The COVID-19 pandemic led to an initial increase in the incidence of carbapenem-resistant Enterobacterales (CRE) from clinical cultures in South-East Asia hospitals, which was unsustained as the pandemic progressed. Conversely, there was a decrease in CRE incidence from surveillance cultures and overall combined incidence. Further studies are needed for future pandemic preparedness.

Hepatitis E virus infection is a major cause of acute hepatitis, typically self-limiting but occasionally leading to liver failure. Understanding disease progression factors could inform prevention strategies. This study aimed to analyse the characteristics of a large cohort of hospitalised hepatitis E patients in Tianjin, China, and explore factors influencing their progression to liver failure. A total of 1279 hospitalised patients with hepatitis E were included in this cross-sectional study in Tianjin, China. Student's t-test and the Mann–Whitney U-test were used for comparisons. Multiple logistic regression analysis was used to explore the association. Among these 1279 patients, 107 (8.4%) developed liver failure. Patients with diabetes mellitus (DM) (95% confidence interval [CI] 1.150–2.887, p = 0.011), liver cirrhosis (95% [CI] 2.229–7.224, p < 0.001), and hepatitis B (95% [CI] 1.159–4.512, p = 0.017) were more likely to progress to liver failure. Hepatitis E patients with comorbid DM, liver cirrhosis, or hepatitis B virus co-infection have higher risks of developing liver failure. Hepatitis E vaccination may be recommended for these vulnerable patients to curb disease severity.

Purple nutsedge (Cyperus rotundus L.) is a globally distributed noxious weed that poses a significant challenge for control due to its fast and efficient propagation through the tuber, which is the primary reproductive organ. Gibberellic acid (GA3) has proven to be crucial for tuberization in tuberous plants. Therefore, understanding the relationship between GA3 and tuber development and propagation of C. rotundus will provide valuable information for controlling this weed. This study shows that the GA3 content decreases with tuber development, which corresponds to lower expression of bioactive GA3 synthesis genes (CrGA20ox, two CrGA3ox genes) and two upregulated GA3 catabolism genes (CrGA2ox genes), indicating that GA3 is involved in tuber development. Simultaneously, the expression of two CrDELLA genes and CrGID1 declines with tuber growth and decreased GA3, and yeast two-hybrid assays confirm that the GA3 signaling is DELLA-dependent. Furthermore, exogenous application of GA3 markedly reduces the number and the width of tubers and represses the growth of the tuber chain, further confirming the negative impact that GA3 has on tuber development and propagation. Taken together, these results demonstrate that GA3 is involved in tuber development and regulated by the DELLA-dependent pathway in C. rotundus and plays a negative role in tuber development and propagation.

The mean flow behaviour of a turbulent boundary layer over rough walls is expected to exhibit symmetries that govern the flow dynamics. In particular, when roughness elements are arranged in a spanwise symmetric manner, the mean flow above them should also exhibit spanwise symmetry. This symmetrical consideration has garnered substantial empirical support. We conduct direct numerical simulations (DNS) of flow over aligned cube arrays to test such symmetry considerations further. We vary the surface coverage density from 0.25 % to 6.25 %, and employ an averaging time of about 100 large-eddy turnover times, which is longer than the typical averaging time in prior DNS studies of rough-wall boundary layers. The results suggest the presence of spanwise asymmetry in the mean flow. Specifically, we observe the development of a prominent secondary vortex on one side of the cubical roughness, accompanied by a relatively smaller secondary vortex on the other side. This asymmetry becomes most pronounced when the surface coverage density is approximately 0.59 %, and diminishes as the coverage density approaches either a low or a high value. We also establish that this mean flow asymmetry is robust across variations in the domain size, the initial condition, and the placement of the cubes in the spanwise direction.

