Residual stress is generally evaluated using indentation by comparing the indentation curves of stressed and stress-free states. Here, we suggest a new method that can evaluate surface residual stress without indentation testing on stress-free specimen using stress-independent indentation parameters and an analysis of indentation contact morphology for the stress-free state. We found that several indentation parameters are independent of the stress by Vickers indentation testing on various stress states. The indentation contact morphology can be represented by indentation parameters including stress-independent ones, and by applying the stress-independent parameters obtained from the stressed state to the indentation contact depth function, we can estimate an indentation curve for stress-free state. The estimated curve matches well with the experimental stress-free indentation curve, and it was also confirmed that the applied stress values evaluated by comparing the estimated curve with the stressed indentation curve agree well with the reference values obtained from strain gauge.

Distribution of wax in laser printer toner was observed using an ultra-high-voltage (UHV) and a medium-voltage transmission electron microscope (TEM). As the radius of the wax spans a hundred to greater than a thousand nanometers, its three-dimensional recognition via TEM requires large depth of focus (DOF) for a volumetric specimen. A tomogram with a series of the captured images would allow the determination of their spatial distribution. In this study, bright-field (BF) images acquired with UHV-TEM at a high tilt angle prevented the construction of the tomogram. Conversely, the Z-contrast images acquired by the medium-voltage TEM produced a successful tomogram. The spatial resolution for both is discussed, illustrating that the image degradation was primarily caused by beam divergence of the Z-contrast image and the combination of DOF and chromatic aberration of the BF image from the UHV-TEM.

Anthropogenic land use within watersheds has substantial effects on aquatic habitats and biological communities. From September 2006 to December 2008, we investigated the effects of land use on benthic macroinvertebrate communities by comparing Song Stream and Odae Stream, two adjacent mountain streams in Korea whose watersheds have different land use patterns. Song Stream is significantly disturbed by agricultural activities in the watershed, whereas Odae Stream is relatively undisturbed and is surrounded by a well-conserved forest area. Song Stream had significantly higher levels of all nutrients and sediment-related factors due to the adjacent agricultural area. As a result, Song Stream had markedly lower species community indices, such as taxa richness and abundance. In Song Stream, macroinvertebrate scrapers and predators were most adversely affected, whereas collector-gatherers became a dominant group. Based on correlation and multivariate analyses, total dissolved solids had the strongest negative relationship with macroinvertebrate assemblages, followed by electrical conductivity, total nitrogen, and pH. The proportion of cobble in stream substrate was positively related to the richness and abundance of macroinvertebrates. Our results indicate that disturbances caused by agricultural land use, particularly sand deposition, had significant adverse effects on macroinvertebrate habitats and on the biotic integrity of benthic macroinvertebrate communities.

We demonstrate series-connected tandem photovoltaic cells consisting of hydrogenated amorphous silicon (a-Si:H) solar cells and polymer-based organic photovoltaic (OPV) cells. One of the limiting factors of a-Si:H solar cells is their narrow absorption spectrum as compared with that of crystalline silicon solar cells. In order to overcome this limitation, we fabricated a hybrid tandem solar cell by employing a solution-processed OPV subcell based on a low bandgap semiconducting polymer onto the a-Si:H subcell. It was found that the interfacial property of the hole transporting intermediate layer between the subcells strongly affects the photovoltaic property of the tandem cells. By using MoO3 as an efficient hole transporting intermediate layer instead of the conventional conducting polymer, we obtained the power conversion efficiency of 1.84% and the open-circuit voltage (VOC) of 1.50 V which corresponds closely to the sum of the VOCs of the subcells.

Oxidative modification of LDL is causally involved in the development of atherosclerosis and occurs in vivo in the blood as well as within the vascular wall. The present study attempted to explore whether polyphenolic flavonoids influence monocyte-endothelium interaction and lectin-like oxidised LDL receptor 1 (LOX-1) expression involved in the early development of atherosclerosis. The flavones luteolin and apigenin inhibited THP-1 cell adhesion onto oxidised LDL-activated human umbilical vein endothelial cells (HUVEC), while the flavanols of ( − )epigallocatechin gallate and (+)catechin, the flavonols of quercetin and rutin, and the flavanones of naringin, naringenin, hesperidin and hesperetin did not have such effects. Consistently, Western blot analysis revealed that the flavones at 25 μm dramatically and significantly abolished HUVEC expression of vascular cell adhesion molecule-1 and E-selectin evidently enhanced by oxidised LDL; these inhibitory effects were exerted by drastically down regulating mRNA levels of these cell adhesion molecules. In addition, quercetin and luteolin significantly attenuated expression of LOX-1 protein up regulated in oxidised LDL-activated HUVEC with a fall in transcriptional mRNA levels of LOX-1. In addition, quercetin and luteolin clearly blunted oxidised LDL uptake by HUVEC treated with oxidised LDL. The results demonstrate that the flavones luteolin and apigenin as well as quercetin were effective in the different initial steps of atherosclerosis process by inhibiting oxidised LDL-induced endothelial monocyte adhesion and/or oxidised LDL uptake. Therefore, certain flavonoids qualify as anti-atherogenic agents in LDL systems, which may have implications for strategies attenuating endothelial dysfunction-related atherosclerosis.

In this study, we assess the neuropsychological profiles of both early and late symptom-onset obsessive-compulsive disorder (OCD) patients. The early and late-onset OCD patients are compared to the control group with a series of neuropsychological measurements. The late-onset OCD patients exhibited impaired performance on the immediate and the delayed recall conditions of the Rey-Osterrieth Complex Figure Test (RCFT) and the letter and category fluency of the Controlled Oral Word Association Test (COWA), compared to the normal controls and the early-onset OCD patients. The controls and early-onset OCD patients did not differ on any of the neuropsychological measurements taken in this study. These results suggest that different neurophysiological mechanisms are in play in early and late-onset OCD patients, and age of onset can serve as a potential marker for the subtyping of OCD. (JINS, 2007, 13, 30–37.)

Since in instrumented indentation the contact area is indirectly measured from the contact depth, the natural and unavoidable roughness of real surfaces can induce some errors in determining the contact area and thus in calculating hardness and Young's modulus. To alleviate these possible errors and evaluate mechanical properties more precisely, here a simple contact model that takes into account the surface roughness is proposed. A series of instrumented indentations were made on W and Ni samples whose surface roughness is intentionally controlled, and the results are discussed in terms of the proposed model.

The effects of reactive ion etching damage on the electrical properties of Pt/SBT/Pt capacitors have been investigated. The plasma treated SBT/Pt layers showed a significant decrease in remanent polarization compared with that of the reference sample. The remanent polarization of the plasma treated layers varied with the gas ratios of the Cl2/Ar plasma. XPS analysis of the plasma treated SBT/Pt samples showed that the surface composition was significantly changed as the gas ratios were varied, which resulted in a polarization decrease in the plasma treated samples. Plasma treatment also caused a voltage shift of the hysteresis loops along the voltage axis. The magnitude of the voltage shift was increased for the chlorine-rich plasma. The results of surface analysis revealed that the voltage shift is caused by oxygen deficiency at the SBT surface. Based on our experimental results, reactive ion etching damage was explained in terms of physical and electrical effects of the plasma on the electrical properties of the ferroelectric Pt/SBT/Pt capacitors.