We examined the in vitro developmental competence of parthenogenetic activation (PA) oocytes activated by an electric pulse (EP) and treated with various concentrations of AZD5438 for 4 h. Treatment with 10 µM AZD5438 for 4 h significantly improved the blastocyst formation rate of PA oocytes in comparison with 0, 20, or 50 µM AZD5438 treatment (46.4% vs. 34.5%, 32.3%, and 24.0%, respectively; P < 0.05). The blastocyst formation rate was higher in the group treated with AZD5438 for 4 h than in the groups treated with AZD5438 for 2 or 6 h (42.8% vs. 38.6% and 37.2%, respectively; P > 0.05). Furthermore, 66.67% of blastocysts derived from these AZD5438-treated PA oocytes had a diploid karyotype. The blastocyst formation rate of PA and somatic cell nuclear transfer (SCNT) embryos was similar between oocytes activated by an EP and treated with 2 mM 6-dimethylaminopurine for 4 h and those activated by an EP and treated with 10 µM AZD5438 for 4 h (11.11% vs. 13.40%, P > 0.05). In addition, the level of maturation-promoting factor (MPF) was significantly decreased in oocytes activated by an EP and treated with 10 µM AZD5438 for 4 h. Finally, the mRNA expression levels of apoptosis-related genes (Bax and Bcl-2) and pluripotency-related genes (Oct4, Nanog, and Sox2) were checked by RT-PCR; however, there were no differences between the AZD5438-treated and non-treated control groups. Our results demonstrate that porcine oocyte activation via an EP in combination with AZD5438 treatment can lead to a high blastocyst formation rate in PA and SCNT experiments.

The high-cycle fatigue (HCF) behavior is significantly affected by surface roughness, especially for high strength metal FV520B-I. However, with surface roughness effect, neither the fatigue property, nor the high-cycle fatigue life model about FV520B-I with surface roughness has been reported. In this paper, designed fatigue experiment using the specimen with different surface roughness is presented to study the effectiveness of the roughness to the fatigue. The observations of the fatigue crack initiation sites and the crack propagation. Then the high cycle fatigue behavior of FV520B-I affected by surface roughness is analyzed. The existing very-high-cycle fatigue life model is not well-fit for high-cycle fatigue model of FV520B-I. A NEW high-cycle fatigue life prediction model of FV520B-I, taking surface roughness as a main effective variable is proposed. The model is built up by a comprehensive use of experimental data and the traditional fatigue modeling theory. The new finding between the fatigue strength coefficient and stress amplitude, with surface roughness, is adopted, leading to a NEW modified life prediction model. Study on fatigue model of FV520B-I with surface roughness is a very beneficial effort in fatigue theory and fatigue engineering development.

Microstructural and property evolution of 1050 commercial pure aluminum subjected to high-strain-rate deformation (1.2–2.3 × 103 s−1) by split Hopkinson pressure bar (SHPB) and subsequent annealing treatment were investigated. The as-deformed and their annealed samples at 373–523 K were characterized by transmission electron microscopy (TEM) and microhardness tests. TEM observations reveal that the as-deformed sample is mainly composed of a lamellar structure, whose transverse/longitudinal average subgrain/cell sizes are 293 and 694 nm, respectively. The initial coarse grains are refined significantly. The initial lamellar grain structures are subdivided into pancake-shaped subgrains due to a gradual transition by triple junction motion at 473 K, and then a dramatic microstructural coarsening is observed at 523 K. It is suggested that annealing behavior of this dynamic loading structure is better considered as a continuous process of grain coarsening or continuous recovery.

Multiferroic magnetoelectric nanostructures with coupled magnetization and electric polarization across their interfaces have stimulated intense research activities over the past decade. Such interface-based magnetoelectric coupling can be exploited to significantly improve the performance of many devices such as memories, tunable radio-frequency/microwave devices, and magnetic sensors. In this article, we introduce a number of current or developing technologies and discuss their limitations. We describe how the use of magnetoelectric nanostructures can overcome these limitations to optimize device performance. We also present challenges that need to be addressed in pursuing practical applications of magnetoelectric devices.

