Unoccupied aerial application systems (UAAS) are gaining popularity for weed management to increase applicator safety and to deliver herbicide treatments where treatment sites limit ground-based spray equipment. Several studies have documented UAAS application strategies and procedures for weed control in terrestrial settings, yet literature describing remote spray technology for use in aquatics remains limited. Currently, applicators seek guidance for UAAS deployment for aquatic weed management to overcome site access restrictions, deal with environmental limitations, and improve ground-based applicator safety in hazardous treatment scenarios. In the present case studies, we evaluate a consumer-available UAAS to deliver the herbicide, florpyrauxifen-benzyl, as both foliar and directed in-water spray applications. The first case study showed that the invasive floating-leaved plant, yellow floating heart, was controlled 80% to 99% by 6 wk after treatment (WAT) following UAAS foliar herbicide treatments. The second case study demonstrated that UAAS directed in-water herbicide application reduced variable-leaf watermilfoil visible plant material by 94% at 5 WAT. Likewise, directed in-water applications from UAAS eliminated the need to deploy watercraft, which improved overall operational efficiency. Data from both case studies indicate that UAAS can provide an effective and efficient treatment strategy for floating-leaved and submersed plant control among common herbicide treatment scenarios. Future integration of UAAS in aquatic weed control programs is encouraged, especially among smaller treatment sites (≤4 ha) or where access limits traditional spray operations.

Expanding the current aquatic herbicide portfolio, reducing total spray volumes, or remotely delivering herbicide using novel spray technologies could improve management opportunities targeting invasive aquatic plants, where options are more limited. However, research on giant salvinia (Salvinia molesta Mitchell) response to foliar herbicide applications at carrier volumes ≤140 L ha−1 is incomplete. Likewise, no data exist documenting S. molesta control with unoccupied aerial application systems (UAAS). Following the recent >100-ha incursion of S. molesta in Gapway Swamp, NC, a case study was developed to provide guidance for ongoing management efforts. In total, three field trials evaluated registered aquatic and experimental herbicides using a 140 L ha−1 carrier volume. Select foliar applications from UAAS were also evaluated. Results at 8 wk after treatment (WAT) indicated the experimental protoporphyrinogen oxidase inhibitor, PPO-699-01 (424 g ai ha−1), in combination with endothall dipotassium salt (2,370 g ae ha−1) provided 78% visual control, whereas control when PPO-699-01 (212 g ai ha−1) was applied alone was lower at 35%. Evaluations also showed diquat (3,136 g ai ha−1) alone, glyphosate (4,539 g ae ha−1) alone, and metsulfuron-methyl (42 g ai ha−1) alone achieved 86% to 94% visual plant control at 8 WAT. Sequential foliar applications of diquat, flumioxazin (210 g ai ha−1), and carfentrazone (67 g ai ha−1) at 6 wk following exposure to in-water fluridone treatments were no longer efficacious by 6 WAT due to plant regrowth. Carfentrazone applications made from a backpack sprayer displayed greater control than applications made with UAAS deploying identical carrier volumes at 2 WAT; however, neither application method provided effective control at 8 WAT. Additional field validation is needed to further guide management direction of S. molesta control using low carrier volume foliar applications.

