Laser-driven ion acceleration is well established using solid targets mainly in the target normal sheath acceleration regime. To follow the increasing repetition rate available on high-intensity lasers, the use of high-density gas targets has been explored in the past decade. When interacting with targets reaching densities close to the critical one, the laser pulse can trigger different acceleration mechanisms such as Collisionless Shock Acceleration (CSA) or hole boring. Particle-in-cell simulations using ideal target profiles show that CSA can accelerate a collimated, narrow energy spread and few hundreds of megaelectronvolts ion beam on the laser axis. Nevertheless, in real experiments, the laser will not only interact with an overcritical, thin plasma slab with sharp density gradients, but also with lower density regions surrounding the core of the gas jet, extending to several hundreds of micrometres. The interaction of the laser with these lower density wings will lead to nonlinear effects that will reduce the available energy to drive the shock in the high-density region of the target. Optically tailoring this target could mitigate that issue. Recent experiments conducted on different laser facilities aimed at testing several tailoring configurations. We first tested a scheme with a copropagating picosecond prepulse to create a lower density plasma channel to facilitate the propagation of the main pulse, while the second one was a transverse tailoring driven by nanosecond laser pulses to generate blast waves and form a high-density plasma slab. The main results will be presented here and the methods compared.

The advent of high-energy short-pulse laser beams poses new problems related to radiation protection. The radiation generated in experiments using multipetawatt laser systems leads to prompt doses and potentially to the activation of the materials within the interaction chamber and the experimental hall. Despite many new PW laser facilities are nowadays entering into operation, this question has received little attention until now. In this paper, we evaluate the radiological effects induced by the operation of a high-power laser facility. Two working regimes are considered related to the production of hard X-rays and energetic protons. The methodology is general and may be applied for the design of experiments with any high-power laser systems.

Fusion energy research is delivering impressive new results emerging from different infrastructures and industrial devices evolving rapidly from ideas to proof-of-principle demonstration and aiming at the conceptual design of reactors for the production of electricity. A major milestone has recently been announced in laser fusion by the Lawrence Livermore National Laboratory and is giving new thrust to laser-fusion energy research worldwide. Here we discuss how these circumstances strongly suggest the need for a European intermediate-energy facility dedicated to the physics and technology of laser-fusion ignition, the physics of fusion materials and advanced technologies for high-repetition-rate, high-average-power broadband lasers. We believe that the participation of the broader scientific community and the increased engagement of industry, in partnership with research and academic institutions, make most timely the construction of this infrastructure of extreme scientific attractiveness.

The design and the early commissioning of the ELI-Beamlines laser facility’s 30 J, 30 fs, 10 Hz HAPLS (High-repetition-rate Advanced Petawatt Laser System) beam transport (BT) system to the P3 target chamber are described in detail. It is the world’s first and with 54 m length, the longest distance high average power petawatt (PW) BT system ever built. It connects the HAPLS pulse compressor via the injector periscope with the 4.5 m diameter P3 target chamber of the plasma physics group in hall E3. It is the largest target chamber of the facility and was connected first to the BT system. The major engineering challenges are the required high vibration stability mirror support structures, the high pointing stability optomechanics as well as the required levels for chemical and particle cleanliness of the vacuum vessels to preserve the high laser damage threshold of the dielectrically coated high-power mirrors. A first commissioning experiment at low pulse energy shows the full functionality of the BT system to P3 and the novel experimental infrastructure.

A developing application of laser-driven currents is the generation of magnetic fields of picosecond–nanosecond duration with magnitudes exceeding $B=10~\text{T}$. Single-loop and helical coil targets can direct laser-driven discharge currents along wires to generate spatially uniform, quasi-static magnetic fields on the millimetre scale. Here, we present proton deflectometry across two axes of a single-loop coil ranging from 1 to 2 mm in diameter. Comparison with proton tracking simulations shows that measured magnetic fields are the result of kiloampere currents in the coil and electric charges distributed around the coil target. Using this dual-axis platform for proton deflectometry, robust measurements can be made of the evolution of magnetic fields in a capacitor coil target.