We present the results of a mixed-space approach, based on first-principles calculations, to investigate phonon dispersions and thermal properties of Mg2Si and Mg2Sn, including the bulk modulus, Grüneisen parameter, heat capacity, and Debye temperature. It is shown that good agreements are obtained between the calculated results and available experimental data for both phonon dispersions and thermal properties. The phonon dispersions are accurately calculated compared with experimental data due to the high-quality description of LO–TO splitting and transverse acoustic branches along the Γ-K-X symmetry line. We also calculate the heat capacity CP and Debye temperature of Mg2Si1−xSnx alloys (x = 0.375, 0.5, 0.625, 0.875). The CP values at high temperature range from 0.5 to 0.7 J/g/K and ΘD values at room temperature from 332 to 384 K as the Sn content decreases from 0.875 to 0.375.

We investigated the effect of human induced pluripotent stem cell (hiPS) medium on porcine somatic cell nuclear transfer and bovine in vitro fertilized early blastocysts, in comparison with North Carolina State University (NCSU)-37 medium and in vitro culture (IVC)-II medium. After 2 days of culture, the diameter of the portion of the blastocyst that was extruded from the zona pellucid dramatically differed between porcine blastocysts cultured in hiPS medium and those cultured in NCSU-37 medium (221.47 ± 38.94 μm versus 481.87 ± 40.61 μm, P < 0.01). Moreover, the diameter of the portion of the blastocyst significantly differed between bovine blastocysts cultured in hiPS medium and those cultured in IVC-II medium (150.30 ± 29.49 μm versus 195.58 ± 41.59 μm, P < 0.01). Furthermore, the total number of cells per porcine and bovine blastocyst was more than two-fold higher in blastocysts cultured in hiPS medium than in those cultured in NCSU-37 medium (44.33 ± 5.28 and 143.33 ± 16.05, P < 0.01) or IVC-II medium (172.12 ± 45.08 and 604.83 ± 242.64, P < 0.01), respectively. These results indicate that hiPS medium markedly improves the quality of porcine and bovine blastocysts.

Using epitaxy and the misfit strain imposed by an underlying substrate, it is possible to elastically strain oxide thin films to percent levels—far beyond where they would crack in bulk. Under such strains, the properties of oxides can be dramatically altered. In this article, we review the use of elastic strain to enhance ferroics, materials containing domains that can be moved through the application of an electric field (ferroelectric), a magnetic field (ferromagnetic), or stress (ferroelastic). We describe examples of transmuting oxides that are neither ferroelectric nor ferromagnetic in their unstrained state into ferroelectrics, ferromagnets, or materials that are both at the same time (multiferroics). Elastic strain can also be used to enhance the properties of known ferroic oxides or to create new tunable microwave dielectrics with performance that rivals that of existing materials. Results show that for thin films of ferroic oxides, elastic strain is a viable alternative to the traditional method of chemical substitution to lower the energy of a desired ground state relative to that of competing ground states to create materials with superior properties.

We report an efficient phase field formalism to compute the stress distribution in polycrystalline materials with arbitrary elastic inhomogeneity and anisotropy The dependence of elastic stiffness tensor on grain orientation is taken into account, and the elastic equilibrium equation is solved using a spectral iterative perturbation method. We discuss its applications to computing residual stress distribution in systems containing arbitrarily shaped cavities and cracks (with zero elastic modulus) and to determining the effective elastic properties of polycrystals and multilayered composites.

The microstructures of Zr70Cu30 and Zr70Ni30 metallic glasses (MGs) were investigated via the synchrotron radiation techniques combined with the reverse Monte-Carlo simulations. Although Cu and Ni are neighbor elements in the periodic table and their atomic radii are almost the same in length, it is found that atomic- and cluster-scale structural differences occur between these two Zr-based MGs. In particular, the relatively regular clusters caused by the narrow distributions of atomic separations and bond angles are detected in Zr70Cu30. This is the structural origin of the different glass-forming abilities in ZrCu and ZrNi alloys. This work has implications for understanding of the glass-forming mechanism in this class of glassy materials.