The current assays to confirm herbicide resistance can be time- and labor-intensive (dose–response) or require a skill set/technical equipment (genetic sequencing). Stakeholders could benefit from a rapid assay to confirm herbicide-resistant weeds to ensure sustainable crop production. Because protoporphyrinogen oxidase (PPO)-inhibiting herbicides rapidly interfere with chlorophyll production/integrity; we propose a new, rapid assay utilizing spectral reflectance to confirm resistance. Leaf disks were excised from two PPO-inhibiting herbicide-resistant (target-site [TSR] and non–target site [NTSR]) and herbicide-susceptible redroot pigweed (Amaranthus retroflexus L.) populations and placed into a 24-well plate containing different concentrations (0 to 10 mM) of fomesafen for 48 h. A multispectral sensor captured images from the red (668 nm), green (560 nm), blue (475 nm), and red edge (717 nm) wavebands after a 48-h incubation period. The green leaf index (GLI) was utilized to determine spectral reflectance ratios of the treated leaf disks. Clear differences of spectral reflectance were observed in the red edge waveband for all populations treated with the 10 mM concentration in the dose–response assays. Differences of spectral reflectance were observed for the NTSR population compared with the TSR and susceptible populations treated with the 10 mM concentration in the green waveband and the GLI in the dose–response assay. Leaf disks from the aforementioned A. retroflexus populations and two additional susceptible populations were subjected to a similar assay with the discriminating concentration (10 mM). Spectral reflectance was different between the PPO-inhibiting herbicide-resistant and herbicide-susceptible populations in the red, blue, and green wavebands. Spectral reflectance was not distinctive between the populations in the red edge waveband and the GLI. The results provide a basis for rapidly (∼48 h) detecting PPO-inhibiting herbicide-resistant A. retroflexus via spectral reflectance. Discrimination between TSR and NTSR populations was possible only in the dose–response assay, but the assay still has utility in distinguishing herbicide-resistant plants from herbicide-susceptible plants.

This study provides the first comprehensive reconstruction of the dynamics of Iceberg Glacier, located on western Axel Heiberg Island, and reveals detailed observations of a complete surge for the first time in the Canadian Arctic. Historical aerial photographs, declassified intelligence satellite photographs, optical satellite imagery and synthetic aperture radar data were used to quantify changes in terminus position, ice velocity and glacier thickness since the 1950s. A surge initiated at the terminus in 1981 and terminated in 2003, suggesting a 22-year active phase. High surface velocities, reaching ~2300 m a−1 in 1991, were accompanied by a maximum terminus advance of >7 km and a large transfer of mass down-glacier, causing significant median trunk-wide surface elevation changes attaining >3 ± 1 m a−1. We suggest that the retreat from a pinning point, flotation of the terminus, the removal of sea-ice from the ice front, and an increase in subglacial meltwater availability from relatively high air temperatures in 1981 likely contributed to surge initiation. The ensuing quiescent period has seen a continual decrease in surface flow rates to an average centreline velocity of 11.5 m a−1 in 2020–21, a gradual steepening of the glacier surface and a > 2.5 km terminus retreat.

Glufosinate is an effective postemergence herbicide, and overreliance on this herbicide for weed control is likely to increase and select for glufosinate-resistant weeds. Common assays to confirm herbicide resistance are dose–response and molecular sequencing techniques; both can require significant time, labor, unique technical equipment, and a specialized skillset to perform. As an alternative, we propose an image-based approach that uses a relatively inexpensive multispectral sensor designed for unmanned aerial vehicles to measure and quantify surface reflectance from glufosinate-treated leaf disks. Leaf disks were excised from a glufosinate-resistant and glufosinate-susceptible corn (Zea mays L.), cotton (Gossypium hirsutum L.), and soybean [Glycine max (L.) Merr.] varieties and placed into a 24-well plate containing eight different concentrations (0 to 10 mM) of glufosinate for 48 h. Multispectral images were collected after the 48-h incubation period across five discrete wave bands: blue (475 to 507 nm), green (560 to 587 nm), red (668to 682 nm), red edge (717 to 729 nm), and near infrared (842 to 899 nm). The green leaf index (GLI; a metric to measure chlorophyll content) was utilized to determine relationships between measured reflectance from the tested wave bands from the treated leaf disks and the glufosinate concentration. Clear differences of spectral reflectance were observed between the corn, cotton, and soybean leaf disks of the glufosinate-resistant and glufosinate-susceptible varieties at the 10 mM concentration for select wave bands and GLI. Leaf disks from two additional glufosinate-resistant and glufosinate-susceptible varieties of each crop were subjected to a similar assay with two concentrations: 0 and 10 mM. No differences of spectral reflectance were observed from the corn and soybean varieties in all wave bands and the GLI. The leaf disks of the glufosinate-resistant and glufosinate-susceptible cotton varieties were spectrally distinct in the green, blue, and red-edge wave bands. The results provide a basis for rapidly detecting glufosinate-resistant plants via spectral reflectance. Future research will need to determine the glufosinate concentrations, useful wave bands, and susceptible/resistant thresholds for weeds that evolve resistance.

