The Glastonbury Lake Village in Somerset, UK, is made up of 90 mounds comprising 40 roundhouses. Excavations between 1892 and 1907 revealed Iron Age structural and material remains unparalleled in Western Europe. The settlement's exact chronology, however, has remained uncertain. Here, the authors present a programme of radiocarbon and dendrochronological dating and chronological modelling on samples from recent excavations. The results indicate that the site was founded in the early second century cal BC, with the last structures being built just over a century later. This new, robust chronology can be used to date a wide range of associated material culture, and complements chronologies established for other Iron Age sites.

Radiocarbon (14C) ages cannot provide absolutely dated chronologies for archaeological or paleoenvironmental studies directly but must be converted to calendar age equivalents using a calibration curve compensating for fluctuations in atmospheric 14C concentration. Although calibration curves are constructed from independently dated archives, they invariably require revision as new data become available and our understanding of the Earth system improves. In this volume the international 14C calibration curves for both the Northern and Southern Hemispheres, as well as for the ocean surface layer, have been updated to include a wealth of new data and extended to 55,000 cal BP. Based on tree rings, IntCal20 now extends as a fully atmospheric record to ca. 13,900 cal BP. For the older part of the timescale, IntCal20 comprises statistically integrated evidence from floating tree-ring chronologies, lacustrine and marine sediments, speleothems, and corals. We utilized improved evaluation of the timescales and location variable 14C offsets from the atmosphere (reservoir age, dead carbon fraction) for each dataset. New statistical methods have refined the structure of the calibration curves while maintaining a robust treatment of uncertainties in the 14C ages, the calendar ages and other corrections. The inclusion of modeled marine reservoir ages derived from a three-dimensional ocean circulation model has allowed us to apply more appropriate reservoir corrections to the marine 14C data rather than the previous use of constant regional offsets from the atmosphere. Here we provide an overview of the new and revised datasets and the associated methods used for the construction of the IntCal20 curve and explore potential regional offsets for tree-ring data. We discuss the main differences with respect to the previous calibration curve, IntCal13, and some of the implications for archaeology and geosciences ranging from the recent past to the time of the extinction of the Neanderthals.

In much of Europe, the advent of low-input cereal farming regimes between c.ad 800 and 1200 enabled landowners—lords—to amass wealth by greatly expanding the amount of land under cultivation and exploiting the labour of others. Scientific analysis of plant remains and animal bones from archaeological contexts is generating the first direct evidence for the development of such low-input regimes. This article outlines the methods used by the FeedSax project to resolve key questions regarding the ‘cerealization’ of the medieval countryside and presents preliminary results using the town of Stafford as a worked example. These indicate an increase in the scale of cultivation in the Mid-Saxon period, while the Late Saxon period saw a shift to a low-input cultivation regime and probably an expansion onto heavier soils. Crop rotation appears to have been practised from at least the mid-tenth century.

Terrestrial plant macrofossils from the sedimentary record of Lake Suigetsu, Japan, provide the only quasi-continuous direct atmospheric record of radiocarbon (14C) covering the last 50 ka cal BP (Bronk Ramsey et al. 2012). Since then, new high precision data have become available on U-Th dated speleothems from Hulu Cave China, covering the same time range (Cheng et al. 2018). In addition, an updated varve-based chronology has also been published for the 2006 core from Lake Suigetsu (SG06) based on extended microscopic analysis of the sediments and improved algorithms for interpolation (Schlolaut et al. 2018). Here we reanalyze the radiocarbon dataset from Suigetsu based on the new varve counting information and the constraints imposed by the speleothem data. This enables the new information on the calendar age scale of the Suigetsu dataset to be used in the construction of the consensus IntCal calibration curve. Comparison of the speleothem and plant macrofossil records provides insight into the mechanisms underlying the incorporation of carbon into different types of record and the relative strengths of different types of archive for calibration purposes.

The development of chronologies relies on integrating information from a number of different sources. In addition to direct dating evidence, such as radiocarbon dates, researchers will have contextual information which might be an environmental sequence or the context in an archaeological site. This information can be combined through Bayesian or other types of age-model. Once a chronology has been developed, this information can be used to estimate, for example, chronological uncertainties, rates of change, or the age of material which has not been directly dated.