Early studies have shown that some mouse cumulus–oocyte complexes (COCs) stored at room temperature for 24 h still retained full developmental potential. In this study, we stored denuded mouse oocytes (DOs) at room temperature (25 °C) for 24 h and activated these oocytes with 10 mM SrCl2 or fertilized the oocytes by IVF. We found that nearly half of the DOs stored at room temperature for 1 day can be fertilized normally by IVF and that two foster mothers gave birth to seven pups. Embryos from stored oocytes were cultured in CZB medium with or without 1 μg/ml 17β-estradiol (E2). The numbers of embryo that developed to morula/blastocyst stage after parthenogenetic activation and IVF were significantly increased when E2 was added to the culture (p < 0.05). These results suggest that E2 might improve mouse embryo development in vitro. The birth of seven agouti pups and their healthy growth indicated that the storage of DOs at room temperature for 1 day may be a practical procedure for mammalian reproduction.

Many biological processes, from cellular metabolism to population dynamics, are characterized by particular allometric scaling relationships between rate and size (power laws). A statistical model for mapping specific quantitative trait loci (QTLs) that are responsible for allometric scaling laws has been developed. We present an improved model for allometric mapping of QTLs based on a more general allometry equation. This improved model includes two steps: (1) use model II regression analysis to estimate the parameters underlying universal allometric scaling laws, and (2) substitute the estimated allometric parameters in the mixture-based mapping model to obtain the estimation of QTL position and effects. This model has been validated by a real example for a mouse F2 progeny, in which two QTLs were detected on different chromosomes that determine the allometric relationship between growth rate and body weight.

Rabbit oocyte can be used as the recipient in interspecies somatic cell nuclear transfer (iSCNT). This work was undertaken in order to study the developmental competence of Capra ibex somatic cells reprogrammed by rabbit oocytes and the fate of mitochondria in iSCNT embryos. Metaphase II (MII) oocytes from superovulated rabbit were used as nuclear recipients. The nuclear donors were Capra ibex somatic cells with different proliferative status: population doubling time (PDL)=15±2 (group 1), 35±2 (group 2), 55±2 (group 3) and 70±2 (group 4). Oocytes reconstructed with electrical pulses (2.1 kV/cm, 10 μs, 2 times) were activated (1.4 kV, 20 μs, 2 times) and then cultured in Medium199 containing 10% fetal bovine serum at 38.5 °C, 5% CO2 in air. In groups 1, 2, 3 and 4, the fusion rates were 35.83%, 66.03%, 65.40% and 35.35%, respectively. Similar cleavage rates were observed among the four groups. However, the developmental potential to morula/blastocyst from early nuclear donor embryos (16.42%/10.45%) was significantly higher (p < 0.05) than in terminal donor embryos (9.52%/3.81%). Polymerase chain reaction analysis of the mitochondrial (mt) DNA cytb gene demonstrated that mtDNAs from ibex and rabbit could be detected at various developmental stages before implantation. In conclusion, our results provide some original information about rescuing Capra ibex using the iSCNT technique. These results indicate that: (1) enucleated rabbit oocytes make Capra ibex fibroblast nuclei reprogramme; (2) the proliferative status of donor cells affects the efficiency of iSCNT; and (3) rabbit ooplasm rescues the donor-derived mtDNAs, resulting in mtDNA heteroplasmy before implantation.

In this study, inter-strain reconstructed embryos were produced by combining the female pronucleus of Kunming mouse (white) with male pronucleus of C57BL/6 strain (black). Metaphase II (MII) oocytes of Kunming mouse were enucleated and the zona pellucida was removed. Then, the enucleated oocytes were inseminated by capacitated sperm of C57BL/6 mouse in vitro. At the same time, MII oocytes of Kunming mouse were artificially activated using strontium chloride solution, which did not contain cytochalasin B. Finally, we removed the male pronucleus derived from C57BL/6 sperm and injected it into a parthenogenetically activated one-pronucleus oocyte by micromanipulation. The reconstructed 2-cell embryos were transplanted into the oviducts of 22 foster mother mice, each receiving about 20 embryos. In the end, seven healthy and live pups were born from one recipient.