Despite observed ethnic differences in eating patterns and obesity, evidence in China is limited. This study examined ethnic differences in eating patterns and their associations with weight outcomes among multi-ethnic adults in West China. A cross-sectional survey collected self-reported data on demographics, eating behaviours, weight and height in 2021. Principal component analysis and multivariate regression were conducted to identify eating patterns and examine their associations with weight outcomes. In total, 4407 subjects aged ≥ 18 years were recruited across seven provinces in West China. Four eating patterns were identified: ‘meat-lover’ – characterised by frequent consumption of meat and dairy products, ‘indulgent’ – by frequent intakes of added salt, sugar, alcohol and pickled food, ‘diversified-eating’ – by frequently consuming food with diversified cooking methods and eating out and ‘nutri-health-concerned’ – by good food hygiene behaviours and reading food labels. Ethnic differences in eating patterns were observed. Compared with Han, Hui were less likely to exhibit meat-lover or diversified-eating patterns; Tibetans were less likely to have meat-lover or nutri-health-concerned patterns; Mongolians were more likely to have indulgent pattern. BMI was positively associated with meat-lover pattern in both genders (exp(β): 1·029; 95 % CI: 1·001, 1·058 for men; 1·018; 1·000, 1·036 for women) and negatively associated with nutri-health-concerned pattern in women (0·983; 0·966, 1·000). Mongolians were two times more likely to be overweight/obese than Han (OR: 3·126; 1·688, 5·790). Considerable ethnic differences existed in eating patterns in West China. Mongolians were more likely to be overweight/obese, which was associated with their indulgent eating patterns. Ethnic-specific healthy eating intervention programs are needed.

The logarithmic law of the wall does not capture the mean flow when a boundary layer is subjected to a strong pressure gradient. In such a boundary layer, the mean flow is affected by the spatio-temporal history of the imposed pressure gradient; and accounting for history effects remains a challenge. This work aims to develop a universal mean flow scaling for boundary layers subjected to arbitrary adverse or/and favourable pressure gradients. We derive from the Navier–Stokes equation a velocity transformation that accounts for the history effects and maps the mean flow to the canonical law of the wall. The transformation is tested against channel flows with a suddenly imposed adverse or favourable pressure gradient, boundary layer flows subjected to an adverse pressure gradient, and Couette–Poiseuille flows with a streamwise pressure gradient. It is found that the transformed velocity profiles follow closely the equilibrium law of the wall.

In this study, the mitochondrial genome of Eulaelaps silvestris, which parasitizes Apodemus chevrieri, was sequenced and assembled to fill the gap in understanding the molecular evolution of the genus Eulaelaps. The E. silvestris mitochondrial genome is a double-stranded DNA molecule with a length of 14 882 bp, with a distinct AT preference for base composition and a notably higher AT content than GC content. The arrangement between genes is relatively compact, with a total of 10 gene intergenic regions and 12 gene overlap regions. All protein-coding genes had a typical ATN initiation codon, and only 2 protein-coding genes had an incomplete termination codon T. Out of the 13 protein-coding genes, the 5 most frequently used codons ended in A/U, with only 1 codon ending in G/C had an relative synonymous codon usage value >1. Except for trnS1 and trnS2, which lacked the D arm, all other tRNAs were able to form a typical cloverleaf structure; and there were a total of 38 mismatches in the folding process of tRNA genes. Unlike the gene arrangement order of the arthropod hypothetical ancestor, the E. silvestris mitochondrial genome underwent fewer rearrangements, mainly near tRNA genes and control regions. Both the maximum likelihood tree and the Bayesian tree showed that the family Haemogamasidae is most closely related to the family Dermanyssidae. The results not only provide a theoretical basis for studying the phylogenetic relationships of the genus Eulaelaps, but also provide molecular evidence that the family Haemogamasidae does not belong to the subfamily Laelapidae.