Dealing with the information associated with chronology building is complicated and re-evaluation of chronologies often requires structured information which is hard to access. Although there are many databases with primary dating information, these often do not contain all of the information needed for a chronology. The Chronological Query Language (CQL) developed for OxCal was intended to be a convenient way of pulling such information together for Bayesian analysis. However, even this does not include much of the associated information required for reusing data in other analyses.

The IntChron initiative builds on the framework set up for the INTIMATE (Integrating Ice core, Marine and Terrestrial Records) chronological database (Bronk Ramsey et al. 2014) and is primarily an information exchange format and data visualization tool which enables users to pull together the types of information needed for chronological analysis. It is intended for use with multiple dating methodologies and while it will be integrated with OxCal, is intended to be an open format suitable for use with other software tools. The file format is JSON which is easily readable in software such as R, Python and MatLab. IntChron is not primarily intended to be a data depository but rather an index of sites where information is stored in the relevant format. As an initial step, databases of radiocarbon dates from the Oxford Radiocarbon Accelerator Unit (including those for the NERC radiocarbon facility), the RESET tephra database, the INTIMATE chronological database and regional radiocarbon databases for Egypt and Southern Africa are all linked. The intention is that users of OxCal will also be able to make published data accessible to others and to store working data, visible only to the user, to be used with the associated analysis tools. The IntChron site allows data from third party sources to be accessed through a representational state transfer (REST) application programming interface (API) in a number of different formats (JSON, csv, txt, oxcal) and associated bibliographic information in BibTeX format.

The aim of the IntChron initiative is to make it easy for users to provide data (in the single JSON format with limited minimum requirements) as well as to access data and tools, while promoting robust chronologies including realistic estimates of uncertainties. It is hoped that this will help to bring the chronological research communities to a point where data access is as easy as it is in some other fields. This is particularly important for Early Career Researchers and for those seeking to use large datasets in novel ways.

Archaeological fieldwork preceding housing development revealed a Mesolithic site in a primary context. A central hearth was evident from a cluster of calcined flint and bone, the latter producing a modelled date for the start of occupation at 8220–7840 cal bc and ending at 7960–7530 cal bc (95% probability). The principal activity was the knapping of bladelets, the blanks for microlith production. Impact-damaged microliths indicated the re-tooling of hunting weaponry, while microwear analysis of other tools demonstrated hide working and butchery activity at the site. The lithics can be classified as a Honey Hill assemblage type on the basis of distinctive leaf-shaped microlithic points with inverse basal retouch.

Such assemblages have a known concentration in central England and are thought to be temporally intermediate between the conventional British Early and Late Mesolithic periods. The lithic assemblage is compared to other Honey Hill type and related Horsham type assemblages from south-eastern England. Both assemblage types are termed Middle Mesolithic and may be seen as part of wider developments in the late Preboreal and Boreal periods of north-west Europe. Rapid climatic warming at this time saw the northward expansion of deciduous woodland into north-west Europe. Emerging new ecosystems presented changes in resource patterns and the Middle Mesolithic lithic typo-technological developments reflect novel foraging strategies as adaptations to the new opportunities of Boreal forest conditions. While Honey Hill-type assemblages are seen as part of such wider processes their distinctive typological signature attests to autochthonous, regional developments of human groups infilling the landscape. Such cultural insularity may reflect changing social boundaries with reduction in mobility range and physical isolation caused by rising sea level and the creation of the British archipelago.

