one extraction-based qPCR assays for P. gingivalis. Tris-EDTA buffer-based direct qPCR (TE-direct qPCR), lysis-based direct qPCR (lysis-direct qPCR) and DNA extraction-based qPCR (kit-qPCR) were used, respectively, in 192, 132 and 60 of these samples for quantification of P. gingivalis. The sensitivity and specificity of TE-direct qPCR was 95.24% and 100% compared with lysis-direct qPCR, which was 100% and 97.30% when compared with kit-qPCR; TE-direct qPCR had an almost perfect agreement with lysis-direct qPCR (κ = 0.954) and kit-qPCR (κ = 0.965). Moreover, the assay time used for TE-direct qPCR was 1.5 h. In conclusion, the TE-direct qPCR assay is a simple and efficient method for the quantification of oral P. gingivalis and showed high sensitivity and specificity compared with routine qPCR.

Fluid motion has two well-known fundamental processes: the vector transverse process characterized by vorticity, and the scalar longitudinal process consisting of a sound mode and an entropy mode, characterized by dilatation and thermodynamic variables. The existing theories for the sound mode involve the multi-variable issue and its associated difficulty of source identification. In this paper, we define the source of sound inside the fluid by the objective causality inherent in dynamic equations relevant to a longitudinal process, which naturally favours the material time-rate operator $D/Dt$ rather than the local time-rate operator $\unicode[STIX]{x2202}/\unicode[STIX]{x2202}t$, and describes the sound mode by inhomogeneous advective wave equations. The sources of sound physical production inside the fluid are then examined at two levels. For the conventional formulation in terms of thermodynamic variables at the first level, we show that the universal kinematic source can be condensed to a scalar invariant of the surface deformation tensor. Further, in the formulation in terms of dilatation at the second level, we find that the sound mode in viscous and heat-conducting flow has sources from rich nonlinear couplings of vorticity, entropy and surface deformation, which cannot be disclosed at the first level. Preliminary numerical demonstration of the theoretical findings is made for two typical compressible flows, i.e. the interaction of two corotating Gaussian vortices and the unsteady type IV shock/shock interaction. The results obtained in this study provide a new theoretical basis for, and physical insight into, understanding various nonlinear longitudinal processes and the interactions therein.

As an epigenetic modification, DNA methylation may reflect the interaction between genetic and environmental factors in the development of schizophrenia (SCZ). Catechol-O-methyltransferase (COMT) gene is a promising candidate gene of SCZ. In the present study, we investigate the association of COMT methylation with the risk of SCZ using bisulfite pyrosequencing technology. Significant association between DNA methylation of COMT and the risk of SCZ is identified (P = 1.618e−007). A breakdown analysis by gender shows that the significance is driven by males (P = 3.310e−009), but not by females. DNA methylation of COMT is not significantly associated with SCZ clinical phenotypes, including p300 and cysteine level. No interaction is found between COMT genotypes and the percent methylation of this gene. Receiver operating characteristic (ROC) curve shows that DNA methylation of COMT is able to predict the SCZ risk in males (area under curve [AUC] = 0.802, P = 1.91e−007). The current study indicates the clinical value of COMT methylation as a potential male-specific biomarker in SCZ diagnosis.

Feathers play a critical role in thermoregulation and directly influence poultry production. Poor feathering adversely affects living appearance and carcass quality, thus reducing profits. However, producers tend to ignore the importance of feather development and do not know the laws of feather growth and development. The objective of this study was to fit growth curves to describe the growth and development of feathers in yellow-feathered broilers during the embryonic and posthatching periods using different nonlinear functions (Gompertz, logistic and Bertalanffy). Feather mass and length were determined during the embryonic development and posthatching stages to identify which growth model most accurately described the feather growth pattern. The results showed that chick embryos began to grow feathers at approximately embryonic (E) day 10, and the feathers grew rapidly from E13 to E17. There was little change from E17 to the day of hatching (DOH). During the embryonic period, the Gompertz function (Y = 798.48e−203 431exp(−0.87t), Akaike’s information criterion (AIC) = −0.950 × 103, Bayesian information criterion (BIC) = −0.711 × 103 and mean square error (MSE) = 559.308) provided the best fit for the feather growth curve compared with the other two functions. After hatching, feather mass and length changed little from the DOH to day (D) 14, increased rapidly from D21 to D91 and then grew slowly after D91. The first stage of feather molting occurred from 2 to 3 weeks of age when the down feathers were mostly shed and replaced with juvenile feathers, and the second stage occurred at approximately 13 to 15 weeks of age. The three nonlinear functions could overall fit the feather growth curve well, but the Bertalanffy model (Y = 116.88 × (1−0.86e−0.02t)3, AIC = 1.065 × 105, BIC = 1.077 × 105 and MSE = 11.308) showed the highest degree of fit among the models. Therefore, the Gompertz model exhibited the best goodness of fit for the feather growth curve during the embryonic development, while the Bertalanffy model was the most suitable model due to its accurate ability to predict the growth and development of feathers during the growth period, which is an important commercial characteristic of yellow-feathered chickens.

