To save content items to your account,
please confirm that you agree to abide by our usage policies.
If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account.
Find out more about saving content to .
To save content items to your Kindle, first ensure firstname.lastname@example.org
is added to your Approved Personal Document E-mail List under your Personal Document Settings
on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part
of your Kindle email address below.
Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations.
‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi.
‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
High-energy protons are generated by focusing an ultrashort pulsed
high intensity laser at the Advanced Photon Research Center, JAERI-Kansai
onto thin (thickness <10 μm) Tantalum targets. The laser
intensities are about 4 × 1018 W/cm2. The
prepulse level of the laser pulse is measured with combination of a PIN
photo diode and a cross correlator and is less than 10−6.
A quarter-wave plate is installed into the laser beam line to create
circularly polarized pulses. Collimated high energy protons are observed
with CH coated Tantalum targets irradiated with the circularly polarized
laser pulses. The beam divergence of the generated proton beam is measured
with a CR-39 track detector and is about 6 mrad.
Electron microscopy observations of α–ZrP whiskers with the NaCl structure, grown by chemical vapor deposition at 1300 °C, showed that there exists a hexagonal structure region (a = 0.369 nm and c = 1.248 nm) near the surface of the whiskers. High-resolution lattice image observations revealed that the method of stacking the eight-layered hexagonal structure is different from the reported hexagonal β–ZrP. In addition to the eight-layered structure, 12-layered and 16-layered structures were also observed, indicating a variety of ZrP polymorphisms.
Snowdrifting processes and the wind-velocity profiles around a collector and a blower snow fence were investigated in a cold wind tunnel. The purpose was to ascertain the effect of wind direction on drift control by snow fences. Three different cases were studied for both types of snow fence, and the resultant snowdrifts were compared. In the first case, the snow fence was perpendicular to the wind direction. In the second and third cases, it was tilted by 30° and 45°. When the collector snow fence was tilted, the amounts of snowdrift were much less than when the fence was perpendicular to the wind direction, because the area with low wind velocity was reduced to half behind the tilted fence. On the other hand, the blowing effect of the blower snow fence increased when it was set up at an angle to the wind direction. It is necessary to investigate the position where the blown snow is deposited by the tilted blower snow fence.
Email your librarian or administrator to recommend adding this to your organisation's collection.