The quenching of cluster satellite galaxies is inextricably linked to the suppression of their cold interstellar medium (ISM) by environmental mechanisms. While the removal of neutral atomic hydrogen (H i) at large radii is well studied, how the environment impacts the remaining gas in the centres of galaxies, which are dominated by molecular gas, is less clear. Using new observations from the Virgo Environment traced in CO survey (VERTICO) and archival H i data, we study the H i and molecular gas within the optical discs of Virgo cluster galaxies on 1.2-kpc scales with spatially resolved scaling relations between stellar ($\Sigma_{\star}$), H i ($\Sigma_{\text{H}\,{\small\text{I}}}$), and molecular gas ($\Sigma_{\text{mol}}$) surface densities. Adopting H i deficiency as a measure of environmental impact, we find evidence that, in addition to removing the H i at large radii, the cluster processes also lower the average $\Sigma_{\text{H}\,{\small\text{I}}}$ of the remaining gas even in the central $1.2\,$kpc. The impact on molecular gas is comparatively weaker than on the H i, and we show that the lower $\Sigma_{\text{mol}}$ gas is removed first. In the most H i-deficient galaxies, however, we find evidence that environmental processes reduce the typical $\Sigma_{\text{mol}}$ of the remaining gas by nearly a factor of 3. We find no evidence for environment-driven elevation of $\Sigma_{\text{H}\,{\small\text{I}}}$ or $\Sigma_{\text{mol}}$ in H i-deficient galaxies. Using the ratio of $\Sigma_{\text{mol}}$-to-$\Sigma_{\text{H}\,{\small\text{I}}}$ in individual regions, we show that changes in the ISM physical conditions, estimated using the total gas surface density and midplane hydrostatic pressure, cannot explain the observed reduction in molecular gas content. Instead, we suggest that direct stripping of the molecular gas is required to explain our results.

The Hierarchical Taxonomy of Psychopathology (HiTOP) has emerged out of the quantitative approach to psychiatric nosology. This approach identifies psychopathology constructs based on patterns of co-variation among signs and symptoms. The initial HiTOP model, which was published in 2017, is based on a large literature that spans decades of research. HiTOP is a living model that undergoes revision as new data become available. Here we discuss advantages and practical considerations of using this system in psychiatric practice and research. We especially highlight limitations of HiTOP and ongoing efforts to address them. We describe differences and similarities between HiTOP and existing diagnostic systems. Next, we review the types of evidence that informed development of HiTOP, including populations in which it has been studied and data on its validity. The paper also describes how HiTOP can facilitate research on genetic and environmental causes of psychopathology as well as the search for neurobiologic mechanisms and novel treatments. Furthermore, we consider implications for public health programs and prevention of mental disorders. We also review data on clinical utility and illustrate clinical application of HiTOP. Importantly, the model is based on measures and practices that are already used widely in clinical settings. HiTOP offers a way to organize and formalize these techniques. This model already can contribute to progress in psychiatry and complement traditional nosologies. Moreover, HiTOP seeks to facilitate research on linkages between phenotypes and biological processes, which may enable construction of a system that encompasses both biomarkers and precise clinical description.

Direct ink writing of silicone elastomers enables printing with precise control of porosity and mechanical properties of ordered cellular solids, suitable for shock absorption and stress mitigation applications. With the ability to manipulate structure and feedstock stiffness, the design space becomes challenging to parse to obtain a solution producing a desired mechanical response. Here, we derive an analytical design approach for a specific architecture. Results from finite element simulations and quasi-static mechanical tests of two different parallel strand architectures were analyzed to understand the structure-property relationships under uniaxial compression. Combining effective stiffness-density scaling with least squares optimization of the stress responses yielded general response curves parameterized by resin modulus and strand spacing. An analytical expression of these curves serves as a reduced order model, which, when optimized, provides a rapid design capability for filament-based 3D printed structures. As a demonstration, the optimal design of a face-centered tetragonal architecture is computed that satisfies prescribed minimum and maximum load constraints.

Medusahead is one of the most problematic rangeland weeds in the western United States. In previous studies, prescribed burning has been used successfully to control medusahead in some situations, but burning has failed in other circumstances. In this study, trials were conducted using the same protocol at four locations in central to northern California to evaluate plant community response to two consecutive years of summer burning and to determine the conditions resulting in successful medusahead control. During 2002 through 2003 large-scale experiments were established at two low-elevation, warm-winter sites (Fresno and Yolo counties) and two higher elevation, cool-winter sites (Siskiyou and Modoc counties). Plant species cover was estimated using point-intercept transects, and biomass samples were taken in each plot. After 2 yr of burning, medusahead cover was reduced by 99, 96, and 93% for Fresno, Yolo, and Siskiyou counties, respectively, compared to unburned control plots. Other annual grasses were also reduced, but less severely, and broadleaf species increased at all three sites. In contrast, 2 yr of burning resulted in a 55% increase in medusahead at the coolest winter site in Modoc County. In the second season after the final burn, medusahead cover remained low in burned plots at Fresno and Yolo counties (1 and 12% of cover in unburned controls, respectively), but at the Siskiyou site medusahead recovered to 45% relative to untreated controls. The success of prescribed burning was correlated with biomass of annual grasses, excluding medusahead, preceding a burn treatment. It is hypothesized that greater production of combustible forage resulted in increased fire intensity and greater seed mortality in exposed inflorescences. These results demonstrate that burning can be an effective control strategy for medusahead in low elevation, warm-winter areas characterized by high annual grass biomass production, but may not be successful in semiarid cool winter areas.