Laser–plasma interaction (LPI) at intensities $10^{15}{-}10^{16}~\text{W}\cdot \text{cm}^{-2}$ is dominated by parametric instabilities which can be responsible for a significant amount of non-collisional absorption and generate large fluxes of high-energy nonthermal electrons. Such a regime is of paramount importance for inertial confinement fusion (ICF) and in particular for the shock ignition scheme. In this paper we report on an experiment carried out at the Prague Asterix Laser System (PALS) facility to investigate the extent and time history of stimulated Raman scattering (SRS) and two-plasmon decay (TPD) instabilities, driven by the interaction of an infrared laser pulse at an intensity ${\sim}1.2\times 10^{16}~\text{W}\cdot \text{cm}^{-2}$ with a ${\sim}100~\unicode[STIX]{x03BC}\text{m}$ scalelength plasma produced from irradiation of a flat plastic target. The laser pulse duration (300 ps) and the high value of plasma temperature (${\sim}4~\text{keV}$) expected from hydrodynamic simulations make these results interesting for a deeper understanding of LPI in shock ignition conditions. Experimental results show that absolute TPD/SRS, driven at a quarter of the critical density, and convective SRS, driven at lower plasma densities, are well separated in time, with absolute instabilities driven at early times of interaction and convective backward SRS emerging at the laser peak and persisting all over the tail of the pulse. Side-scattering SRS, driven at low plasma densities, is also clearly observed. Experimental results are compared to fully kinetic large-scale, two-dimensional simulations. Particle-in-cell results, beyond reproducing the framework delineated by the experimental measurements, reveal the importance of filamentation instability in ruling the onset of SRS and stimulated Brillouin scattering instabilities and confirm the crucial role of collisionless absorption in the LPI energy balance.

Processes of laser energy absorption and electron heating in an expanding plasma in the range of irradiances $I\unicode[STIX]{x1D706}^{2}=10^{15}{-}10^{16}~\text{W}\,\cdot \,\unicode[STIX]{x03BC}\text{m}^{2}/\text{cm}^{2}$ are studied with the aid of kinetic simulations. The results show a strong reflection due to stimulated Brillouin scattering and a significant collisionless absorption related to stimulated Raman scattering near and below the quarter critical density. Also presented are parametric decay instability and resonant excitation of plasma waves near the critical density. All these processes result in the excitation of high-amplitude electron plasma waves and electron acceleration. The spectrum of scattered radiation is significantly modified by secondary parametric processes, which provide information on the spatial localization of nonlinear absorption and hot electron characteristics. The considered domain of laser and plasma parameters is relevant for the shock ignition scheme of inertial confinement fusion.

Measurements are reported of the target neutralization current, the target charge, and the tangential component of the magnetic field generated as a result of laser–target interaction by pulses with the energy in the range of 45–92 mJ on target and the pulse duration from 39 to 1000 fs. The experiment was performed at the Eclipse facility in CELIA, Bordeaux. The aim of the experiment was to extend investigations performed for the thick (mm scale) targets to the case of thin (μm thickness) targets in a way that would allow for a straightforward comparison of the results. We found that thin foil targets tend to generate 20–50% higher neutralization current and the target charge than the thick targets. The measurement of the tangential component of the magnetic field had shown that the initial spike is dominated by the 1 ns pulse consistent with the 1 ns pulse of the neutralization current, but there are some differences between targets of different types on sub-ns scale, which is an effect going beyond a simple picture of the target acting as an antenna. The sub-ns structure appears to be reproducible to surprising degree. We found that there is in general a linear correlation between the maximum value of the magnetic field and the maximum neutralization current, which supports the target-antenna picture, except for pulses 100s of fs long.

Laser-produced high-energy-density plasmas may contain strong magnetic fields that affect the energy transport, which can be nonlocal. Models which describe the magnetized nonlocal transport are formally complicated and based on many approximations. This paper presents a more straightforward approach to the description of the electron transport in this regime, based on the extension of a reduced entropic model. The calculated magnetized heat fluxes are compared with the known asymptotic limits and applied for studying of a magnetized nonlocal plasma thermalization.

The method of nonlinear complex geometrical optics (NCGO) is proposed in this paper for description of the evolution of a spatially narrow Gaussian beam (GB) in an inhomogeneous nonlinear plasma. NCGO method deals with first-order ordinary differential equations for the complex curvature of the wave front and for GB amplitude and for second-order ordinary differential equation for GB width. Thus, NCGO simplifies the description of GB diffraction and self-focusing effects as compared to the known methods of plasma physics and this way it can be assumed to be attractive and comprehensive approach in problems of plasma heating by electromagnetic waves. Moreover, we demonstrate in this paper some regularity for nonlinear inhomogeneous plasma in the framework of which central ray of a GB is not subjected to nonlinear refraction within NCGO method boundary applicability. On the contrary, the beam width, wave front curvature, and GB amplitude are modified by diffraction and self-focusing processes. General properties of the beam propagation are illustrated with results of numerical modeling for two particular cases: GB diffraction and self-focusing along curvilinear trajectory with torsion in axially symmetric plasma column and GB reflection from nonlinear inhomogeneous plasma layer. We prove in this paper that NCGO is new effective method of plasma physics, which can be applied for improvement of ray tracing techniques and plasma diagnostics.