Remotely sensed land surface temperature (LST) data, such as the Moderate Resolution Imaging Spectroradiometer (MODIS) LST thermal infrared products, are useful for monitoring surface processes on the Greenland Ice Sheet in remote areas but must be validated to ensure accuracy. Using data from the Programme for Monitoring the Greenland Ice Sheet (PROMICE), we conducted a MODIS LST validation (MOD/MYD11 C6 swath level product) using radiometric in-situ skin temperature records from 2014 to 2017 over 17 PROMICE sites mostly in the ice sheet's ablation zone. There is a significant cold bias in MODIS LST when compared to PROMICE skin temperature, particularly when PROMICE records temperatures below 0°C (mean bias: 2.4 ± 0.01°C mean ± standard error, RMSE = 3.2°C). Multiple linear regression analysis reveals the difference between MODIS LST and PROMICE skin temperature is larger at lower temperatures, lower latent heat fluxes and higher specific humidity. Our results confirm the presence of a progressive cold bias in the MODIS LST that should be considered in use of this product, and we identify and corroborate areas for ongoing algorithm development.

Astrophysics Telescope for Large Area Spectroscopy Probe is a concept for a National Aeronautics and Space Administration probe-class space mission that will achieve ground-breaking science in the fields of galaxy evolution, cosmology, Milky Way, and the Solar System. It is the follow-up space mission to Wide Field Infrared Survey Telescope (WFIRST), boosting its scientific return by obtaining deep 1–4 μm slit spectroscopy for ∼70% of all galaxies imaged by the ∼2 000 deg2 WFIRST High Latitude Survey at z > 0.5. Astrophysics Telescope for Large Area Spectroscopy will measure accurate and precise redshifts for ∼200 M galaxies out to z < 7, and deliver spectra that enable a wide range of diagnostic studies of the physical properties of galaxies over most of cosmic history. Astrophysics Telescope for Large Area Spectroscopy Probe and WFIRST together will produce a 3D map of the Universe over 2 000 deg2, the definitive data sets for studying galaxy evolution, probing dark matter, dark energy and modifications of General Relativity, and quantifying the 3D structure and stellar content of the Milky Way. Astrophysics Telescope for Large Area Spectroscopy Probe science spans four broad categories: (1) Revolutionising galaxy evolution studies by tracing the relation between galaxies and dark matter from galaxy groups to cosmic voids and filaments, from the epoch of reionisation through the peak era of galaxy assembly; (2) Opening a new window into the dark Universe by weighing the dark matter filaments using 3D weak lensing with spectroscopic redshifts, and obtaining definitive measurements of dark energy and modification of General Relativity using galaxy clustering; (3) Probing the Milky Way’s dust-enshrouded regions, reaching the far side of our Galaxy; and (4) Exploring the formation history of the outer Solar System by characterising Kuiper Belt Objects. Astrophysics Telescope for Large Area Spectroscopy Probe is a 1.5 m telescope with a field of view of 0.4 deg2, and uses digital micro-mirror devices as slit selectors. It has a spectroscopic resolution of R = 1 000, and a wavelength range of 1–4 μm. The lack of slit spectroscopy from space over a wide field of view is the obvious gap in current and planned future space missions; Astrophysics Telescope for Large Area Spectroscopy fills this big gap with an unprecedented spectroscopic capability based on digital micro-mirror devices (with an estimated spectroscopic multiplex factor greater than 5 000). Astrophysics Telescope for Large Area Spectroscopy is designed to fit within the National Aeronautics and Space Administration probe-class space mission cost envelope; it has a single instrument, a telescope aperture that allows for a lighter launch vehicle, and mature technology (we have identified a path for digital micro-mirror devices to reach Technology Readiness Level 6 within 2 yr). Astrophysics Telescope for Large Area Spectroscopy Probe will lead to transformative science over the entire range of astrophysics: from galaxy evolution to the dark Universe, from Solar System objects to the dusty regions of the Milky Way.

