China has constructed a rigorous state apparatus to control its online social content. To date, research has largely focused on the central government's cyber control, but the less studied local cyberspace administrative forces are also important. Our fieldwork and interviews at a county-level cyberspace administration office (CAO) in east China reveal that the local CAO had been rendered a “toothless tiger” with insufficient technology, power and labour. However, it has made up for these deficiencies by utilizing systems such as outsourced surveillance, organized mass reporting and personnel secondment. We contend that these practices, which we label “extra-institutional governance” (EIG), emerge when bureaucracies with limited resources face external pressures. The findings shed light on how censorship machines operate in local governments in China and reveal the general dynamics of how bureaucratic organizations adapt to environmental pressures.

The fall armyworm (FAW) Spodoptera frugiperda (J.E. Smith) is a highly damaging invasive omnivorous pest that has developed varying degrees of resistance to commonly used insecticides. To investigate the molecular mechanisms of tolerance to tetraniliprole, spinetoram, and emamectin benzoate, the enzyme activity, synergistic effect, and RNA interference were implemented in S. frugiperda. The functions of cytochrome P450 monooxygenase (P450) in the tolerance to tetraniliprole, spinetoram, and emamectin benzoate in S. frugiperda was determined by analysing changes in detoxification metabolic enzyme activity and the effects of enzyme inhibitors on susceptibility to the three insecticides. 102 P450 genes were screened via transcriptome and genome, of which 67 P450 genes were differentially expressed in response to tetraniliprole, spinetoram, and emamectin benzoate and validated by quantitative real-time PCR. The expression patterns of CYP9A75, CYP340AA4, CYP340AX8v2, CYP340L16, CYP341B15v2, and CYP341B17v2 were analysed in different tissues and at different developmental stages in S. frugiperda. Silencing CYP340L16 significantly increased the susceptibility of S. frugiperda to tetraniliprole, spinetoram, and emamectin benzoate. Furthermore, knockdown of CYP340AX8v2, CYP9A75, and CYP341B17v2 significantly increased the sensitivity of S. frugiperda to tetraniliprole. Knockdown of CYP340AX8v2 and CYP340AA4 significantly increased mortality of S. frugiperda to spinetoram. Knockdown of CYP9A75 and CYP341B15v2 significantly increased the susceptibility of S. frugiperda to emamectin benzoate. These results may help to elucidate the mechanisms of tolerance to tetraniliprole, spinetoram and emamectin benzoate in S. frugiperda.

The laboratory generation and diagnosis of uniform near-critical-density (NCD) plasmas play critical roles in various studies and applications, such as fusion science, high energy density physics, astrophysics as well as relativistic electron beam generation. Here we successfully generated the quasistatic NCD plasma sample by heating a low-density tri-cellulose acetate (TCA) foam with the high-power-laser-driven hohlraum radiation. The temperature of the hohlraum is determined to be 20 eV by analyzing the spectra obtained with the transmission grating spectrometer. The single-order diffraction grating was employed to eliminate the high-order disturbance. The temperature of the heated foam is determined to be T = 16.8 ± 1.1 eV by analyzing the high-resolution spectra obtained with a flat-field grating spectrometer. The electron density of the heated foam is about $N_e=4.0\pm 0.3\times {10}^{20}{\text{cm}}^{-3}$ under the reasonable assumption of constant mass density.

There is still controversy about optimal dietary iodine intake as the Universal Salt Iodization policy enforcement in China. A modified iodine balance study was thus conducted to explore the suitable iodine intake in Chinese adult males using the iodine overflow hypothesis. In this study, thirty-eight apparently healthy males (19·1 (sd 0·6) years) were recruited and provided with designed diets. After the 14-d iodine depletion, daily iodine intake gradually increased in the 30-d iodine supplementation, consisting of six stages and each of 5 d. All foods and excreta (urine, faeces) were collected to examine daily iodine intake, iodine excretion and the changes of iodine increment in relation to those values at stage 1. The dose–response associations of iodine intake increment with excretion increment were fitted by the mixed effects models, as well as with retention increment. Daily iodine intake and excretion were 16·3 and 54·3 μg/d at stage 1, and iodine intake increment increased from 11·2 μg/d at stage 2 to 118·0 μg/d at stage 6, while excretion increment elevated from 21·5 to 95·0 μg/d. A zero iodine balance was dynamically achieved as 48·0 μg/d of iodine intake. The estimated average requirement and recommended nutrient intake were severally 48·0 and 67·2 μg/d, which could be corresponded to a daily iodine intake of 0·74 and 1·04 μg/kg per d. The results of our study indicate that roughly half of current iodine intakes recommendation could be enough in Chinese adult males, which would be beneficial for the revision of dietary reference intakes.