To achieve a reliable radiocarbon (14C) date for an object, any contamination that may be of a different age must be removed prior to dating. Samples that have been conserved with treatments such as adhesives, varnishes or consolidants can pose a particular challenge to 14C dating. At the Oxford Radiocarbon Accelerator Unit (ORAU), common examples of such substances encountered include shellac, the acrylic polymers Paraloid B-67 and B-72, and vinyl acetate-derived polymers (e.g. PVA). Here, a non-carbon-containing absorbent substrate called Chromosorb® was deliberately contaminated with a range of varieties or brands of these conservation treatments, as well as two cellulose nitrate lacquers. A selection of chemical pretreatments was tested for their efficiency at removing them. While the varieties of shellac and Paraloid tested were completely removed with some treatments (water/methanol and acetone/methanol/chloroform sequential washes, respectively), no method was found that was capable of completely removing any of the vinyl acetate-derived materials or the cellulose nitrate lacquers. While Chromosorb is not an exact analog of archaeological wood or bone, for example, this study suggests that it may be possible to remove aged shellac and Paraloid from archaeological specimens with standard organic solvent-acid-base-acid pretreatments, but it may be significantly more difficult to remove vinyl acetate-derived polymers and cellulose nitrate lacquers sufficiently to provide reliable 14C dates. The four categories of conservation treatment studied demonstrate characteristic FTIR spectra, while highlighting subtle chemical and molecular differences between different varieties of shellac, Paraloid and cellulose nitrate lacquers, and significant differences between the vinyl acetate derivatives.

The Last Glacial–Interglacial Transition (LGIT; 15,000–11,000 cal BP) was characterized by complex spatiotemporal patterns of climate change, with numerous studies requiring accurate chronological control to decipher leads from lags in global paleoclimatic, paleoenvironmental, and archaeological records. However, close scrutiny of the few available tree-ring chronologies and radiocarbon-dated sequences composing the IntCal13 14C calibration curve indicates significant weakness in 14C calibration across key periods of the LGIT. Here, we present a decadally resolved atmospheric 14C record derived from New Zealand kauri spanning the Lateglacial from ~13,100–11,365 cal BP. Two floating kauri 14C time series, curve-matched to IntCal13, serve as a 14C backbone through the Younger Dryas. The floating Northern Hemisphere (NH) 14C data sets derived from the YD-B and Central European Lateglacial Master tree-ring series are matched against the new kauri data, forming a robust NH 14C time series to ~14,200 cal BP. Our results show that IntCal13 is questionable from ~12,200–11,900 cal BP and the ~10,400 BP 14C plateau is approximately 5 decades too short. The new kauri record and repositioned NH pine 14C series offer a refinement of the international 14C calibration curves IntCal13 and SHCal13, providing increased confidence in the correlation of global paleorecords.

This article presents the pretreatment protocols for wood samples processed at the Oxford Radiocarbon Accelerator Unit (ORAU), including recent implementation of a purification method to α-cellulose for non-routine samples. We examine the long-term reproducibility of measurement on wood samples at ORAU through the >1000 14C determinations made on known-age tree-ring standards processed in each AMS wheel since our present High Voltage Engineering Europa (HVEE) AMS system came on-line in September 2002. A discussion of background measurements is also provided.

The IntCal09 and Marine09 radiocarbon calibration curves have been revised utilizing newly available and updated data sets from 14C measurements on tree rings, plant macrofossils, speleothems, corals, and foraminifera. The calibration curves were derived from the data using the random walk model (RWM) used to generate IntCal09 and Marine09, which has been revised to account for additional uncertainties and error structures. The new curves were ratified at the 21st International Radiocarbon conference in July 2012 and are available as Supplemental Material at www.radiocarbon.org. The database can be accessed at http://intcal.qub.ac.uk/intcal13/.

Wc describe here the New Zealand kauri (Agathis australis) Younger Dryas (YD) research project, which aims to undertake Δ14C analysis of ∼140 decadal floating wood samples spanning the time interval ∼13.1–11.7 kyr cal BP. We report 14C intercomparison measurements being undertaken by the carbon dating laboratories at University of Waikato (Wk), University of California at Irvine (UCI), and University of Oxford (OxA). The Wk, UCI, and OxA laboratories show very good agreement with an interlaboratory comparison of 12 successive decadal kauri samples (average offsets from consensus values of –7 to +4 14C yr). A University of Waikato/University of Heidelberg (HD) intercomparison involving measurement of the YD-age Swiss larch tree Ollon505, shows a HD/Wk offset of ∼10–20 14C yr (HD younger), and strong evidence that the positioning of the Ollon505 series is incorrect, with a recommendation that the 14C analyses be removed from the IntCal calibration database.