Methods for identifying relevant policy impacts for valuation in benefit-cost analyses (BCAs) have received relatively little attention in academic research, applied policy analyses, and guidance documents. In this paper, we develop a systematic, transparent, and replicable process that draws upon information contained in records of Congressional hearings to identify relevant policy impacts for valuation in a BCA. Our approach involves classifying – and subsequently analyzing – statements from witnesses testifying in Congressional hearings on the topic of the BCA. By using Congressional hearings as the basis for our approach, we are identifying potential policy impacts from information provided during the very process the BCA is intended to inform. However, because this approach is quite resource-intensive and would be somewhat burdensome for agencies to implement, it may be best applied in the academic realm, with identified impacts resulting from such applications then made available to agency personnel for potential inclusion in BCAs. Using the case of the Glen Canyon Dam, we demonstrate the approach and its resulting improvements in the quality and transparency of the BCA it was intended to inform.

During the past decade, solar power has experienced transformative price declines, enabling it to grow to supply 1% of U.S. and world electricity. Addressing grid integration challenges, increasing grid flexibility, and further reducing cost will enable even greater potential for solar as an electricity source.

During the past decade, solar power has experienced transformative price declines, enabling it to become a viable electricity source that is supplying 1% of U.S. and world electricity. Further cost reductions are expected to enable substantially greater solar deployment, and new Department of Energy cost targets for utility-scale photovoltaics (PV) and concentrating solar thermal power are $0.03/kW h and $0.05/kW h by 2030, respectively. However, cost reductions are no longer the only significant challenge for PV—addressing grid integration challenges and increasing grid flexibility are critical as the penetration of PV electricity on the grid increases. The development of low cost energy storage is particularly synergistic with low cost PV, as cost declines in each technology are expected to support greater market opportunities for the other.

Studies were conducted to evaluate 14C-aminocyclopyrachlor absorption and translocation in alligatorweed, waterhyacinth, and waterlettuce. Alligatorweed plants were treated at the seven-node stage, waterhyacinth was treated at the five-leaf stage, and waterlettuce was treated at the eight-leaf stage. All plants were pretreated with nonlabeled aminocyclopyrachlor at 0.14 kg ai ha−1 with 1% (v/v) methylated seed oil (MSO). 14C-aminocyclopyrachlor was then applied to a protected leaf, and plants were harvested at 1, 2, 4, 12, 24, and 96 h after treatment (HAT). Radioactivity was determined in the treated leaf, shoots above treated leaf, shoots below treated leaf, roots, and growing solution. Absorption was rapid in all species and reached a maximum of 73, 72, and 73% of applied radioactivity for alligatorweed, waterhyacinth, and waterlettuce, respectively. In alligatorweed at 96 HAT, 43% of absorbed carbon-14 (14C) was translocated to shoots above the treated leaf and 17% was translocated to lower shoot tissue. In waterhyacinth at 96 HAT, 56% of absorbed 14C remained in the treated leaf, whereas 14 and 13% were found in parts above and below the treated leaf, respectively. In waterlettuce at 96 HAT, 50 and 33% of absorbed radioactivity was located above the treated leaf and in the growing solution, respectively. The low recovery of aminocyclopyrachlor in alligatorweed roots and growing solution might explain regrowth potential after herbicide treatment. These results also indicate that the lack of waterlettuce control with aminocyclopyrachlor is not due to reduced absorption or translocation.

