The collapse of an initially spherical cavitation bubble near a free surface leads to the formation of two jets: a downward jet into the liquid, and an upward jet penetrating the free surface. In this study, we examine the surprising interaction of a bubble trapped in a stable cavitating vortex ring approaching a free surface. As a result, a single fast and tall liquid jet forms. We find that this jet is observed only above critical Froude numbers ($Fr$) and Weber numbers ($We$) when ${Fr}^2 (1.6-2.73/{We}) > 1$, illustrating the importance of inertia, gravity and surface tension in accelerating this novel jet and thereby reaching heights several hundred times the radius of the vortex ring. Our experimental results are supported by numerical simulations, revealing that the underlying mechanism driving the vortex ring acceleration is the disruption of the equilibrium of high-pressure regions at the front and rear of the vortex ring caused by the free surface. Quantitative analysis based on the energy relationships elucidates that the velocity ratio between the maximum velocity of the free-surface jet and the translational velocity of the vortex ring is relatively stable yet is attenuated by surface tension when the jet is mild.

Differential item functioning (DIF) analysis is an important step in establishing the validity of measurements. Most traditional methods for DIF analysis use an item-by-item strategy via anchor items that are assumed DIF-free. If anchor items are flawed, these methods will yield misleading results due to biased scales. In this article, based on the fact that the item’s relative change of difficulty difference (RCD) does not depend on the mean ability of individual groups, a new DIF detection method (RCD-DIF) is proposed by comparing the observed differences against those with simulated data that are known DIF-free. The RCD-DIF method consists of a D-QQ (quantile quantile) plot that permits the identification of internal references points (similar to anchor items), a RCD-QQ plot that facilitates visual examination of DIF, and a RCD graphical test that synchronizes DIF analysis at the test level with that at the item level via confidence intervals on individual items. The RCD procedure visually reveals the overall pattern of DIF in the test and the size of DIF for each item and is expected to work properly even when the majority of the items possess DIF and the DIF pattern is unbalanced. Results of two simulation studies indicate that the RCD graphical test has Type I error rate comparable to those of existing methods but with greater power.

In educational and psychological measurement when short test forms are used, the asymptotic normality of the maximum likelihood estimator of the person parameter of item response models does not hold. As a result, hypothesis tests or confidence intervals of the person parameter based on the normal distribution are likely to be problematic. Inferences based on the exact distribution, on the other hand, do not suffer from this limitation. However, the computation involved for the exact distribution approach is often prohibitively expensive. In this paper, we propose a general framework for constructing hypothesis tests and confidence intervals for IRT models within the exponential family based on exact distribution. In addition, an efficient branch and bound algorithm for calculating the exact p value is introduced. The type-I error rate and statistical power of the proposed exact test as well as the coverage rate and the lengths of the associated confidence interval are examined through a simulation. We also demonstrate its practical use by analyzing three real data sets.

The estimation of workspace for parallel kinematic machines (PKMs) typically relies on geometric considerations, which is suitable for PKMs operating under light load conditions. However, when subjected to heavy load, PKMs may experience significant deformation in certain postures, potentially compromising their stiffness. Additionally, heavy load conditions can impact motor loading performance, leading to inadequate motor loading in specific postures. Consequently, in addition to geometric constraints, the workspace of PKMs under heavy load is also constrained by mechanism deformation and motor loading performance.

This paper aims at developing a new heavy load 6-PSS PKM for multi-degree of freedom forming process. Additionally, it proposes a new method for estimating the workspace, which takes into account both mechanism deformation and motor loading performance. Initially, the geometric workspace of the machine is predicted based on its geometric configuration. Subsequently, the workspace is predicted while considering the effects of mechanism deformation and motor loading performance separately. Finally, the workspace is synthesized by simultaneously accounting for both mechanism deformation and motor loading performance, and a new index of workspace utilization rate is proposed. The results indicate that the synthesized workspace of the machine diminishes as the load magnitude and load arm increase. Specifically, under a heavy load magnitude of 6000 kN and a load arm of 200 mm, the utilization rate of the synthesized workspace is only 9.9% of the geometric workspace.

In this study, nine isonitrogenous experimental diets containing graded levels of carbohydrates (40 g/kg, 80 g/kg and 120 g/kg) and crude lipids (80 g/kg, 120 g/kg and 160 g/kg) were formulated in a two-factor (3 × 3) orthogonal design. A total of 945 mandarin fish with similar body weights were randomly assigned to twenty-seven tanks, and the experiment diets were fed to triplicate tanks twice daily for 10 weeks. Results showed that different dietary treatments did not significantly affect the survival rate and growth performance of mandarin fish. However, high dietary lipid and carbohydrate levels significantly decreased the protein content of the whole body and muscle of cultured fish. The lipid content of the whole body, liver and muscle all significantly increased with increasing levels of dietary lipid, while only liver lipid level was significantly affected by dietary carbohydrate level. Hepatic glycogen content increased significantly with increasing dietary carbohydrate levels. As to liver antioxidant capacity, malondialdehyde content increased significantly with increasing dietary lipid or carbohydrate content, and catalase activity showed an opposite trend. Superoxide dismutase activity increased significantly with increasing levels of dietary lipid but decreased first and then increased with increasing dietary carbohydrate levels. Additionally, the increase in both dietary lipid and carbohydrate levels resulted in a significant reduction in muscle hardness. Muscle chewiness, gumminess and shear force were only affected by dietary lipid levels and decreased significantly with increasing dietary lipid levels. In conclusion, considering all the results, the appropriate dietary lipids and carbohydrate levels for mandarin fish were 120 g/kg and 80 g/kg, respectively.