The microstructure and texture evolution of Ni-5 at%W (Ni5W) alloy substrates were investigated by in situ tensile testing along the rolling direction (RD), transverse direction (TD), and at 45° to the RD (45°-RD), as well as by electron backscatter diffraction characterization. The tensile stress direction had a significant influence on the texture evolution. The cubic texture in the Ni-5 at%W alloy exhibited severe degradation when the tensile angle was 45°-RD. In contrast, the cubic texture was relatively stable under high deformation along the RD or TD. It was found that the slip line system in the 45°-RD specimen was the key to the contrasting behavior. The effect of the tensile testing angle on the cubic texture evolution for Ni–W substrates was investigated, and the corresponding effect on the superconducting properties of coated materials was studied.

Answer selection, ranking high-quality answers first, is a significant problem for the community question answering sites. Existing approaches usually consider it as a text matching task, and then calculate the quality of answers via their semantic relevance to the given question. However, they thoroughly ignore the influence of other multiple factors in the community, such as the user expertise. In this paper, we propose an answer selection model based on the user expertise modeling, which simultaneously considers the social influence and the personal interest that affect the user expertise from different views. Specifically, we propose an inductive strategy to aggregate the social influence of neighbors. Besides, we introduce the explicit topic interest of users and capture the context-based personal interest by weighing the activation of each topic. Moreover, we construct two real-world datasets containing rich user information. Extensive experiments on two datasets demonstrate that our model outperforms several state-of-the-art models.

Deformable linear objects (DLOs) have a wide variety of applications in a range of fields. Their key characteristic is that they extend much further in one of their dimensions than in the other two. Accurate motion planning is particularly important in the case of DLOs used in robotics applications. In this paper, a new strategy for planning the motions of DLOs under multiple constraints is proposed. The DLO was modeled as Cosserat elastic rods so that the deformation is simulated accurately and efficiently. The control of the motion of the DLO was enhanced by supplementing one gripper installed at each end with additional supports. This allows DLOs to undergo complex deformations, and thus avoid collisions during motion. The appropriate number of supports and their positions were determined, and then a rapidly exploring random tree algorithm was used to search for the best path to guide the DLO toward its target destination. The motion of the simulated DLO is described as it is controlled using two grippers and specific numbers of supports. To prove that the proposed DLO motion planning strategy can successfully guide relatively long DLOs through complex environments without colliding with obstacles, a case study of the strategy was conducted when guiding a DLO through a puzzle.

The plasma in the scrape-off layer (SOL) has an important effect on the coupling of the waves in the ion cyclotron range of frequencies (ICRF). The high-frequency B-dot (HFB) probes have been installed to investigate the behaviour of ICRF waves on EAST. The fast and slow ICRF wave field amplitudes are measured and a domain parallel wavenumber is deduced. Results of measurements on a test experimental platform and EAST experiments are presented, which include vacuum and plasma situations. In vacuum it is found that field amplitudes increase linearly with ICRF power. Besides, during plasma operation, field amplitudes measured were decreased by an order of magnitude and no linear relation with power was observed. Fast and slow wave power densities fluctuate strongly with plasma density. The experimental results in the laboratory coincide with the simulation results and allow for validating of the measurement method.

Al–12.6Si was annealed at both 500 and 560 °C for different lengths of time in this study. Additionally, the effects of annealing treatment on the spheroidization of eutectic Si and the mechanical properties of the Al–Si alloy have been investigated. The morphology of these particles was described using surface shape factor (φ), and it was found that the optimal annealing time of Al–12.6Si at 500 and 560 °C is seven hours and five hours, respectively. The average size of the Si particles in the Al–Si alloy annealed at 500 °C is less than that of the particles at 560 °C. The roundness of the Si particles within the Al–Si alloy annealed at 500 °C is slightly better than that at 560 °C. The elongation of the alloy apparently increases, while the tensile strength of the Al–Si alloy decreases. The tensile strength and elongation of the eutectic Al–Si alloy annealed at 500 °C is higher than that at 560 °C.

The experiments reported in this research communication aimed to plot the expression pattern of Sirt3, a master regulator of energy metabolism and antioxidation defence, in the liver of dairy goats during perinatal period. Ten healthy dairy goats in late pregnancy were chosen, and needle biopsy was applied to collect liver samples at 1-week intervals. Protein levels of hepatic Sirt3 were analysed by western-blotting. Serum enzyme activities of manganese superoxide dismutase (Mn-SOD) and non-esterified fatty acids (NEFA) levels were measured, and their correlation with Sirt3 mRNA levels was also estimated. Compared with >3-week before parturition (BP), Sirt3 proteins were significantly reduced at 1-week after parturition (AP) and 2-week AP (P < 0·05), but increased on the day of parturition (P < 0·01). Correlation analysis revealed a positive association between hepatic Sirt3 mRNA levels and serum enzyme activity of Mn-SOD (r = 0·46), but a negative association between that and serum NEFA levels (r = −0·41). These data indicate that the decreased hepatic expression of Sirt3 might be one of the reasons that dairy goats undergo oxidative stress after parturition.

