Vertically neutral collapse of a pulsating bubble occurs when the boundaries above or below the bubble balance the buoyancy effect over a pulsation. In this study, the vertically neutral collapse of a bubble near a vertical rigid wall below the free surface is investigated. The boundary integral method (BIM) is employed to model the bubble dynamics with an open-domain free surface. Moreover, this method is validated against several buoyant bubble experiments. Bubble dynamics in such conditions are associated with three dimensionless parameters: the bubble-free surface distance $\gamma _{{f}}$, bubble–wall distance $\gamma _{{w}}$ and buoyancy parameter $\delta$. We derive the Kelvin impulse of a spherical bubble and the algebraic relationship for vertically neutral collapse, which proves to be accurate for predicting vertically neutral collapse when the bubble is relatively far from the boundaries. Four patterns of the vertically neutral collapse of the bubble for different $\gamma _{{w}}$ and $\gamma _{{f}}$ are identified: (i) formally downward jet; (ii) annular collapse; (iii) horizontal jet; and (iv) weak jet. Despite the downward jet shape, the ‘formally downward jet’ is in the vertically neutral collapse state in terms of the profile of toroidal bubbles and the orientation of local high-pressure zones around the bubble at jet impact. A bulge with a high curvature above the bubble in the ‘annular collapse’ pattern is formed during bubble collapse under two local high-pressure zones at the left and right extremities of the bubble. The ‘horizontal jet’ pattern has the greatest potential to attack the wall, and the power laws of the moment of the jet impact, jet velocity and bubble displacement with respect to the theoretical Kelvin impulse are discussed. In particular, we quantitatively illustrate the role of the free surface on bubble migration towards the wall through the variational power-law exponents of the bubble displacement with respect to $\gamma _{{w}}$.

Path planning is a key research issue in the field of unmanned aerial vehicle (UAV) applications. In practical applications, multi-objective path planning is usually required for multi-UAVs, so this paper proposes the improved balanced artificial bee colony (IB-ABC) algorithm to optimize multi-objective path planning. The algorithm adopts the ABC algorithm that emphasizes the global search capability, which is based on iterative feedback information. It uses single-element points, multi-element points, and iteration constraints to optimize the strategies of employed bees, follower bees, and scout bees, respectively. In terms of time and priority, simulation experiments prove that the IB-ABC algorithm can balance local and global search capabilities, accelerate the speed of convergence, and realize multi-UAV path planning in complex mountain environments.

Copy number variation (CNV) is a very common type of gene variation with high frequency. In recent years, CNV has been paid more attention in various fields, especially in livestock and poultry breeding, which has promoted the progress of breeding. WW domain binding protein 1-like (WBP1L) is a protein coding gene, which plays an important role in cattle populations, and its function has been extensively studied, but it is not clear whether the copy number of the gene can affect the growth and development of cattle populations. In this study, CNV of WBP1L gene was detected in 732 cattle of seven breeds (Qinchuan cattle, QC; Pinan cattle, PN; Yuengling cattle, YL; Xianan cattle, XN; Jiaxian cattle, JX; natural Guyuan cattle, NGY; Jian cattle, JA). In addition, the relationship between CNV and growth phenotype of cattle was studied. The experimental data indicate that the copy number of WBP1L was obviously correlated with heart girth of PN cattle (**P < 0.01), rump length (RL) and body weight (BW) of PN cattle (*P < 0.05), withers height (WH), RL, body length, chest depth and BW of JX cattle (*P < 0.05), WH of NGY cattle (*P < 0.05) and WH of JA cattle (*P < 0.05). It was proved that CNV of WBP1L gene could be used as molecular marker locus for genetic breeding of the above four cattle breeds.