Synthetic auxin herbicides are commonly used in forage, pasture, range, and turfgrass settings for dicotyledonous weed control. Aminocyclopyrachlor (AMCP) is a newly developed pyrimidine carboxylic acid with a chemical structure and mode of action similar to the pyridine carboxylic acids—aminopyralid, clopyralid, and picloram. Injury to sensitive dicotyledonous plants has been observed following exposure to monocotyledonous plant material previously treated with pyridine compounds. The absorption, translocation, and metabolism of AMCP has been documented in susceptible broadleaf weeds; however, no information is available, to our knowledge, regarding AMCP fate in tolerant Poaceae, which may serve as the vector for off-target plant injury. Based on this premise, research was conducted to characterize absorption, translocation, and metabolism of AMCP in tall fescue. 14C-AMCP was applied to single tiller tall fescue plant foliage under controlled laboratory conditions at North Carolina State University (Raleigh, NC). Radiation was quantified in leaf wash, treated leaf, foliage, crown, roots, and root exudates at 3, 12, 24, 48, 96, and 192 h after treatment (HAT). 14C-AMCP was rapidly absorbed by tall fescue, reaching 38 and 68% at 3 and 48 HAT, respectively. Translocation of 14C-AMCP was limited to the foliage, which reached maximum translocation (34%) at 96 HAT. Most of the recovered 14C-AMCP remained in the leaf wash, treated leaf, or foliage, whereas minimal radiation was detected in the crown, roots, or root exudates throughout the 192-h period. No AMCP metabolism was observed in tall fescue through the 192 HAT. These data suggest AMCP applied to tall fescue can remain bioavailable, and mishandling treated plant material could result in off-target injury.

The anticipated release of EnlistTM cotton, corn, and soybean cultivars likely will increase the use of 2,4-D, raising concerns over potential injury to susceptible cotton. An experiment was conducted at 12 locations over 2013 and 2014 to determine the impact of 2,4-D at rates simulating drift (2 g ae ha−1) and tank contamination (40 g ae ha−1) on cotton during six different growth stages. Growth stages at application included four leaf (4-lf), nine leaf (9-lf), first bloom (FB), FB + 2 wk, FB + 4 wk, and FB + 6 wk. Locations were grouped according to percent yield loss compared to the nontreated check (NTC), with group I having the least yield loss and group III having the most. Epinasty from 2,4-D was more pronounced with applications during vegetative growth stages. Importantly, yield loss did not correlate with visual symptomology, but more closely followed effects on boll number. The contamination rate at 9-lf, FB, or FB + 2 wk had the greatest effect across locations, reducing the number of bolls per plant when compared to the NTC, with no effect when applied at FB + 4 wk or later. A reduction of boll number was not detectable with the drift rate except in group III when applied at the FB stage. Yield was influenced by 2,4-D rate and stage of cotton growth. Over all locations, loss in yield of greater than 20% occurred at 5 of 12 locations when the drift rate was applied between 4-lf and FB + 2 wk (highest impact at FB). For the contamination rate, yield loss was observed at all 12 locations; averaged over these locations yield loss ranged from 7 to 66% across all growth stages. Results suggest the greatest yield impact from 2,4-D occurs between 9-lf and FB + 2 wk, and the level of impact is influenced by 2,4-D rate, crop growth stage, and environmental conditions.

Effective control techniques for pale swallowwort (PSW), an invasive herbaceous vine of old fields and forest understories, are limited. We conducted a 3-yr cutting and herbicide study on an adjacent old-field and forest understory site near Ithaca, NY, for control of PSW. Plants in experimental plots were cut in early July and cut again or sprayed in late August for two seasons with the isopropylamine salt of glyphosate, or one of two rates (low or high) of either triclopyr triethylamine salt (i.e., SL, SH) or triclopyr butoxyethyl ester (EL, EH). The herbicide treatments were effective in reducing PSW cover, plant (stem) density, and aboveground biomass in the old-field site, but in several cases, only after 2 yr of cutting plus herbicide application. Only the cutting plus SH treatment did not reduce PSW cover relative to the unmanaged control in the forest understory and no treatment reduced biomass. In general, the cutting plus EH treatment was most effective in reducing PSW stem densities in the forest site. The most effective herbicide treatments differed between sites. Cutting plus EH reduced PSW cover by 84% and stem density (> 5 cm) by 86% in the old-field site. Cutting plus SH effectively decreased long and short (≤ 5 cm) stem densities by 86 and 96%, respectively. Cutting plants twice during each of two seasons increased PSW cover by 301% and density of stems > 5 cm by 73% at this site. In the forest site, cutting plus glyphosate, or cutting plus EH or cutting plus SL and EL resulted in the greatest reductions in PSW cover (80, 76, 66, and 56%, respectively). Cover in plots cut twice per year decreased by 19%. The EH or SL treatments decreased long-stem densities by 78 and 71%, respectively. The EH treatment decreased short-stem density by 37%. These findings suggest that integrated techniques may control PSW but that effective management strategies may be habitat constrained.