High-quality data from appropriate archives are needed for the continuing improvement of radiocarbon calibration curves. We discuss here the basic assumptions behind 14C dating that necessitate calibration and the relative strengths and weaknesses of archives from which calibration data are obtained. We also highlight the procedures, problems, and uncertainties involved in determining atmospheric and surface ocean 14C/12C in these archives, including a discussion of the various methods used to derive an independent absolute timescale and uncertainty. The types of data required for the current IntCal database and calibration curve model are tabulated with examples.

The varved sediment profile of Lake Suigetsu, central Japan, offers an ideal opportunity from which to derive a terrestrial record of atmospheric radiocarbon across the entire range of the 14C dating method. Previous work by Kitagawa and van der Plicht (1998a,b, 2000) provided such a data set; however, problems with the varve-based age scale of their SG93 sediment core precluded the use of this data set for 14C calibration purposes. Lake Suigetsu was re-cored in summer 2006, with the retrieval of overlapping sediment cores from 4 parallel boreholes enabling complete recovery of the sediment profile for the present “Suigetsu Varves 2006” project (Nakagawa et al. 2012). Over 550 14C determinations have been obtained from terrestrial plant macrofossils picked from the latter SG06 composite sediment core, which, coupled with the core's independent varve chronology, provides the only non-reservoir-corrected 14C calibration data set across the 14C dating range.

Here, physical matching of archive U-channel sediment from SG93 to the continuous SG06 sediment profile is presented. We show the excellent agreement between the respective projects' 14C data sets, allowing the integration of 243 14C determinations from the original SG93 project into a composite Lake Suigetsu 14C calibration data set comprising 808 individual 14C determinations, spanning the last 52,800 cal yr.

Calibration is a fundamental stage of the radiocarbon (14C) dating process if one is to derive meaningful calendar ages from samples' 14C measurements. For the first time, the IntCal09 calibration curve (Reimer et al. 2009) provided an internationally ratified calibration data set across almost the complete range (0 to 50,000 cal BP) of the 14C timescale. However, only the last 12,550 cal yr of this record are composed of terrestrial data, leaving approximately three quarters of the 14C timescale necessarily calibrated via less secure, marine records (incorporating assumptions pertaining to the temporally variable “marine reservoir effect”). The predominantly annually laminated (varved) sediment profile of Lake Suigetsu, central Japan, offers an ideal opportunity to derive an extended terrestrial record of atmospheric 14C across the entire range of the method, through pairing of 14C measurements of terrestrial plant macrofossil samples (extracted from the sediment) with the independent chronology provided through counting of its annual laminations.

This paper presents new data (182 14C determinations) from the upper (largely non-varved) 15 m of the Lake Suigetsu (SG06) sediment strata. These measurements provide evidence of excellent coherence between the Suigetsu 14C data and the IntCal09 calibration curve across the last ~12,000 cal yr (i.e. the portion of IntCal based entirely on terrestrial data). Such agreement demonstrates that terrestrial plant material picked from the Lake Suigetsu sediment provides a reliable archive of atmospheric 14C, and therefore supports the site as being capable of providing a high-resolution extension to the “wholly terrestrial” (i.e. non-reservoir-corrected) calibration curve beyond its present 12,550 cal BP limit.

Calibration is a core element of radiocarbon dating and is undergoing rapid development on a number of different fronts. This is most obvious in the area of 14C archives suitable for calibration purposes, which are now demonstrating much greater coherence over the earlier age range of the technique. Of particular significance to this end is the development of purely terrestrial archives such as those from the Lake Suigetsu sedimentary profile and Kauri tree rings from New Zealand, in addition to the groundwater records from speleothems. Equally important, however, is the development of statistical tools that can be used with, and help develop, such calibration data. In the context of sedimentary deposition, age-depth modeling provides a very useful way to analyze series of measurements from cores, with or without the presence of additional varve information. New methods are under development, making use of model averaging, that generate more robust age models. In addition, all calibration requires a coherent approach to outliers, for both single samples and where entire data sets might be offset relative to the calibration curve. This paper looks at current developments in these areas.