The great demographic pressure brings tremendous volume of beef demand. The key to solve this problem is the growth and development of Chinese cattle. In order to find molecular markers conducive to the growth and development of Chinese cattle, sequencing was used to determine the position of copy number variations (CNVs), bioinformatics analysis was used to predict the function of ZNF146 gene, real-time fluorescent quantitative polymerase chain reaction (qPCR) was used for CNV genotyping and one-way analysis of variance was used for association analysis. The results showed that there exists CNV in Chr 18: 47225201-47229600 (5.0.1 version) of ZNF146 gene through the early sequencing results in the laboratory and predicted ZNF146 gene was expressed in liver, skeletal muscle and breast cells, and was amplified or overexpressed in pancreatic cancer, which promoted the development of tumour through bioinformatics. Therefore, it is predicted that ZNF146 gene affects the proliferation of muscle cells, and then affects the growth and development of cattle. Furthermore, CNV genotyping of ZNF146 gene was three types (deletion type, normal type and duplication type) by Real-time fluorescent quantitative PCR (qPCR). The association analysis results showed that ZNF146-CNV was significantly correlated with rump length of Qinchuan cattle, hucklebone width of Jiaxian red cattle and heart girth of Yunling cattle. From the above results, ZNF146-CNV had a significant effect on growth traits, which provided an important candidate molecular marker for growth and development of Chinese cattle.

The selection of high-quality sperms is critical to intracytoplasmic sperm injection, which accounts for 70–80% of in vitro fertilization (IVF) treatments. So far, sperm screening is usually performed manually by clinicians. However, the performance of manual screening is limited in its objectivity, consistency, and efficiency. To overcome these limitations, we have developed a fast and noninvasive three-stage method to characterize morphology of freely swimming human sperms in bright-field microscopy images using deep learning models. Specifically, we use an object detection model to identify sperm heads, a classification model to select in-focus images, and a segmentation model to extract geometry of sperm heads and vacuoles. The models achieve an F1-score of 0.951 in sperm head detection, a z-position estimation error within ±1.5 μm in in-focus image selection, and a Dice score of 0.948 in sperm head segmentation, respectively. Customized lightweight architectures are used for the models to achieve real-time analysis of 200 frames per second. Comprehensive morphological parameters are calculated from sperm head geometry extracted by image segmentation. Overall, our method provides a reliable and efficient tool to assist clinicians in selecting high-quality sperms for successful IVF. It also demonstrates the effectiveness of deep learning in real-time analysis of live bright-field microscopy images.

In the design of the filter antenna, the filter unit with the same structure as the radiation patch not only improves the selectivity of the band edge, but also helps to improve the in-band impedance. In this design, a compact circular monopole filtering antenna with improved sideband selectivity and in-band impedance using a circular-stub-load resonator is proposed. To obtain better sideband selection characteristics and in-band impedance characteristics, and reduce the mismatch problem caused by the introduction of the filter, a branch-loaded filter with the same resonance mode as the antenna radiation patch is designed. In addition, different shape branch loading structures of the bandpass filter are also studied. The experimental results show that when the loading unit of the filter and the radiation structure of the antenna have the same structure, both good in-band impedance characteristics and sideband selectivity characteristics can be obtained from the filter antenna. The antenna reflection coefficient bandwidth is from 3 to 11 GHz (114%), and the maximum reflection coefficient is only −15 dB, showing good in-band impedance characteristics and sideband selection characteristics. The filter antenna realizes the integration of antenna filtering without increasing the size, and the final size of the antenna is 30 × 25 mm2.

A new system for preparing 14C samples was established for a compact accelerator mass spectrometer (GXNU-AMS) at Guangxi Normal University. This sample preparation system consists of three units: a vacuum maintenance unit, a CO2 purification unit, and a CO2 reduction unit, all of which were made of quartz glass. A series of radiocarbon (14C) preparation experiments were conducted to verify the reliability of the system. The recovery rate of graphite obtained was more than 80%. The carbon content in the commercial toner and wood sample was linearly fitted to the CO2 pressure in the measurement unit of the system. The results showed a good linear relationship, indicating that the reliability of the sample preparation system. AMS measurements were conducted on a batch of standard, wood, and dead graphite samples prepared using this system. The results showed that the beam current of 12C- for each sample was more than 40 μA, the carbon contamination introduced during the sample preparation process was ∼ 2 × 10–15, and that the new sample preparation system is compact, low-contamination, and efficient and meets the GXNU-AMS requirements for 14C samples.