The predictive methods of tool wear are usually based on different algorithm predictors, different source data, and different sensing devices for remaining useful life (RUL). In general, it has challenges to model and ensure all of the cutting conditions that are suitable in the actual cutting process for sustainable manufacturing. In order to overcome the doing large amount of experimental data and predict different tool RULs, this study combines the analytical force modeling, the back-propagation neural network (BPNN) machine learning, and the current sensor which all are integrated in smart machine box (SMB) to realize the practical RUL prediction for on-line and real-time applications. The analytical model of the cutting force coefficients of shear and ploughing was established from average cutting forces, it could reduce the experimental number and predict the different cutting conditions. In general, the loading current of the cutting tool from a spindle motor is relatively easier acquired than the resultant forces. Thus, the loading currents of the spindle are used to train and predict the cutting forces using the BPNN model during intelligent manufacturing. The SMB architecture mainly performed the autonomous actions based on the edge layer, the fog layer, and the cloud layer via the TCP/IP, the MQTT protocol, and the unified communication library. Results showed that a predictive error for the ends of the tool life is about 3–10% that are based on the calculating of the cumulative current ratio.

In this work, we present a high-power, high-repetition-rate, all-fiber femtosecond laser system operating at 1.5 $\unicode{x3bc}$m. This all-fiber laser system can deliver femtosecond pulses at a fundamental repetition rate of 10.6 GHz with an average output power of 106.4 W – the highest average power reported so far from an all-fiber femtosecond laser at 1.5 $\unicode{x3bc}$m, to the best of our knowledge. By utilizing the soliton-effect-based pulse compression effect with optimized pre-chirping dispersion, the amplified pulses are compressed to 239 fs in an all-fiber configuration. Empowered by such a high-power ultrafast fiber laser system, we further explore the nonlinear interaction among transverse modes LP01, LP11 and LP21 that are expected to potentially exist in fiber laser systems using large-mode-area fibers. The intermodal modulational instability is theoretically investigated and subsequently identified in our experiments. Such a high-power all-fiber ultrafast laser without bulky free-space optics is anticipated to be a promising laser source for applications that specifically require compact and robust operation.

The carbonate-hosted Pb–Zn deposits in the Sichuan–Yunnan–Guizhou (SYG) triangle region are important Indosinian deposits in South China. The Tianbaoshan deposit is a typical large Pb–Zn deposit in the SYG area and occurs as pipe-like type, hosted by Sinian dolostone. It contains ∼26 Mt Zn–Pb ore (7.76–10.09 % Zn, 1.28–1.50 % Pb and 93.6 g t−1 Ag) and >0.1 Mt Cu ore (2.55 % Cu). In this study, the detailed mineral textures, mineral chemical and sulphur isotopic compositions of the various sulphides have been analysed to constrain the abnormal enrichment mechanism and mineralization relationship. Four mineralization stages have been recognized: Stage 1, minor early pyrite (Py1) with relics and infill of intergranular dolomite or quartz grains; Stage 2, Cu mineralization with coarse-grained, elliptical crystal chalcopyrite (Cp1); (3) Stage 3, Zn mineralization with dark fine-grained sphalerite (Sph1) and light coarse-grained sphalerite (Sph2); and (4) Stage 4, as represented by a quartz–calcite assemblage with galena, minor pyrite (Py2) and chalcopyrite (Cp2). The petrography of the sulphide minerals (Py1, Cp1, Sph1 and Sph2) demonstrates a mutual inclusion relationship. The nature of this relationship from core to rim and their similar sulphur isotope values (5.5–8.3 ‰) indicates a single sulphur source, suggesting that the different mineralization types are the result of different stages of a continuous hydrothermal system. Sphalerite geothermometer study suggests that sphalerite in the Tianbaoshan deposit formed in a low-temperature (<200 °C) hydrothermal system. The low concentrations of Mn and In, low In/Ge ratios and high Fe/Cd ratios in the sphalerite are consistent with those of Mississippi Valley-type (MVT) deposits, but different from those of magmatism-related deposits (e.g. epithermal, skarn and VMS deposits). The positive δ34S values for Py1 (5.1–7.9 ‰), Cp1 (5.1–7.2 ‰), Sph1 (4.7–7.4 ‰), Sph2 (3.9–8.7 ‰), Py2 (4.4–9.3 ‰) and Cp2 (5.0–6.8 ‰) indicate a sulphur source from thermochemical reduction of coeval seawater sulphate. Widely developed dissolved textures (caverns and breccias) with massive sulphide infillings and deformed host rock remnants suggest that replacement of host dolostones by ore fluids was volumetrically significant and the ore formed nearly simultaneously with the cavities. The Tianbaoshan deposit is a typical MVT deposit, which resulted from mixing of a H2S-rich fluid and a metal-rich fluid, with thermochemical sulphate reduction occurring before ore precipitation rather than during ore precipitation.