We present a theory that quantifies the interplay between intrapore and interpore flow variabilities and their impact on hydrodynamic dispersion. The theory reveals that porous media with varying levels of structural disorder exhibit notable differences in interpore flow variability, characterised by the flux-weighted probability density function (PDF), $\hat {\psi }_\tau (\tau ) \sim \tau ^{-\theta -2}$, for advection times $\tau$ through conduits. These differences result in varying relative strengths of interpore and intrapore flow variabilities, leading to distinct scaling behaviours of the hydrodynamic dispersion coefficient $D_L$, normalised by the molecular diffusion coefficient $D_m$, with respect to the Péclet number $Pe$. Specifically, when $\hat {\psi }_\tau (\tau )$ exhibits a broad distribution of $\tau$ with $\theta$ in the range of $(0, 1)$, the dispersion undergoes a transition from power-law scaling, $D_L/D_m \sim Pe^{2-\theta }$, to linear scaling, $D_L/D_m \sim Pe$, and eventually to logarithmic scaling, $D_L/D_m \sim Pe\ln (Pe)$, as $Pe$ increases. Conversely, when $\tau$ is narrowly distributed or when $\theta$ exceeds 1, dispersion consistently follows a logarithmic scaling, $D_L/D_m \sim Pe\ln (Pe)$. The power-law and linear scaling occur when interpore variability predominates over intrapore variability, while logarithmic scaling arises under the opposite condition. These theoretical predictions are supported by experimental data and network simulations across a broad spectrum of porous media.

This study aimed to demonstrate the utilization value of 1PN embryos. The 1PN zygotes collected from December 2021 to September 2022 were included in this study. The embryo development, the pronuclear characteristics, and the genetic constitutions were investigated. The overall blastocyst formation and good-quality blastocyst rates in 1PN zygotes were 22.94 and 16.24%, significantly lower than those of 2PN zygotes (63.25 and 50.23%, respectively, P = 0.000). The pronuclear characteristics were found to be correlated with the developmental potential. When comparing 1PN zygotes that developed into blastocysts to those that arrested, the former exhibited a significantly larger area (749.49 ± 142.77 vs. 634.00 ± 119.05, P = 0.000), a longer diameter of pronuclear (29.81 ± 3.08 vs. 27.30 ± 3.00, P = 0.000), and a greater number of nucleolar precursor body (NPB) (11.56 ± 3.84 vs. 7.19 ± 2.73, P = 0.000). Among the tested embryos, the diploidy euploidy rate was significantly higher in blastocysts in comparison with the arrested embryos (66.67 vs. 11.76%, P = 0.000), which was also significantly higher in IVF-1PN blastocysts than in ICSI-1PN blastocysts (75.44 vs. 25.00%, P = 0.001). However, the pronuclear characteristics were not found to be linked to the chromosomal ploidy once they formed blastocysts.

In summary, while the developmental potential of 1PN zygotes is reduced, our study shows that, in addition to the reported pronuclear area and diameter, the number of NPB is also associated with their developmental potential. The 1PN blastocysts exhibit a high diploidy euploidy rate, are recommend to be clinically used post genetic testing, especially for patients who do not have other 2PN embryos available.

The liver has multiple functions such as detoxification, metabolism, synthesis and storage. Folate is a water-soluble vitamin B9, which participates in one-carbon transfer reactions, maintains methylation capacity and improves oxidative stress. Folic acid is a synthetic form commonly used as a dietary supplement. The liver is the main organ for storing and metabolising folate/folic acid, and the role of folate/folic acid in liver diseases has been widely studied. Deficiency of folate results in methylation capacity dysfunction and can induce liver disorders. However, adverse effects of excessive use of folic acid on the liver have also been reported. This review aims to explore the mechanism of folate/folic acid in different liver diseases, promote further research on folate/folic acid and contribute to its rational clinical application.

Paranosema locustae is an environmentally friendly parasitic predator with promising applications in locust control. In this study, transcriptome sequencing was conducted on gonadal tissues of Locusta migratoria males and females infected and uninfected with P. locustae at different developmental stages. A total of 18,635 differentially expressed genes (DEGs) were identified in female ovary tissue transcriptomes, with the highest number of DEGs observed at 1 day post-eclosion (7141). In male testis tissue transcriptomes, a total of 32,954 DEGs were identified, with the highest number observed at 9 days post-eclosion (11,245). Venn analysis revealed 25 common DEGs among female groups and 205 common DEGs among male groups. Gene ontology and Kyoto Encyclopaedia of Genes and Genome analyses indicated that DEGs were mainly enriched in basic metabolism such as amino acid metabolism, carbohydrate metabolism, lipid metabolism, and immune response processes. Protein–protein interaction analysis results indicated that L. migratoria regulates the expression of immune- and reproductive-related genes to meet the body's demands in different developmental stages after P. locustae infection. Immune- and reproductive-related genes in L. migratoria gonadal tissue were screened based on database annotation information and relevant literature. Genes such as Tsf, Hex1, Apolp-III, Serpin, Defense, Hsp70, Hsp90, JHBP, JHE, JHEH1, JHAMT, and VgR play important roles in the balance between immune response and reproduction in gonadal tissues. For transcriptome validation, Tsf, Hex1, and ApoLp-III were selected and verified by quantitative real-time polymerase chain reaction (qRT-PCR). Correlation analysis revealed that the qRT-PCR expression patterns were consistent with the RNA-Seq results. These findings contribute to further understanding the interaction mechanisms between locusts and P. locustae.