Many waterflooding oil fields, injecting water into an oil-bearing reservoir for pressure maintenance, are in their middle to late stages of development. To explore the geological conditions and improve oilfield recovery of the most important well group of the Hu 136 block, located on the border areas of three provinces (Henan, Shandong, and Hebei), Zhongyuan Oilfield, Sinopec, central China, a 14C cross-well tracer monitoring technology was developed and applied in monitoring the development status and recognize the heterogeneity of oil reservoirs. The tracer response in the production well was tracked, and the water drive speed, swept volume of the injection fluid were obtained. Finally, the reservoir heterogeneity characteristics, such as the dilution coefficient, porosity, permeability, and average pore-throat radius, were fitted according to the mathematical model of the heterogeneous multi-layer inter-well theory. The 14C-AMS technique developed in this work is expected to be a potential analytical method for evaluating underground reservoir characteristics and providing crucial scientific guidance for the mid to late oil field recovery process.

In this study, a compact ultra-wideband (UWB) antenna with quintuple band-notched and wide-band rejection characteristics is studied. The proposed antenna mainly consists of a rectangular radiating patch, a microstrip feeding line, and a modified rectangular ground plane. The quintuple band-notched functions with narrow stop bands are achieved at WiMAX (3.3–3.7 GHz), WLAN (5.15–5.35 GHz and 5.725–5.825 GHz), C-band IEEE INSAT/super-extended (6.7–7.1 GHz) by using three modified inverted U-shaped slots and two symmetrical rectangular slots on the radiating path. Each stop band formed in the UWB antenna can be adjusted independently, and deep reflection zeros are formed between the adjacent stop bands. The formation of reflection zeros improves the band-edge selectivity of the stop band, and the notch characteristics are more prominent. To further study the wide stop band (C-band and X-band) with good selectivity characteristics, a pair of L-shaped open slot is added to the edges of two rectangular slots. Additionally, a pair of modified Rho-shaped resonators is located near the feeding line to realize band-notched characteristic at ITU service bands (8.025–8.4 GHz), thus a quintuple band-notched UWB antenna is achieved. The shape factor (ratio of the −3 dB bandwidth to the −10 dB bandwidth) of the wide stop band is 0.56, which indicates that the antenna has excellent band-edge selectivity. To verify the performance of the proposed design, both the time-domain and the frequency-domain characteristics of the antenna have been studied and analyzed. The simulated and measured results verify the design as a good candidate for various portable UWB applications.

The wheat aphid Sitobion miscanthi (CWA) is an important harmful pest in wheat fields. Insecticide application is the main method to effectively control wheat aphids. However, CWA has developed resistance to some insecticides due to its extensive application, and understanding resistance mechanisms is crucial for the management of CWA. In our study, a new P450 gene, CYP4CJ6, was identified from CWA and showed a positive response to imidacloprid and thiamethoxam. Transcription of CYP4CJ6 was significantly induced by both imidacloprid and thiamethoxam, and overexpression of CYP4CJ6 in the imidacloprid-resistant strain was also observed. The sensitivity of CWA to these two insecticides was increased after the knockdown of CYP4CJ6. These results indicated that CYP4CJ6 could be associated with CWA resistance to imidacloprid and thiamethoxam. Subsequently, the posttranscriptional regulatory mechanism was assessed, and miR-316 was confirmed to participate in the posttranscriptional regulation of CYP4CJ6. These results are crucial for clarifying the roles of P450 in the resistance of CWA to insecticides.

An important goal for humanoid robots is to achieve fast, flexible and stable walking. In previous research, the structure and walking algorithms evolved separately, resulting in a slow evolution speed and lack of an initial design basis. This paper proposes comprehensively considering body morphology and walking patterns, exploring the relationship between them and their influence on the motion ability. The method parameterizes the body morphology and walking patterns. Then a response surface model is established to describe the complex relationship between these parameters and finally obtain the optimized parameters, which provides a reference for the structural design and gait generation.