In this paper, we consider the existence and stability of singular patterns in a fractional Ginzburg–Landau equation with a mean field. We prove the existence of three types of singular steady-state patterns (double fronts, single spikes, and double spikes) by solving their respective consistency conditions. In the case of single spikes, we prove the stability of single small spike solution for sufficiently large spatial period by studying an explicit non-local eigenvalue problem which is equivalent to the original eigenvalue problem. For the other solutions, we prove the instability by using the variational characterisation of eigenvalues. Finally, we present the results of some numerical computations of spike solutions based on the finite difference methods of Crank–Nicolson and Adams–Bashforth.

Angiostrongylus cantonensis causes a form of parasitic meningitis in humans. Albendazole (ABZ) kills nematode larvae in the brain. However, dead larvae can trigger a severe inflammatory response, resulting in brain damage. Accumulating evidence suggests that calycosin represents a potential anti-inflammatory therapeutic candidate. In this study, we investigated the combined effects of ABZ and calycosin in angiostrongyliasis caused by A. cantonensis in BALB/c mice. Inflammatory mediators (such as phospho-nuclear factor-κB, cyclooxygenase-2, matrix metalloproteinase-9, tumour necrosis factor-α and interleukin-1β) are associated with the development of meningitis and immune inflammatory reactions. We found that A. cantonensis significantly induces inflammatory mediator production and increases the blood–brain barrier (BBB) permeability. However, co-administration of both ABZ and calycosin markedly suppressed meningitis and inflammatory mediator production and decreased the BBB permeability compared to treatment with a single drug. Furthermore, calycosin and ABZ plus calycosin treatment facilitated production of the antioxidant haem oxygenase-1 (HO-1). Moreover, co-therapy with ABZ and calycosin failed to mitigate angiostrongyliasis in the presence of tin-protoporphyrin IX, an HO-1-specific inhibitor. This finding suggests that the beneficial effects of ABZ plus calycosin treatment on the regulation of inflammation are mediated by the modulation of HO-1 activation. The present results provide new insights into the treatment of human angiostrongyliasis using co-therapy with ABZ and calycosin.

The great demographic pressure brings tremendous volume of beef demand. The key to solve this problem is the growth and development of Chinese cattle. In order to find molecular markers conducive to the growth and development of Chinese cattle, sequencing was used to determine the position of copy number variations (CNVs), bioinformatics analysis was used to predict the function of ZNF146 gene, real-time fluorescent quantitative polymerase chain reaction (qPCR) was used for CNV genotyping and one-way analysis of variance was used for association analysis. The results showed that there exists CNV in Chr 18: 47225201-47229600 (5.0.1 version) of ZNF146 gene through the early sequencing results in the laboratory and predicted ZNF146 gene was expressed in liver, skeletal muscle and breast cells, and was amplified or overexpressed in pancreatic cancer, which promoted the development of tumour through bioinformatics. Therefore, it is predicted that ZNF146 gene affects the proliferation of muscle cells, and then affects the growth and development of cattle. Furthermore, CNV genotyping of ZNF146 gene was three types (deletion type, normal type and duplication type) by Real-time fluorescent quantitative PCR (qPCR). The association analysis results showed that ZNF146-CNV was significantly correlated with rump length of Qinchuan cattle, hucklebone width of Jiaxian red cattle and heart girth of Yunling cattle. From the above results, ZNF146-CNV had a significant effect on growth traits, which provided an important candidate molecular marker for growth and development of Chinese cattle.

