Stable carbon isotope ratios were measured on the alpha-cellulose in tree rings of a pine tree (Pinus densiflora) from Yeongwol, Korea. We developed an annual-resolution δ13C series (1835–1905) by correcting the measured data for changes in δ13C of air to minimize non-climatic influences. To investigate the climatic signal in the δ13C series, we performed correlation analysis between δ13C and the Cheugugi climate data. The Cheugugi precipitation data were first recorded by King Sejong (1397–1450) of the Joseon Dynasty. However, the longest set of precipitation data available is the one collected in Seoul (1776–1907). Although many studies support the reliability of the Cheugugi data, no previous studies have investigated the potential of the δ13C signal in tree rings as paleoclimate proxy using the Cheugugi data. Recent precipitation trends in Yeongwol are quite similar to that of Seoul, and we found significant correlations between the Cheugugi data and the δ13C series. We suggest further studies to replicate these results and confirm whether comparing δ13C variations in tree rings and Cheugugi data is a useful method of investigating the potential of the δ13C signal as a paleoclimate proxy in or near the Korean peninsula.

In this study, we design a differential CMOS power amplifier using a 180-nm SOI RFCMOS process for 802.11n (64-QAM, 20 MHz bandwidth, 9.6 dB peak to average power ratio (PAPR)) applications. To minimize the chip area and mismatch in differential signals, we propose a layout method with an inter-stage matching network using a split inductor. By virtue of the symmetrical layout of the proposed split inductor, the mismatch in the differential signals is minimized, while the interconnection lines between the driver and power stages are shortened to minimize the overall chip area and the loss induced by the resistive parasitic components. The designed power amplifier is measured using a wireless local area network (WLAN) 802.11n signal to verify the feasibility of the proposed layout technique. The power amplifier achieved 20.34 dBm output power, while the measured EVM for the 802.11n applications is satisfied. From the measured results, we successfully prove the feasibility of the proposed power amplifier.

The effects of polymer substrates on the interfacial structure and the thermal stability of Ga-doped ZnO (GZO) thin films were investigated. The GZO thin films were deposited on polyethylene terephthalate (PET) and polyethylene naphthalate (PEN) substrates by rf-magnetron sputtering at room temperature, and thermal stability tests of the GZO thin films on the polymer substrates were performed at 150°C up to 8 h in air. Electrical and structural characterizations of the GZO thin films on the PET and the PEN substrates were carried out, and the origins of the stable interfacial structure and the improved thermal stability of the GZO thin film on the PEN substrate were discussed.

At the Seoul National University accelerator mass spectrometry (AMS) laboratory, we are planning to develop an automated sample preparation system for higher throughput of radiocarbon dating. This system will consist of several sections, including a combustion line, CO2 trap, graphitization system, and so on. We usually collect CO2 by cryogenic trapping. However, since handling liquid nitrogen is expected to be rather difficult, we are interested in replacing the cryogenic method with the molecular sieve method for the collection of CO2. In this study, we compare the performance of the cryogenic trapping method and molecular sieve method. Zeolite 13X is used as a molecular sieve, and as test samples we use the oxalic acid standard (NIST SRM 4990C), high-purity graphite powder, and archaeological charcoals. The pMC values and the radiocarbon ages (BP) obtained from samples prepared by the above 2 methods are very similar. We especially focused on the memory effect of the molecular sieve, meaning the CO2 contamination from a previous sample, which can cause errors in age determination. To reduce this effect, we flowed He gas through a zeolite container for several minutes at a high temperature before the CO2 was introduced. By the adding this step, we have obtained more reliable results.

We investigated the pressure dependence of the inductive coupled plasma (ICP) oxidation on the electrical characteristics of the thin oxide films. Activation energies and electron temperatures with different pressures were estimated. To demonstrate the pressure effect on the plasma oxide quality, simple N type metal-oxide-semiconductor (NMOS) transistors were fabricated and investigated in a few electrical properties. At higher pressure than 200mTorr, plasma oxide has a slightly higher on-current and a lower interfacial trap density. The on-current gain seems to be related to the field mobility increase and the lower defective interface to the electron temperature during oxidation.

A monodisperse spherical Y2O3:Eu3+ phosphor was prepared by a homogeneous precipitation method. The mean size of the phosphor particles (MSPP) was successfully controlled by changing the volume ratio of normal alcohol (RA) (propanol) in the solvents mixed between deionized water and normal propanol. When the RA was increased from 0 to 0.7, the MSPP decreased while maintaining a high yield of >95%. Although the prepared phosphor samples were fired at the same temperature, the thermal energy was delivered more efficiently into the inner side of the phosphor particles with the decrease of the MSPP. Therefore, the crystallinity and also the photoluminescence (PL) intensity of the phosphor increased with the decrease in the MSPP. In addition, because the numbers of Eu3+ ions located near the particle surfaces increased with the decrease of particle size, the ratio of PL intensity caused by the 5D0–7F2 transition to that caused by 5D0–7F1 transition increased from 10.8 to 12.7 with the decrease in MSPP.

The Far-ultraviolet IMaging Spectrograph (FIMS) is a small spectrograph optimized for the observations of diffuse hot interstellar medium in far-ultraviolet wavebands (900–1150Å and 1335–1750Å). The instrument is expected to be sensitive to emission line fluxes an order of magnitude fainter than any previous missions. FIMS is currently under development and is scheduled for launch in 2002.

A new annealing method, a combination of rapid thermal annealing (RTA) and furnace annealing, has been developed to obtain a high quality poly-Si from a-Si deposited by LPCVD. This method produces a large grain poly-Si with good uniformity, which may result from the growth of relatively defect-free nucleus generated at a high temperature by RTA. Poly-Si thin film transistors fabricated by this new annealing method have higher field effect mobility and better uniformity compared with those by the conventional furnace annealing.