The present study evaluated whether fat mass assessment using the triceps skinfold (TSF) thickness provides additional prognostic value to the Global Leadership Initiative on Malnutrition (GLIM) framework in patients with lung cancer (LC). We performed an observational cohort study including 2672 LC patients in China. Comprehensive demographic, disease and nutritional characteristics were collected. Malnutrition was retrospectively defined using the GLIM criteria, and optimal stratification was used to determine the best thresholds for the TSF. The associations of malnutrition and TSF categories with survival were estimated independently and jointly by calculating multivariable-adjusted hazard ratios (HR). Malnutrition was identified in 808 (30·2 %) patients, and the best TSF thresholds were 9·5 mm in men and 12 mm in women. Accordingly, 496 (18·6 %) patients were identified as having a low TSF. Patients with concurrent malnutrition and a low TSF had a 54 % (HR = 1·54, 95 % CI = 1·25, 1·88) greater death hazard compared with well-nourished individuals, which was also greater compared with malnourished patients with a normal TSF (HR = 1·23, 95 % CI = 1·06, 1·43) or malnourished patients without TSF assessment (HR = 1·31, 95 % CI = 1·14, 1·50). These associations were concentrated among those patients with adequate muscle mass (as indicated by the calf circumference). Additional fat mass assessment using the TSF enhances the prognostic value of the GLIM criteria. Using the population-derived thresholds for the TSF may provide significant prognostic value when used in combination with the GLIM criteria to guide strategies to optimise the long-term outcomes in patients with LC.

Power scaling based on traditional ytterbium-doped fibers (YDFs) is limited by optical nonlinear effects and transverse mode instability (TMI) in high-power fiber lasers. Here, we propose a novel long tapered fiber with a constant cladding and tapered core (CCTC) along its axis direction. The tapered-core region of the fiber is designed to enhance the stimulated Raman scattering (SRS) threshold and suppress higher-order mode resonance in the laser cavity. The CCTC YDF was fabricated successfully with a modified chemical vapor deposition (MCVD) method combined with solution doping technology, which has a cladding diameter of 400 μm and a varying core with a diameter of ~24 μm at both ends and ~31 μm in the middle. To test the performance of the CCTC fiber during high-power operation, an all-fiber laser oscillator based on a CCTC YDF was investigated experimentally. As a result, a maximum output power of 3.42 kW was achieved with an optical-to-optical efficiency of 55.2%, although the TMI effect was observed at an output power of ~3.12 kW. The measured beam quality (M2 factor) was ~1.7, and no sign of the Raman component was observed in the spectrum. We believe that CCTC YDF has great potential to simultaneously mitigate the SRS and TMI effects, and further power scaling is promising by optimizing the structure of the YDF.

A deep ice core was drilled at Dome A, Antarctic Plateau, East Antarctica, which started with the installation of a casing in January 2012 and reached 800.8 m in January 2017. To date, a total of 337 successful ice-core drilling runs have been conducted, including 118 runs to drill the pilot hole. The total drilling time was 52 days, of which eight days were required for drilling down and reaming the pilot hole, and 44 days for deep ice coring. The average penetration depths of individual runs were 1 and 3.1 m for the pilot hole drilling and deep ice coring, respectively. The quality of the ice cores was imperfect in the brittle zone (650−800 m). Some of the troubles encountered are discussed for reference, such as armoured cable knotting, screws falling into the hole bottom, and damaged parts, among others.

Subglacial lake exploration is of great interest to the science community. RECoverable Autonomous Sonde (RECAS) provides an exploration tool to measure and sample subglacial lake environments while the subglacial lake remains isolated from the glacier surface and atmosphere. This paper presents an electronic control system design of 200 m prototype of RECAS. The proposed electronic control system consists of a surface system, a downhole control system, and a power transfer and communication system. The downhole control system is the core element of RECAS, and is responsible for sonde status monitoring, sonde motion control, subglacial water sampling and in situ analysis. A custom RS485 temperature sensor was developed to cater for the limited size and depth requirements of the system. We adopted a humidity-based measurement to monitor for a housing leak. This condition is because standard leak detection monitoring of water conductivity may be inapplicable to pure ice in Antarctica. A water sampler control board was designed to control the samplers and monitor the on/off state. A high-definition camera system with built-in storage and self-heating ability was designed to perform the video recording in the subglacial lake. The proposed electronic control system is proven effective after a series of tests.