Field and laboratory studies were conducted at Stoneville, MS, from 1996 to 1998 to determine the influence of subsoiling (SS) and conventional tillage (CT) of a Sharkey clay soil on microbial characteristics and herbicide degradation. Soil samples obtained from imazaquin-treated and nontreated plots from the soybean row and interrow position were analyzed. Because only the row position is actually disturbed by SS, a comparison of row and interrow position on the parameter was conducted. Imazaquin (preemergence, 140 g ai ha−1) had no effect on microbial populations, microbial enzyme activity (fluorescein diacetate [FDA] hydrolysis and triphenyl-tetrazolium chloride [TTC] dehydrogenase), and organic carbon content. Estimates of microbial activity based on FDA hydrolysis and TTC dehydrogenase activity indicated greater activity under CT; however, microbial biomass and organic carbon were not affected by tillage or row position. A laboratory study assessed the degradation of carboxyl- and ring-labeled 2,4-D as influenced by tillage and row position. Soils from CT plots had an initially higher mineralization rate of 14C carboxyl-labeled 2,4-D compared to soils from SS plots; however, no effect of tillage or row position was observed on the cumulative amount of 14CO2 evolved 14 d after treatment (DAT) in 1996 and 18 DAT in 1998. In studies with ring-labeled 2,4-D, a higher 14CO2 evolution was detected in soils obtained from SS plots, regardless of row position, whereas a greater amount of radioactivity was observed in the unextractable fraction from CT soils. Because differences in 2,4-D mineralization between tillage regimes were minimal, adoption of SS as a tillage practice for heavy clay soils in the Mississippi Delta may have a limited effect on microbial characteristics and biodegradation of soil-applied herbicides.

Growing interest in the use of CO2 as a feedstock for fuel generation has led to increased interest in solar CO2 electrolysis for renewable fuel generation which has a variety of applications ranging from providing renewable sources for energy-dense carbon fuels, to curbing high-density emissions from power plants, industries and automobiles. The challenges of integrated solar-to-carbon fuel converters, where the photovoltaic (PV) material is immersed in the electrolyte, are well-known: the need for unique PV cell designs; material incompatibility; corrosion; and optical losses. In this paper, a PV-electrolysis system is presented, where a flow-cell electrolyzer is power-matched to a high-performance solar PV module array which has two system design advantages: 1) use of standard PV cells external to the electrolyzer, which allows de-coupling the design, fabrication and operation of the PV system from that of the electrolyzer; and 2) enabling optimization of the PV configuration to maximize power coupling efficiency to the specific electrolyzer Tafel curve, with or without the use of electronic power-conditioning devices. The implemented system resulted in a peak SFE of 6.5%, a competitive solar-to-fuel efficiency (SFE) figure to those reported in literature.

Various methods have been used to estimate risk indices with historical data. An industry perception of increasing milk price risk over time provides a standard for evaluating several techniques used to measure historical risk. Risk measures from a regression model and an ARIMA model were consistent with the perception of increasing risk.

A financial training program designed by Cooperative Extension specialists was provided to over 2,000 USDA/FSA borrowers from the Northeast during the period 1994–1999. Key to the success of the workshops was an in-depth, user-friendly curriculum that evolved over time, eventually replacing satellite-feed instruction with pre-taped videos. Cluster analysis classified nearly 70% of workshop participants as “Low Finance Priority” or “Low Finance Knowledge.” Farmers in these clusters received a relatively greater educational benefit from the program than those not in these clusters. Impact analysis indicated that perceived annual gain in farm net worth from application of workshop tools ranged from approximately $5,000 to $10,000. The training addressed the needs of producers typically isolated from Cooperative Extension because the workshop was the only extension program attended that year by nearly two-thirds of them.