To save content items to your account,
please confirm that you agree to abide by our usage policies.
If this is the first time you use this feature, you will be asked to authorise Cambridge Core to connect with your account.
Find out more about saving content to .
To save content items to your Kindle, first ensure email@example.com
is added to your Approved Personal Document E-mail List under your Personal Document Settings
on the Manage Your Content and Devices page of your Amazon account. Then enter the ‘name’ part
of your Kindle email address below.
Find out more about saving to your Kindle.
Note you can select to save to either the @free.kindle.com or @kindle.com variations.
‘@free.kindle.com’ emails are free but can only be saved to your device when it is connected to wi-fi.
‘@kindle.com’ emails can be delivered even when you are not connected to wi-fi, but note that service fees apply.
This paper presents an original characterization method of trapping phenomena in gallium nitride high electron mobility transistors (GaN HEMTs). This method is based on the frequency dispersion of the output-admittance that is characterized by low-frequency S-parameter measurements. As microwave performances of GaN HEMTs are significantly affected by trapping effects, trap characterization is essential for this power technology. The proposed measurement setup and the trap characterization method allow us to determine the activation energy Ea and the capture cross-section σn of the identified traps. Three original characterizations are presented here to investigate the particular effects of bias, ageing, and light, respectively. These measurements are illustrated through different technologies such as AlGaN/GaN and InAlN/GaN HEMTs with non-intentionally doped or carbon doped GaN buffer layers. The extracted trap signatures are intended to provide an efficient feedback to the technology developments
This paper presents power results of L-band packaged hybrid amplifiers using InAlN/GaN/SiC HEMT power dies. The high-power densities achieved both in pulsed and continuous wave (cw) modes confirm the interest of such technology for high-frequency, high-power, and high-temperature operation. We present here record RF power measurements for different versions of amplifiers. Up to 260 W, i.e. 3.6 W/mm, in pulsed (10 µs/10%) conditions, and 105 W, i.e. 2.9 W/mm, in cw conditions were achieved. Such results are made possible thanks to the impressive performances of InAlN/GaN transistors, even when operating at high temperatures. Unit cell transistors deliver output powers of 4.3 W/mm at Vds = 40 V in the cw mode of operation at the frequency of 2 GHz. The transistor process is described here, as well as the amplifiers design and measurements, with a particular focus to the thermal management aspects.
A study of the electrical performances of AlInN/GaN High Electron Mobility Transistors (HEMTs) on SiC substrates is presented in this paper. Four different wafers with different technological and epitaxial processes were characterized. Thanks to intensive characterizations as pulsed-IV, [S]-parameters, and load-pull measurements from S to Ku bands, it is demonstrated here that AlInN/GaN HEMTs show excellent power performances and constitute a particularly interesting alternative to AlGaN/GaN HEMTs, especially for high-frequency applications beyond the X band. The measured transistors with 250 nm gate lengths from different wafers delivered in continuous wave (cw): 10.8 W/mm with 60% associated power added efficiency (PAE) at 3,5 GHz, 6.6 W/mm with 39% associated PAE at 10.24 GHz, and 4.2 W/mm with 43% associated PAE at 18 GHz.
The reported work focuses on developing antidiffusion barriers capable to increase the thermal stability of metal contacts above 700 C. In the chosen approach, such an antidiffusion barrier consists of several bilayers of materials with different crystalline structures. It has been demonstrated that an interface between such materials effectively blocks the atomic interdiffusion. In this work the following groups of materials were used as the bilayers: ZrB2 and ZrN and TaSiN and TiN. The materials were deposited by means of room temperature sputtering from elemental and compound targets in inert Ar and reactive Ar+N2 atmospheres. The structures were characterised using secondary ion mass spectroscopy depth profiling and scanning electron microscopy cross sectional imaging directly after deposition and after degradation. I-V characteristics were measured and contact resistivities were determined from the circular transmission line method.
The present paper presents an overview of the AlGaN/GaN-based circuits realized over the years. Two technological processes with 0.25 and 0.7 μm gate length allowed one to address applications from L- to Ku-bands. Depending on the process development and frequency of the operation, results on hybrid or MMIC technology are presented. GaN technology is evaluated through the realization of high-power amplifiers, robust low-noise amplifiers, or power switches to prepare the next generation of Tx-Rx modules.
The fabrication of high-resistivity ZnO-based thin films lattice-matched to AlGaN/GaN structures has been developed. It relies on low-temperature reactive sputter deposition of ZnO:Sb from ZnSb target. Taking into account the hygroscopic nature of ZnO surface, an additional coating by Si3N4 films is applied to ensure the humidity protecition. The developped passivation suppresses leakage currents in Schottky diods, and substantially improves output characteristics of AlGaN/GaN HEMT.
A series of isothermal annealing experiments have been performed in the range 790–920°C under N2 flow in order to study the deuterium out-diffusion kinetics of Mg-doped GaN grown on sapphire under deuterated ammonia. The deuterium concentration was measured by SIMS analysis before and after each annealing step. The kinetics closely follow a first-order law. The activation energy related to the deuterium out-diffusion process is 3.1 eV. In addition, deuterium effusion measurements were performed measuring the molecular HD flux while the specimens were annealed in ultra high vacuum with a linear heating rate. In contrast to SIMS, this method detects the species that migrated out of the sample. Effusion peaks of the HD flux at 360 and 490°C are attributed to the fragmentation of adsorbed CHxDy complexes. The molecular HD flux starts increasing at 800°C which is the onset of the GaN decomposition and has its maximum at 920°C. This HD flux is accompanied by the desorption of H and D containing radicals and molecules desorbing above 900°C.
We have studied the influence of a deuterium diffusion on the electrical characteristics of the 2D gas present in AlGaN/GaN heterostructures. The deuterium diffusion is performed by exposing the structures to a rf remote deuterium plasma. We find that both the sheet carrier concentration and the electron mobility decrease and that these effects are partly reversible under thermal annealing. These results suggest that deuterium behave as acceptors in the 2D gas region. The negatively charged deuterium act as additional scattering centers for electrons.
Email your librarian or administrator to recommend adding this to your organisation's collection.