In December 2019, the first confirmed case of pneumonia caused by a novel coronavirus was reported. Coronavirus disease 2019 (COVID-19) is currently spreading around the world. The relationships among the pandemic and its associated travel restrictions, social distancing measures, contact tracing, mask-wearing habits and medical consultation efficiency have not yet been extensively assessed. Based on the epidemic data reported by the Health Commission of Wenzhou, we analysed the developmental characteristics of the epidemic and modified the Susceptible-Exposed-Infectious-Removed (SEIR) model in three discrete ways. (1) According to the implemented preventive measures, the epidemic was divided into three stages: initial, outbreak and controlled. (2) We added many factors, such as health protections, travel restrictions and social distancing, close-contact tracing and the time from symptom onset to hospitalisation (TSOH), to the model. (3) Exposed and infected people were subdivided into isolated and free-moving populations. For the parameter estimation of the model, the average TSOH and daily cured cases, deaths and imported cases can be obtained through individual data from epidemiological investigations. The changes in daily contacts are simulated using the intracity travel intensity (ICTI) from the Baidu Migration Big Data platform. The optimal values of the remaining parameters are calculated by the grid search method. With this model, we calculated the sensitivity of the control measures with regard to the prevention of the spread of the epidemic by simulating the number of infected people in various hypothetical situations. Simultaneously, through a simulation of a second epidemic, the challenges from the rebound of the epidemic were analysed, and prevention and control recommendations were made. The results show that the modified SEIR model can effectively simulate the spread of COVID-19 in Wenzhou. The policy of the lockdown of Wuhan, the launch of the first-level Public Health Emergency Preparedness measures on 23 January 2020 and the implementation of resident travel control measures on 31 January 2020 were crucial to COVID-19 control.

Since the outbreak of 2019 novel coronavirus (2019-nCoV) infection in Wuhan City, China, pediatric cases have gradually increased. It is very important to prevent cross-infection in pediatric fever clinics, to identify children with fever in pediatric fever clinics, and to strengthen the management of pediatric fever clinics. According to prevention and control programs, we propose the guidance on the management of pediatric fever clinics during the nCoV pneumonia epidemic period, which outlines in detail how to optimize processes, prevent cross-infection, provide health protection, and prevent disinfection of medical staff. The present consideration statement summarizes current strategies on the pre-diagnosis, triage, diagnosis, treatment, and prevention of 2019-nCoV infection, which provides practical suggestions on strengthening the management of pediatric fever clinics during the nCoV pneumonia epidemic period.

Previous work led to the proposal that the precision feeding of a high-concentrate diet may represent a potential method with which to enhance feed efficiency (FE) when rearing dairy heifers. However, the physiological and metabolic mechanisms underlying this approach remain unclear. This study used metabolomics analysis to investigate the changes in plasma metabolites of heifers precision-fed diets containing a wide range of forage to concentrate ratios. Twenty-four half-sib Holstein heifers, with a similar body condition, were randomly assigned into four groups and precision fed with diets containing different proportions of concentrate (20%, 40%, 60% and 80% based on DM). After 28 days of feeding, blood samples were collected 6 h after morning feeding and gas chromatography time-of-flight/MS was used to analyze the plasma samples. Parameters of oxidative status were also determined in the plasma. The FE (after being corrected for gut fill) increased linearly (P < 0.01) with increasing level of dietary concentrate. Significant changes were identified for 38 different metabolites in the plasma of heifers fed different dietary forage to concentrate ratios. The main pathways showing alterations were clustered into those relating to carbohydrate and amino acid metabolism; all of which have been previously associated with FE changes in ruminants. Heifers fed with a high-concentrate diet had higher (P < 0.01) plasma total antioxidant capacity and superoxide dismutase but lower (P ≤ 0.02) hydroxyl radical and hydrogen peroxide than heifers fed with a low-concentrate diet, which might indicate a lower plasma oxidative status in the heifers fed a high-concentrate diet. Thus, heifers fed with a high-concentrate diet had higher FE and antioxidant capacity but a lower plasma oxidative status as well as changed carbohydrate and amino acid metabolism. Our findings provide a better understanding of how forage to concentrate ratios affect FE and metabolism in the precision-fed growing heifers.