Rift propagation, rather than basal melt, drives the destabilization and disintegration of the Thwaites Eastern Ice Shelf. Since 2016, rifts have episodically advanced throughout the central ice-shelf area, with rapid propagation events occurring during austral spring. The ice shelf's speed has increased by ~70% during this period, transitioning from a rate of 1.65 m d−1 in 2019 to 2.85 m d−1 by early 2023 in the central area. The increase in longitudinal strain rates near the grounding zone has led to full-thickness rifts and melange-filled gaps since 2020. A recent sea-ice break out has accelerated retreat at the western calving front, effectively separating the ice shelf from what remained of its northwestern pinning point. Meanwhile, a distributed set of phase-sensitive radar measurements indicates that the basal melting rate is generally small, likely due to a widespread robust ocean stratification beneath the ice–ocean interface that suppresses basal melt despite the presence of substantial oceanic heat at depth. These observations in combination with damage modeling show that, while ocean forcing is responsible for triggering the current West Antarctic ice retreat, the Thwaites Eastern Ice Shelf is experiencing dynamic feedbacks over decadal timescales that are driving ice-shelf disintegration, now independent of basal melt.

Ocean-driven melt of Antarctic ice shelves is an important control on mass loss from the ice sheet, but is complex to study due to significant variability in melt rates both spatially and temporally. Here we assess the strengths and weakness of satellite and field-based observations as tools for testing models of ice-shelf melt. We discuss how the complementary use of field, satellite and model data can be a powerful but underutilised tool for studying melt processes. Finally, we identify some community initiatives working to collate and publish coordinated melt rate datasets, which can be used in future for validating satellite-derived maps of melt and evaluating processes in numerical simulations.

During the 2018/19 Antarctic field season, the British Antarctic Survey (BAS) Basal conditions on Rutford Ice Stream: BEd Access, Monitoring and Ice Sheet History’ (BEAMISH) project drilled three holes through the Rutford Ice Stream, West Antarctica. At up to 2154 m, these are the deepest hot water drilled subglacial access holes yet created, enabling the recovery of sediment from the subglacial environment, and instrumenting the ice stream and its bed. The BEAMISH hot-water drill system was built on extensive experience with the BAS ice shelf hot-water drill and utilises many identical components. With up to 1 MW of heating power available, the hot water drill produces 140 L min−1 of water at 85°C to create a 300 mm diameter access hole to the base of the ice stream. New systems and processes were developed for BEAMISH to aid critical aspects of deep access drilling, most notably the creation of cavities interlinking boreholes at 230 m below the surface and enabling water recirculation throughout the deep drilling operations. The modular design of the BEAMISH drill offers many benefits in its adaptability, redundancy, and minimal logistical footprint. These design features can easily accommodate the modifications needed for future deep, clean access hole creation in the exploration of subglacial environments.

George L. Cowgill had a major influence on the study of the ancient city of Teotihuacan and the development and promotion of quantitative methods in archaeology. His wit, teaching, and research influenced many in the profession. We draw on two published autobiographical works (Cowgill 2008a, 2013a), some unpublished autobiographical notes (Cowgill 1983), his many publications, and our own associations with George.

Several autonomous phase-sensitive radio-echo sounders (ApRES) were deployed at Greenland glaciers to investigate ice deformation. Different attenuation settings were tested and it was observed that, in the presence of clipping of the deramped ApRES signal, each setting produced a different result. Specifically, higher levels of clipping associated with lower attenuation produced an apparent linear increase of diurnal vertical cumulative displacement with depth, and obscured the visibility of the basal reflector in the return amplitude. An example with a synthetic deramped signal confirmed that these types of artifacts result from the introduction of harmonics from square-wave-like features introduced by clipping. Apparent linear increase of vertical displacement with depth occurs when the vertical position of a near-surface internal reflector changes in time. Artifacts in the return amplitude may obscure returns from internal reflectors and the basal reflector, making it difficult to detect thickness evolution of the ice and to correctly estimate vertical velocities. Variations in surface melt during ApRES deployments can substantially modulate the received signal strength on short timescales, and we therefore recommend using higher attenuator settings for deployments in such locations.

Increasing ocean and air temperatures have contributed to the removal of floating ice shelves from several Greenland outlet glaciers; however, the specific contribution of these external forcings remains poorly understood. Here we use atmospheric, oceanographic and glaciological time series data from the ice shelf of Petermann Gletscher, NW Greenland to quantify the forcing of the ocean and atmosphere on the ice shelf at a site ~16 km from the grounding line within a large sub-ice-shelf channel. Basal melt rates here indicate a strong seasonality, rising from a winter mean of 2 m a−1 to a maximum of 80 m a−1 during the summer melt season. This increase in basal melt rates confirms the direct link between summer atmospheric warming around Greenland and enhanced ocean-forced melting of its remaining ice shelves. We attribute this enhanced melting to increased discharge of subglacial runoff into the ocean at the grounding line, which strengthens under-ice currents and drives a greater ocean heat flux toward the ice base.