WideStrike® Acala cotton is a two-gene, in-plant trait that provides broad-spectrum and season-long control of lepidopteran insect pests, and the varieties available in California also have resistance to glyphosate. There have been indications that WideStrike cotton has some glufosinate tolerance as well, so the level of tolerance to glufosinate needed to be ascertained. A 2-yr (2008 and 2009) study was conducted in California to evaluate the potential crop injury caused by three different rates (0.59, 0.88, and 1.76 kg ai ha−1) of glufosinate–ammonium at four different growth stages (cotyledon, 2-node, 5- to 6-node, and 18- to 19-node stages) of WideStrike Acala cotton. The effects of these treatments on the cotton plants and yield were closely monitored. Glyphosate at 1.54 kg ae ha−1 was applied at all cotton growth stages as a standard application, and a nontreated control was included. The greatest level of injury (58%) was observed with the highest rate of glufosinate applied at both the cotyledon and the two-node stage of cotton. However, injury was less than 10% following glufosinate at 0.59 kg ha−1 applied at the 18- to 19-node stage. The level of injury increased with the higher application rate of glufosinate at all crop growth stages. In 2008 and 2009, the glufosinate treatments had no effect on cotton lint yield. Therefore, the study showed that glufosinate can be applied safely topically at 0.59 kg ha−1 at the cotyledon- to 2-node stage or as POST-directed spray between the 5- to 19-node stages. Although injury occurred at this rate, the plants recovered within 2 to 3 wk of the treatment. Increasing glufosinate rates beyond 0.59 kg ha−1 can increase the possibility of greater crop injury.

Invasive annual grasses, such as medusahead, can reduce forage production capacity and interfere with revegetation projects in California rangelands. Because of the taxonomic similarity to other more desirable grasses, achieving selective control of invasive annual grasses can be difficult. In selectivity trials conducted in Yolo and Siskiyou counties, CA, the herbicide imazapic gave control of many nonnative annual grasses yet provided some level of selectivity to specific perennial grasses used in revegetation projects throughout the western United States. The selectivity difference between newly seeded perennial and annual grasses was greater with PRE applications than with POST treatments. Both perennial and annual grasses within the tribe Hordeae were more tolerant to imazapic than other grass species. In addition, field experiments were conducted at three sites in northern California (Yuba, Yolo, and Lassen counties) and one in southern Oregon (Lake County) to test the response of imazapic to varying management conditions. Imazapic was applied PRE in fall (and also spring in Lake County) at rates from 35 to 210 g/ha on undisturbed rangeland, in comparison with rangeland cleared of standing plant material and thatch by either tillage, mowing and raking, or burning. Imazapic generally showed enhanced weed control when applied following disturbance. Rates as low as 70 g/ha, if combined with thatch removal, provided significant suppression of medusahead. In addition, disturbance alone generally reduced medusahead cover in the following year. Although imazapic showed potential for control of medusahead and other annual grasses, its selectivity window was relatively narrow.

In North America, terrestrial records of biodiversity and climate change that span Marine Oxygen Isotope Stage (MIS) 5 are rare. Where found, they provide insight into how the coupling of the ocean–atmosphere system is manifested in biotic and environmental records and how the biosphere responds to climate change. In 2010–2011, construction at Ziegler Reservoir near Snowmass Village, Colorado (USA) revealed a nearly continuous, lacustrine/wetland sedimentary sequence that preserved evidence of past plant communities between ~140 and 55 ka, including all of MIS 5. At an elevation of 2705 m, the Ziegler Reservoir fossil site also contained thousands of well-preserved bones of late Pleistocene megafauna, including mastodons, mammoths, ground sloths, horses, camels, deer, bison, black bear, coyotes, and bighorn sheep. In addition, the site contained more than 26,000 bones from at least 30 species of small animals including salamanders, otters, muskrats, minks, rabbits, beavers, frogs, lizards, snakes, fish, and birds. The combination of macro- and micro-vertebrates, invertebrates, terrestrial and aquatic plant macrofossils, a detailed pollen record, and a robust, directly dated stratigraphic framework shows that high-elevation ecosystems in the Rocky Mountains of Colorado are climatically sensitive and varied dramatically throughout MIS 5.

This paper describes the system architecture of a newly constructed radio telescope – the Boolardy engineering test array, which is a prototype of the Australian square kilometre array pathfinder telescope. Phased array feed technology is used to form multiple simultaneous beams per antenna, providing astronomers with unprecedented survey speed. The test array described here is a six-antenna interferometer, fitted with prototype signal processing hardware capable of forming at least nine dual-polarisation beams simultaneously, allowing several square degrees to be imaged in a single pointed observation. The main purpose of the test array is to develop beamforming and wide-field calibration methods for use with the full telescope, but it will also be capable of limited early science demonstrations.