Muscle fiber characteristics comprise a set of complex traits that influence the meat quality and lean meat production of livestock. However, the genetic and biological mechanisms regulating muscle fiber characteristics are largely unknown in pigs. Based on a genome-wide association study (GWAS) performed on 421 Large White × Min pig F2 individuals presenting well-characterized phenotypes, this work aimed to detect genome variations and candidate genes for five muscle fiber characteristics: percentage of type I fibers (FIB1P), percentage of type IIA fibers (FIB2AP), percentage of type IIB fibers (FIB2BP), diameter of muscle fibers (DIAMF) and number of muscle fibers per unit area (NUMMF). The GWAS used the Illumina Porcine SNP60K genotypic data, which were analyzed by a mixed model. Seven and 10 single nucleotide polymorphisms (SNPs) were significantly associated with DIAMF and NUMMF, respectively (P < 1.10E-06); no SNP was significantly associated with FIB1P, FIB2AP or FIB2B. For DIAMF, the significant SNPs on chromosome 4 were located in the previously reported quantitative trait loci (QTL) interval. Because the significant SNPs on chromosome 6 were not mapped in the previously reported QTL interval, a putative novel QTL was suggested for this locus. None of the previously reported QTL intervals on chromosomes 6 and 14 harbored significant SNPs for NUMMF; thus, new potential QTLs on these two chromosomes are suggested in the present work. The most significant SNPs associated with DIAMF (ALGA0025682) and NUMMF (MARC0046984) explained 12.02% and 11.59% of the phenotypic variation of these traits, respectively. In addition, both SNPs were validated as associated with DIAMF and NUMMF in Beijing Black pigs (P < 0.01). Some candidate genes or non-coding RNAs, such as solute carrier family 44 member 5 and miR-124a-1 for DIAMF, and coiled-coil serine rich protein 2 for NUMMF, were identified based on their close location to the significant SNPs. This study revealed some genome-wide association variants for muscle fiber characteristics, and it provides valuable information to discover the genetic mechanisms controlling these traits in pigs.

The COllaborative project of Development of Anthropometrical measures in Twins (CODATwins) project is a large international collaborative effort to analyze individual-level phenotype data from twins in multiple cohorts from different environments. The main objective is to study factors that modify genetic and environmental variation of height, body mass index (BMI, kg/m2) and size at birth, and additionally to address other research questions such as long-term consequences of birth size. The project started in 2013 and is open to all twin projects in the world having height and weight measures on twins with information on zygosity. Thus far, 54 twin projects from 24 countries have provided individual-level data. The CODATwins database includes 489,981 twin individuals (228,635 complete twin pairs). Since many twin cohorts have collected longitudinal data, there is a total of 1,049,785 height and weight observations. For many cohorts, we also have information on birth weight and length, own smoking behavior and own or parental education. We found that the heritability estimates of height and BMI systematically changed from infancy to old age. Remarkably, only minor differences in the heritability estimates were found across cultural–geographic regions, measurement time and birth cohort for height and BMI. In addition to genetic epidemiological studies, we looked at associations of height and BMI with education, birth weight and smoking status. Within-family analyses examined differences within same-sex and opposite-sex dizygotic twins in birth size and later development. The CODATwins project demonstrates the feasibility and value of international collaboration to address gene-by-exposure interactions that require large sample sizes and address the effects of different exposures across time, geographical regions and socioeconomic status.

Glyphodes pyloalis Walker (Lepidoptera: Pyralididae) is a common pest in sericulture and has developed resistance to different insecticides. However, the mechanisms involved in insecticide resistance of G. pyloalis are poorly understood. Here, we present the first whole-transcriptome analysis of differential expression genes in insecticide-resistant and susceptible G. pyloalis. Clustering and enrichment analysis of DEGs revealed several biological pathways and enriched Gene Ontology terms were related to detoxification or insecticide resistance. Genes involved in insecticide metabolic processes, including cytochrome P450, glutathione S-transferases and carboxylesterase, were identified in the larval midgut of G. pyloalis. Among them, CYP324A19, CYP304F17, CYP6AW1, CYP6AB10, GSTs5, and AChE-like were significantly increased after propoxur treatment, while CYP324A19, CCE001c, and AChE-like were significantly induced by phoxim, suggesting that these genes were involved in insecticide metabolism. Furthermore, the sequence variation analysis identified 21 single nucleotide polymorphisms within CYP9A20, CYP6AB47, and CYP6AW1. Our findings reveal many candidate genes related to insecticide resistance of G. pyloalis. These results provide novel insights into insecticide resistance and facilitate the development of insecticides with greater specificity to G. pyloalis.

Although application of organic fertilizers has become a recommended way for developing sustainable agriculture, it is still unclear whether above-ground and below-ground crops have similar responses to chemical fertilizers (CF) and organic manure (OM) under the same farming conditions. The current study investigated soil quality and crop yield response to fertilization of a double-cropping system with rapeseed (above-ground) and sweet potato (below-ground) in an infertile red soil for 2 years (2014–16). Three fertilizer treatments were compared, including CF, OM and organic manure plus chemical fertilizer (MCF). Organic fertilizers (OM and MCF) increased the yield of both above- and below-ground crops and improved soil biochemical properties significantly. The current study also found that soil-chemical properties were the most important and direct factors in increasing crop yields. Also, crop yield was affected indirectly by soil-biological properties, because no significant effects of soil-biological activities on yield were detected after controlling the positive effects of soil-chemical properties. Since organic fertilizers could not only increase crop yield, but also improve soil nutrients and microbial activities efficiently and continuously, OM application is a reliable agricultural practice for both above- and below-ground crops in the red soils of China.