Charged particle diagnostics is one of the required techniques for implosion areal density diagnostics at the SG-III facility. Several proton spectrometers are under development, and some preliminary areal density diagnostics have been carried out. The response of the key detector, CR39, to charged particles was investigated in detail. A new track profile simulation code based on a semi-empirical model was developed. The energy response of the CR39 detector was calibrated with the accelerator protons and alphas from a 241Am source. A proton spectrometer based on the filtered CR39 detector was developed, and D–D primary proton measurements were implemented. A step range filter spectrometer was developed, and preliminary areal density diagnostics was carried out. A wedged range filter spectrometer array made of Si with a higher resolution was designed and developed at the SG-III facility. A particle response simulation code by the Monte Carlo method and a spectra unfolding code were developed. The capability was evaluated in detail by simulations.

White sponge nevus (WSN) in the oral mucosa is a rare autosomal dominant genetic disease. The involved mucosa is white or greyish, thickened, folded and spongy. The genes associated with WSN include mutant cytokeratin keratin 4 (KRT4) and keratin 13 (KRT13). In recent years, new cases of WSN and associated mutations have been reported. Here, we summarise the recent progress in our understanding of WSN, including clinical reports, genetics, animal models, treatment, pathogenic mechanisms and future directions. Gene-based diagnosis and gene therapy for WSN may become available in the near future and could provide a reference and instruction for treating other KRT-associated diseases.

Based on the samples collected in Chinese scientific surveys off the Costa Rica Dome from July to August in 2009, statolith microstructure of the jumbo flying squid, Dosidicus gigas, was analysed for studying their age, growth and population structure. Three typical growth zones (postnuclear, dark and peripheral zones), abnormal increments (checks) and aberrant microstructure (additional centre and additional rings) were found in the statoliths examined. Squid sizes ranged from 205 to 429 mm dorsal mantle length (ML) with ages no more than 10 months for females and 8 months for males. Back-calculated hatching dates were from November 2008 to April 2009. Growth in ML was best described by a linear function for both the sexes, while growth in body weight was best quantified by an exponential function for females and a power curve for males. The maximum absolute daily growth rates and instantaneous growth rate in ML were reached during 181–210 and 151–180 days for females and males, respectively. The Costa Rica Dome and its adjacent waters were considered as a potential spawning ground because of presence of not only high proportion of mature squid but also rhynchoteuthion paralarvae, and high primary productivity from the strong upwelling. This study suggests that D. gigas have complicated intra-specific population structure and large spatial variability in the key life history parameters.

Pure and neodymium-doped gadolinium calcium oxoborate crystals of high quality were grown by the Czochralski method. The orientation of crystal was precisely determined, and the samples for measurements were prepared. Through synchrotron x-ray topography and high-resolution x-ray diffractometry, the twin structure was discovered. Some properties such as the figure of merit value, and dielectric, piezoelectric, and elastic constants were measured along with a discussion of the anisotropy of the laser properties.

A new approach to the synthesis of a novel silicon-containing polyester by noncarbothermal method directly from SiO2 was studied. At first, a high reactive pentacoordinate organic silicon compound (KSi(OCH2CH2O)2(OCH2CH2OH)) was prepared by the reaction of the fumed silica with ethylene glycol (EG) and KOH. Then, a novel double hydroxy tetracoordinate silicon monomer (OCH2CH2O)Si(OCH2CH2OH)(OCH2CH2OCH2CH2OH) was synthesized by the reaction of ClCH2CH2OH with reactive pentacoordinate silicon compound. Finally, a silicon-containing polyester was synthesized by low temperature solution condensation between tetracoordinate silicon compound and p-phthaloyl chloride in dimethyl sulfoxide (DMSO). The product was characterized by FTIR, TG, GPC, etc. The IR spectra of polyester exhibited a characteristic strong absorption band for ester carbonyl in the 1722.2cm-1. IR spectra also showed absorption at 1124.6cm-1 due to the O-Si-O group. TG analysis showed its good thermal stability. GPC analysis showed that the number average molecular weight of this siliconcontaining polyester was about ninety thousand.

Experimentally observed X-ray reflectivity curves show bi-crystal(twin) characteristics. The study revealed that there was defect segregation at the twin boundary. Stress was relaxed at the edge of the boundary. Relaxation of the stress resulted in formation of twin and other defects. As a result of formation of such defects, a defect-free and stress-free zone or low defect density and small stress zone is created around the defects. So a twin model was proposed to explain the experimental results. Stress(mainly thermal stress), chemical stoichiometry deviation and impurities nonhomogeneous distributions are the key factors that cause twins in LEC InP crystal growth. Twins on (111) face in LEC InP crystal were studied. Experimental evidence of above mentioned twin model and suggestions on how to get twin-free LEC InP single crystals will be discussed.