Late Palaeozoic igneous rock associations in response to subduction, accretion, and final closure of the eastern Palaeo-Asian Ocean play a significant role in understanding the geodynamic evolution of the southeastern Central Asian Orogenic Belt. Previous studies have identified a Permian arc magmatic belt associated with the southward-dipping subduction of the eastern Palaeo-Asian Ocean along the Solonker–Changchun suture zone. The genetic mechanism and associated geodynamic settings are of great importance in deciphering the evolution of the eastern Palaeo-Asian Ocean. This paper presents zircon U–Pb–Hf isotope and whole-rock geochemical analyses for a suite of magmatic rocks including the early Permian diorite porphyrites (ca. 281.0 Ma), andesites (ca. 276 Ma) and rhyolites (ca. 275 Ma) in the Kulun region. The diorite porphyrites and andesites have high SiO2 and total alkali contents, and low MgO contents and Mg no. values, with enrichments in large ion lithophile elements and depletions in high-field-strength elements. These geochemical characteristics, together with low-Sr and high-Yb contents, a weak concave-upward shape of middle rare earth elements and negative Eu anomalies, suggest that these intermediate igneous rocks were generated by partial melting of amphibolitic lower crust at a crustal depth of 30–40 km. The rhyolites have heterogeneous isotopic compositions, with ϵHf(t) values and TDM2 ages of –20.8 to +0.5 and 3578∼1494 Ma, implying that they were likely derived from partial melting of a mixed source dominated by recycled ancient crust with minor juvenile crustal materials. The rhyolites show potassic affinity with relatively high K2O and very low Na2O, which was attributed to liquid immiscibility of felsic magma and subsequent limited fractional crystallization of plagioclase. The regional igneous associations, metamorphic events, and coeval sedimentary rocks along the Solonker–Changchun suture zone indicate that the early Permian igneous rocks were formed in an active continental arc environment in response to southward subduction of the eastern Palaeo-Asian Ocean.

The mixing-layer analogy is due to Raupach, Finnigan & Brunet (Boundary-Layer Meteorol., vol. 25, 1996, pp. 351–382). In the analogy, the flow in the roughness sublayer of a homogeneous deep vegetation canopy boundary layer is analogous to a plane mixing layer rather than a surface layer. Evidence for the analogy includes the inflected velocity profile, which resembles the velocity profile in a plane mixing layer, and, most notably, the following estimate as a result of the Kelvin–Helmholtz instability: $\varLambda _x=8.1L_s$, where $\varLambda _x$ is the spacing of the large-scale eddies, and $L_s$ is the shear length. The mixing-layer analogy has been very successful in vegetation canopy flow research, but has received only limited support in urban-canopy flow research. This work revisits Raupach et al.'s mixing-layer analogy, and we present the evidence for the mixing-layer analogy in urban-canopy flows: the exponential velocity profile in the canopy layer, i.e. $(U-U_c)/(U_h-U_c)=\exp (z/L_m)$, and $L_m\sim [(U_h/U_c-1)(U_h/U_c+3)]^{-1}$. Here, $z$ is the vertical coordinate, $L_m$ is the attenuation length and is a measure of the largest eddy in the canopy layer, $U_h$ is the wind speed at the canopy crest and $U_c$ is the velocity in the inactive layer. We conduct direct numerical simulations of various deep homogeneous urban-canopy flows and test the above two scalings. We also discuss why Raupach et al.'s analogy has not seen as many successes in urban-canopy flows as in vegetation canopy flows.