Fast-electron beam stopping mechanisms in media ranging from solid to warm dense matter have been investigated experimentally and numerically. Laser-driven fast electrons have been transported through solid Al targets and shock-compressed Al and plastic foam targets. Their propagation has been diagnosed via rear-side optical self-emission and Kα X-rays from tracer layers. Comparison between measurements and simulations shows that the transition from collision-dominated to resistive field-dominated energy loss occurs for a fast-electron current density ~5 × 1011 A cm−2. The respective increases in the stopping power with target density and resistivity have been detected in each regime. Self-guided propagation over 200μm has been observed in radially compressed targets due to ~1kT magnetic fields generated by resistivity gradients at the converging shock front.

Scattered emission from the laser plasma created in shell target heating experiments using the Delfin-1 laser has been studied. It is shown that the ω0 spherical harmonics can be used to determine both the plasma temperature in the nc/4 region and also the plasma flow through this region.

The theory of magnetic field generation due to the interaction of short relativistic laser pulses with underdense plasmas has been developed. The magnetic field is generated due to the inverse Faraday effect occurring witha circularly polarized laser pulse. The spatial distribution of the magnetic field is investigated. It is shown that the magnetic field magnitude depends on the relationship between the laser beam radius and the plasma skin-depth.

Interactions of laser driven plasma jets with He and Ar gas puffs was investigated experimentally by means of three-frame interferometric/shadowgraphic system and three-frame X-ray pinhole camera. A defocused iodine laser beam using the Prague Asterix Laser System (PALS) interacting with massive planar Cu targets generated high-speed well-collimated plasma jets. The PALS third harmonic (0.438 µm), with pulse duration of 250 ps (full width at half maximum), and energy of 100 J was employed in two irradiation geometries: with an incidence normal to the target surface and with an oblique one (30° with respect to the target normal), in order to minimize the heating of the ambient gas by the laser beam. The results of these interaction experiments, in particular, those obtained in case of the oblique incidence geometry, are presented and discussed. They show the effect of the double shock formation in ambient gases: starting by the ablative plasma action, followed by that of the jet.

New perspectives have been opened up in the field of laser–matter interactions due to recent advances in laser technology, leading to laser systems of high contrast and extreme intensity values, where the frontier of maximum intensity is pushed now to about 1022 W/cm2. Many striking phenomena such as laser-acceleration of electrons up to the GeV level, fast moving ions with kinetic energies of several 10s of MeV, as well as nuclear physics experiments have already actuated a broad variety of theoretical as well as experimental studies. Also highly relativistic effects like laser induced electron-positron pair production are under discussion. All these activities have considerably stimulated the progress in understanding the underlying physical processes and possible applications. This article reviews recent advances in the experimental techniques as well as the associated plasma dynamics studies at relativistic intensities performed at the Max-Born-Institute (MBI). Interactions of a laser pulse at intensities above 1019 W/cm2 with water- and heavy-water droplets, as well as, with thin foils are discussed. Rear and front side acceleration mechanisms, particle dynamics inside the dense target, proton source characteristics, strong modulations in proton and deuteron emission spectra, and finally generation of quasi-monoenergetic deuteron bursts are the topics covered in the article.

The forthcoming laser installations related to inertial confinement fusion, Laser Mégajoule (LMJ) (France) and National Ignition Facility (NIF) (USA), require multidimensional numerical simulation tools for interpreting current experimental data and to perform predictive modeling for future experiments. Simulations of macroscopic plasma volumes of the order of 1 mm3 and laser exposure times of the order of hundreds of picoseconds are necessary. We present recent developments in the PARAX code towards this goal. The laser field is treated in a standard paraxial approximation in three dimensions. The plasma response is described by single-fluid, two-temperature, fully nonlinear hydrodynamical equations in the plane transverse to the laser propagation axis. The code also accounts for the dominant nonlocal transport terms in spectral form originating from a linearized solution to the Fokker–Planck equation. The simulations of interest are hohlraum plasmas in the case of indirect drive or the plasma corona for direct drive. Recent experimental results on plasma-induced smoothing of RPP laser beams are used to validate the code.

This issue of Laser and Particle Beams includes papers presented at the “Workshop on Simulations of Ultra Intense Laser Beams Interaction with Matter” held in Bordeaux, France, from 14 to 16 April, 2003. This workshop was organized jointly by the Polytechnic University (Madrid, Spain), University of Bordeaux 1 (Talence, France), University of Milano-Bicocca (Milan, Italy), and Commissariat à l'Energie Atomique (CEA, France), sponsored by the European Science Foundation (ESF), University of Bordeaux 1, and CEA.