The detection and monitoring of meltwater within firn presents a significant monitoring challenge. We explore the potential of small wireless sensors (ETracer+, ET+) to measure temperature, pressure, electrical conductivity and thus the presence or absence of meltwater within firn, through tests in the dry snow zone at the East Greenland Ice Core Project site. The tested sensor platforms are small, robust and low cost, and communicate data via a VHF radio link to surface receivers. The sensors were deployed in low-temperature firn at the centre and shear margins of an ice stream for 4 weeks, and a ‘bucket experiment’ was used to test the detection of water within otherwise dry firn. The tests showed the ET+ could log subsurface temperatures and transmit the recorded data through up to 150 m dry firn. Two VHF receivers were tested: an autonomous phase-sensitive radio-echo sounder (ApRES) and a WinRadio. The ApRES can combine high-resolution imaging of the firn layers (by radio-echo sounding) with in situ measurements from the sensors, to build up a high spatial and temporal resolution picture of the subsurface. These results indicate that wireless sensors have great potential for long-term monitoring of firn processes.

The phase-sensitive radio-echo sounder (pRES) is a powerful new instrument that can measure the depth of internal layers and the glacier bed to millimetre accuracy. We use a stationary 16-antenna pRES array on Store Glacier in West Greenland to measure the three-dimensional orientation of dipping internal reflectors, extending the capabilities of pRES beyond conventional depth sounding. This novel technique portrays the effectiveness of pRES in deriving the orientation of dipping internal layers that may complement profiles obtained through other geophysical surveying methods. Deriving ice vertical strain rates from changes in layer depth as measured by a sequence of pRES observations assumes that the internal reflections come from vertically beneath the antenna. By revealing the orientation of internal reflectors and the potential deviation from nadir of their associated reflections, the use of an antenna array can correct this assumption. While the array configuration was able to resolve the geometry of englacial layers, the same configuration could not be used to accurately image the glacier bed. Here, we use simulations of the performance of different array geometries to identify configurations that can be tailored to study different types of basal geometry for future deployments.

Precise measurements of basal melting have been made at a series of 14 sites lying within a few kilometres of the grounding line of the Ronne Ice Shelf, Antarctica, where the ice thickness ranges from 1570 to 1940 m. The study was conducted over the course of 1 year and included a detailed survey of the horizontal deformation, as well as phase-sensitive radar measurements of the vertical displacement of both internal reflecting horizons and the ice-shelf base. Results from the surface survey show that the long-term viscous strain rate is modulated at tidal frequencies by (probably) elastic strains of order 10−5 per metre of tidal elevation. The radar measurements show a similar modulation of the long-term thinning/thickening of the ice shelf, with thickness oscillations up to a few centimetres in range. The long-term trends in ice thickness determined at points moving with the ice-shelf flow are consistent with a steady-state thickness profile. Vertical strain rates within the ice shelf were determined from the relative motion of internal reflectors. At two sites the observations were sufficient to discern the effect of tidal bending about a neutral surface 60% of the way down the ice column. Coincident measurements of horizontal and vertical strain imply a Poisson’s ratio of 0.5, and this combined with the asymmetric bending gives rise to the observed oscillations in thickness. At a number of sites the longterm viscous strain rates were found to be a linear function of depth. For an ice shelf this is an unexpected result. It can be attributed to the presence of significant vertical shear stresses set up close to the grounding line where the ice is still adjusting to flotation. Additional vertical motion arising from firn compaction was observed within the upper layers of the ice shelf. The additional motion was consistent with the assumption that firn density is a function only of the time since burial by steady surface accumulation. With both spatial and temporal fluctuations in the vertical strain rate accurately quantified it was possible to estimate the vertical motion of the ice-shelf base in response. Differences between the calculated and observed motion of the basal reflector arise because of basal melting. Derived melt rates at the 14 sites ranged from −0.11 ±0.31 to 2.51 ±0.10 m a−1, with a mean of 0. 85 m a−1 and a standard deviation of 0.69 m a−1, and showed no signs of significant sub-annual temporal variability. There was no obvious global correlation with either ice thickness or distance from the grounding line, although melt rates tended to decrease downstream along each of the flowlines studied. Previous estimates of basal melting in this region have been obtained indirectly from an assumption that the ice shelf is locally in equilibrium and have included a broad range of values. Only those at the lower end of the published range are consistent with the directly measured melt rates reported here.

The ApRES (autonomous phase-sensitive radio-echo sounder) instrument is a robust, lightweight and relatively inexpensive radar that has been designed to allow long-term, unattended monitoring of ice-shelf and ice-sheet thinning. We describe the instrument and demonstrate its capabilities and limitations by presenting results from three trial campaigns conducted in different Antarctic settings. Two campaigns were ice sheet-based – Pine Island Glacier and Dome C – and one was conducted on the Ross Ice Shelf. The ice-shelf site demonstrates the ability of the instrument to collect a time series of basal melt rates; the two grounded ice applications show the potential to recover profiles of vertical strain rate and also demonstrate some of the limitations of the present system.